Pavel:
Thanks much, that does the trick. I've spent a great deal of time
researching this but that's the first reference to sd_mod I've seen. I
had some files on a zip100 disk that I needed to get at. Tnx.
Pavel wrote:
Try modprobe sd_mod and see if you can mount your ZIP drive. I had to
add
Title: RE: Zip 100 Parallel Drive -
Try modprobe sd_mod and see if you can mount your ZIP drive. I had to add 'above ppa sd_mod' line to my modules.conf file.
Pavel.
> -Original Message-
> From: Bob Goodwin [mailto:[EMAIL PROTECTED]]
> Sent: Thu, December 12
Jim Kaufman wrote -
"Put a zip disk into the drive, and as root try 'fdisk -l /dev/sda',
then try 'fdisk -l /dev/sdb', etc. and look for a response. It is
possible that the zip disk is not set up to use partition 4 (though
that is the expected behavior), or perhaps you have some other SCSI
devices
On Thu, Dec 12, 2002 at 01:38:42PM -0500, Bob Goodwin wrote:
> I am trying to install a zip100 parallel port drive that I have used on
> two other RH-7.3 computers and keep getting an error message -
>
> [root@box1 root]# mount /dev/sda4
> mount: /dev/sda4 is not a valid block device
>
> dmesg y
