On 10/10/2014 07:58, Dirk Neukirchen wrote:
> Browsing the buildbots I saw both ramips and ramips.rt3883 [1],[2] fail
>
> with:
> drivers/i2c/busses/i2c-ralink.c:31:26: fatal error: linux/of_i2c.h: No such
> file or directory
> #include
>
> linux/of_i2c.h is introduced in:
> https://dev.openwrt
Hi Basti,
I support your changes to dnsmaq init, as this addresses a real use-case to
enhance wireless roaming in our Freifunk mesh as well.
Greetings Thomas
On 09.10.2014, at 17:07, Bastian Bittorf wrote:
> [dnsmasq] support enforced start-IP, end-IP, netmask
>
> there are corner cases wher
On 7 October 2014 08:32, Roman Yeryomin wrote:
> Signed-off-by: Roman Yeryomin
> ---
> target/linux/rb532/config-3.14 | 148
> +
> .../rb532/patches-3.14/001-cmdline_hack.patch | 20 +++
> .../rb532/patches-3.14/002-rb532_nand_fixup.patch | 47 +++
Error reported by buildbot:
Package kmod-at91-adc is missing dependencies for the following libraries:
input-core.ko
only compile tested
Signed-off-by: Dirk Neukirchen
---
target/linux/at91/modules.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/at91/modules
Signed-off-by: Eddi De Pieri
---
package/kernel/lantiq/ltq-vdsl-fw/Makefile |2 +-
package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh | 10 +-
package/kernel/lantiq/ltq-vdsl-fw/src/w921v_fw_cutter.c |2 +-
3 files changed, 7 insertions(+), 7 deletions(-)
d
and that works ? last i tried on 32 or 34 and it failed horribly ...
On 10/10/2014 14:54, Eddi De Pieri wrote:
>
> Signed-off-by: Eddi De Pieri ---
> package/kernel/lantiq/ltq-vdsl-fw/Makefile |2 +-
> package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh | 10
> +--
Hi John,
maybe you can try this together with the driver update you reverted again?
I know that there are sometimes dependencies which are not obvious.
I don't have more details on this, maybe I can check for the versions with my
colleague,
when he is back from vacation.
Best Regards,
Thomas
--
Formally this patch is good for me but I have no dsl connection and here is
annexa.
Someone can try this out?
Regards.
Eddi
On Fri, Oct 10, 2014 at 2:54 PM, Eddi De Pieri wrote:
>
> Signed-off-by: Eddi De Pieri
> ---
> package/kernel/lantiq/ltq-vdsl-fw/Makefile |2 +-
> pac
Hi,
the driver works for me with the current firmware. if lantiq has an
interest in an update then feel free to send patches.
John
On 10/10/2014 15:21, thomas.lan...@lantiq.com wrote:
> Hi John,
>
> maybe you can try this together with the driver update you reverted again?
> I know that the
Yes, x86_64 needs a lot of clean up to do. It’s a lot big and including too
many unused modules in the kernel. Thanks.
Ning
From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] On Behalf
Of William Haynes
Sent: Thursday, October 09, 2014 12:17 PM
To: Dirk Neukirchen
Cc: o
Signed-off-by: Hans Dedecker
---
device.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/device.h b/device.h
index 08a3055..73b2656 100644
--- a/device.h
+++ b/device.h
@@ -11,8 +11,8 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Pub
As the PPP main device (either a simple or old style vlan device) is freed when
PPP interfaces are reloaded; interface device specific config (eg
mtu/macaddr/...) is lost as the interface config is not re-applied on the newly
created device.
Patch fixes the issue by re-applying the interface dev
Patch allows to configure the mtu of the dynamic 6rd tunnel interface when
created by dhcp script.
In some setups it's desirable to have config control over the 6rd tunnel mtu to
maximize the traffic throughput
Signed-off-by: Hans Dedecker
---
package/network/config/netifd/files/lib/netifd/dhc
Congratulations! (a little late ...)
On Thu, 2014-10-02 at 14:59 +0200, Steven Barth wrote:
> The OpenWrt developers are proud to announce the final release
> of OpenWrt Barrier Breaker.
>
>___ __
> | |.-.-.-.| | | |..| |_
>
> i would like to update the kernel, but just changing
> the entry in 'target/linux/ar71xx/Makefile' to
>
> LINUX_VERSION:=3.10.57
>
> will not work, because some patches cannot be applied
> anymore. (it works without probs till 3.10.55).
> the question is: can somebody give me a hint about the
>
From: Federico Di Marco fede...@gmail.com
Body of explanation:
A new package has been added in packages feed under net/sstp-client
directory, porting a simple SSTP client for Linux (please see
http://sstp-client.sourceforge.net) to OpenWRT. There was also an old
ticket requesting the porting of th
7Links PX-4885 (clones) can also be purchased with 8MB flash.
