On Sat, 2004-12-18 at 19:37, Sonawane Satish wrote:
> One last question:
> Is the method of calculation of modeline from
> horizontal, vertical
> frequencies and using it standard ? AlsoI don't know
> how to calculate one
> manually.
There is a program
$ xvidtune -show
I don't know how it will
Hi,
I tried to run Sax2, but it didn't showup anything i.e
no UI.
I tried to compare the XF86Config files for SuSe9.2
installation and teh
one which gets generated on running Knoppix.
I found that in case of knoppix the Monitor subsection
has DDC probed Horizontal sync. &
vertical refresh are as
Hi!
> Won't it cause a problem if the driver is meant for
> lower kernel version?
Oh yes I completely forgot about that. Most probably it'll be a problem. I was
for me when I tried to use 2.4.x drivers with 2.6.x kernel. :-(
> GOTO the site mentioned in my earlier mail... there are specifically
>
On Tue, 14 Dec 2004 22:21:56 +0530, Kapil D. Pendse
<[EMAIL PROTECTED]> wrote:
> Hi!
>
> > I have downloaded the conexant driver, (the last free
> > one from http://int21.de/conexant/ ).IT should be
> > proabbly for lower kernel version, than taht of SuSe
> > 9.2.
> > Could you give directions on
Won't it cause a problem if the driver is meant for
lower kernel version?
--- "Kapil D. Pendse" <[EMAIL PROTECTED]> wrote:
> Hi!
>
> > I have downloaded the conexant driver, (the last
> free
> > one from http://int21.de/conexant/ ).IT should be
> > proabbly for lower kernel version, than taht of
Yes I am using Conexant modem with following specs.
HSF 56K DataFax voice Speakerphone, PCI HSFI modem
(rev01), Soft K56.
I will try the appropriate dirver from the site you
have mentioned.
--- Aditya Laghate <[EMAIL PROTECTED]> wrote:
> On Mon, 13 Dec 2004 20:37:25 -0800 (PST), Sonawane
> Satish
On Mon, 13 Dec 2004 20:37:25 -0800 (PST), Sonawane Satish
<[EMAIL PROTECTED]> wrote:
> Hi,
> I have downloaded the conexant driver, (the last free
> one from http://int21.de/conexant/ ).IT should be
> proabbly for lower kernel version, than taht of SuSe
> 9.2.
> Could you give directions on how to
Hi!
> I have downloaded the conexant driver, (the last free
> one from http://int21.de/conexant/ ).IT should be
> proabbly for lower kernel version, than taht of SuSe
> 9.2.
> Could you give directions on how to use it?
Decompress the driver file you downloaded and read instructions given in file
Hi,
I have downloaded the conexant driver, (the last free
one from http://int21.de/conexant/ ).IT should be
proabbly for lower kernel version, than taht of SuSe
9.2.
Could you give directions on how to use it?
--- "Kapil D. Pendse" <[EMAIL PROTECTED]> wrote:
> Hi!
>
> > I am in a similar situatio
Thanks to everyone who have tried to figure out the
problem.
I will try the suggetions today and will come up with
results tommorow.
Also I checked the following log after using X
command:
/var/log/Xorg.0.0.log
For all display modes which include resolution and
frequency, I found a warning :
mode
Hi!
> I am in a similar situation. The difference is that Suse 9.2 detects the
> modem and shows it configured as modem0 in Yast but still does not work
> in kppp. Over the last 10 days I am tried lots of different modems. They
> all get detected but do not work . SO this is definately a kernal
>
Dear Satish,
I am in a similar situation. The difference is that Suse 9.2 detects the
modem and shows it configured as modem0 in Yast but still does not work
in kppp. Over the last 10 days I am tried lots of different modems. They
all get detected but do not work . SO this is definately a kernal
On Monday 13 December 2004 09:52, Sonawane Satish wrote:
> Hi,
> I am facing following problems with SuSe 9.2.
> 1. While installation of SuSe 9.2, I had to choose
> Text mode as screen was turning blank as soon as Yast
> started. I had thought that there might be a display
> driver problem, which
Hi!
> 2. I have a PCI modem. I tried to configure modem
> using yast. Currently it shows following options as
> possible modems : /dev/modem, usb ports, serial ports,
> parallel ports. It also says that currently no modem
> detected.
> How can I get to work the PCI modem?
check out linmodems.org /
Hi,
I am facing following problems with SuSe 9.2.
1. While installation of SuSe 9.2, I had to choose
Text mode as screen was turning blank as soon as Yast
started. I had thought that there might be a display
driver problem, which would get fixed after
installation. After installation I found that n
15 matches
Mail list logo