Creating images for these routers, use dtsi for common part
Signed-off-by: Cezary Jackiewicz
---
diff --git a/target/linux/ramips/dts/PX4885.dts
b/target/linux/ramips/dts/PX4885.dts
deleted file mode 100644
index 2bea444..000
Eddi De Pieri (8):
vgv7519: backport vgv7519 dts
lantiq: fix pinctrl-xway
lantiq: remove strip-fcs patch that seems to introduce regression on
multiple devices
vgv7519: extract wifi firmware from mtd
mac80211: add support for rf5362 (needed by vgv7519 wifi)
lantiq: enable pci bus
Signed-off-by: Eddi De Pieri
---
target/linux/lantiq/dts/VGV7519.dtsi | 53
target/linux/lantiq/dts/VGV7519BRN.dts |6
target/linux/lantiq/dts/VGV7519NOR.dts |6
3 files changed, 38 insertions(+), 27 deletions(-)
diff --git a/target/linux/l
Signed-off-by: Eddi De Pieri
---
.../lantiq/patches-3.10/0150-lantiq-pinctrl-xway.patch | 15 +++
1 file changed, 15 insertions(+)
create mode 100644
target/linux/lantiq/patches-3.10/0150-lantiq-pinctrl-xway.patch
diff --git a/target/linux/lantiq/patches-3.10/0150-lantiq-pinctr
Signed-off-by: Eddi De Pieri
---
.../linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
b/target/linux/lantiq/base-files/etc/hotplug.d/fir
Signed-off-by: Eddi De Pieri
---
.../lantiq/patches-3.10/0208-lantiq-xrx200-strip-fcs.patch | 11 ---
1 file changed, 11 deletions(-)
delete mode 100644
target/linux/lantiq/patches-3.10/0208-lantiq-xrx200-strip-fcs.patch
diff --git
a/target/linux/lantiq/patches-3.10/0208-lantiq-xr
Signed-off-by: Eddi De Pieri
---
.../patches/925-rt2x00-backport_rf5362.patch | 79
1 file changed, 79 insertions(+)
create mode 100644
package/kernel/mac80211/patches/925-rt2x00-backport_rf5362.patch
diff --git a/package/kernel/mac80211/patches/925-rt2x00-backpor
Signed-off-by: Eddi De Pieri
---
target/linux/lantiq/xrx200/config-default |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/lantiq/xrx200/config-default
b/target/linux/lantiq/xrx200/config-default
index 09dfbdd..89afcf9 100644
--- a/target/linux/lantiq/xrx200/
Signed-off-by: Eddi De Pieri
---
.../0151-lantiq-ifxmips_pcie-use-of.patch | 51
1 file changed, 51 insertions(+)
create mode 100644
target/linux/lantiq/patches-3.10/0151-lantiq-ifxmips_pcie-use-of.patch
diff --git
a/target/linux/lantiq/patches-3.10/0151-lanti
Signed-off-by: Eddi De Pieri
---
target/linux/lantiq/dts/VGV7519.dtsi |6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/target/linux/lantiq/dts/VGV7519.dtsi
b/target/linux/lantiq/dts/VGV7519.dtsi
index 05c8aea..9af08a7 100644
--- a/target/linux/lantiq/dts/VGV7519.dtsi
Is anyone using/working on this router so far ? There has been a lot of
discussion on the list in the past about it as the promised successor of
famous WRT54G.
I got one of these a while ago and since them I have been in contact
several times with some people Linksys/Belkin team who was respon
Pushpal Sidhu schrieb am 09.10.2014 02:51:
> This fix is for anyone on 3.10 using the pca953x driver. A regression
> was introduced when this driver was converted to using 8-bit
> reads/writes the bitmask in pca953x_gpio_get_value wasn't adjusted with
> the modulus BANK_SZ and consequently looks at
Hi,
Stefan Monnier writes:
> AFAICT OpenWRT comes with some support for the Hame MPR-A1 thingy
> (although its 16MB of RAM and 4MB of flash probably prevent it from
> being fully supported).
All the recent "2G/3G/4G WiFi routers" (both with and without batteries)
I and my friends were buying fro
---
Without these, my earlyprintk configuration was being lost.
-John
target/linux/generic/config-3.14 | 5 +
1 file changed, 5 insertions(+)
diff --git a/target/linux/generic/config-3.14 b/target/linux/generic/config-3.14
index 830efff..5f16281 100644
--- a/target/linux/generic/config-3.14
On 09/29/14 01:03, Denis Shulyaka wrote:
Hi,
I'm currently packaging a 2.11.1 version. Here is the link:
http://shulyaka.org.ru/pub/tinycdb.tar.gz
http://shulyaka.org.ru/pub/postfix.tar.gz
I just downloaded the sources.
1. After adding pcre libraries it does compile without errors against
h
31 matches
Mail list logo
