On 23/07/2014 17:33, Roman Yeryomin wrote:
> On 23 July 2014 18:26, L. D. Pinney wrote:
>> The WR8305RT may be the same as the WA05I have asked ZBT.
>>
>> One difference is uboot is set for 57600 on my WR8305RT...meaning
>> I'll need to patch the WA05 dts to use it. Or "update" the
>> uboot
On 24 July 2014 11:51, John Crispin wrote:
>
>
> On 23/07/2014 17:33, Roman Yeryomin wrote:
>> On 23 July 2014 18:26, L. D. Pinney wrote:
>>> The WR8305RT may be the same as the WA05I have asked ZBT.
>>>
>>> One difference is uboot is set for 57600 on my WR8305RT...meaning
>>> I'll need to pa
Compile tested all subtargets and profiles.
Unfortunately I don't own any board affected by these changes, so no run tests.
Signed-off-by: Roman Yeryomin
---
.../ramips/base-files/etc/uci-defaults/02_network | 36 ---
.../ramips/base-files/lib/preinit/06_set_iface_mac | 109 ---
On 20 July 2014 12:48, Roman Yeryomin wrote:
> On 20 July 2014 12:15, John Crispin wrote:
>>
>>
>> On 20/07/2014 10:36, 郭传鈜 wrote:
>>> I think I should reply to the mail list right ... I can't use my
>>> USB Modem with "ohci-platform" in current kernel…only "USB is
>>> connected(disconnected)"in
Today, Lenovo released a new product，an 11ac wireless router base MTK's
mt7620a + mt7612e evaluation board.
It has Two GE ports(RTL8211E) and 4 FE ports(Internal switch),256MByte
DDR2, 3xUSB 2.0.
This patch will make openwrt support it.
Sorry for my pool english,tks at all.
Regards, Lintel
Signe
On 24 July 2014 17:04, Lintel Huang wrote:
>
> Today, Lenovo released a new product，an 11ac wireless router base MTK's
> mt7620a + mt7612e evaluation board.
> It has Two GE ports(RTL8211E) and 4 FE ports(Internal switch),256MByte DDR2,
> 3xUSB 2.0.
> This patch will make openwrt support it.
sound
>>> Hi Roman,
>>>
>>> do you have this board ? could you see if it also fails for you
>>> ? i don't actually have any mt7620n hw with usb exported i
>>> think...
>>>
>>
>> I remember using ohci/ehci drivers for mt7620n boards (because
>> otg driver didn't work at all) but not sure if I tried an
Introduce a new config symbol EXTRACT_DEBUGINFO to extract debuginfo
from all binaries. This depends on USE_STRIP and DEBUG.
The debuginfo of all packages will be extracted from the binary
and copied into "bin/$platform/debuginfo".
This allows better debugging of coredumps by loading the debuginf
Working with trunk SVN version 41290.
I'm trying to tweak our setup to pass additional parameters on the command line
to hostapd, and I was hoping to configure that using /etc/config/wireless, in
the config wifi-device section.
So I added
option addl_param 'pval'
to the wifi-device config
Hi,
I would offer to do the job, but I down know what I need to do.
What are the requirements?
- technically (hardware/software equipment)
- knowledge (I don't call myself a programmer)
- permissions to which development environments
I modified ddns-scripts and luci-app-dd
Signed-off-by: Alex Henrie
---
applications/luci-ahcp/luasrc/model/cbi/ahcp.lua | 2 +-
.../luci-firewall/luasrc/model/cbi/firewall/zone-details.lua | 2 +-
.../luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua | 2 +-
applications/luci-watchcat/luasrc/model/cbi/
On Thu, 2014-07-24 at 21:17 +0200, Christian Schoenebeck wrote:
> Hi,
>
> I would offer to do the job, but I down know what I need to do.
> What are the requirements?
> - technically (hardware/software equipment)
> - knowledge (I don't call myself a programmer)
> - permissions to
Working unit ... I changed u-boot (now @115200 baud) and the ZBT-WA05 build
@r41824
Thanks
Larry
On Thu, Jul 24, 2014 at 4:10 AM, Roman Yeryomin
wrote:
> On 24 July 2014 11:51, John Crispin wrote:
> >
> >
> > On 23/07/2014 17:33, Roman Yeryomin wrote:
> >> On 23 July 2014 18:26, L. D. Pinney
Hi
I know we are close to BB release and ..., but do you plan to backport
r41815?
(ath9k: fix a long standing aggregation related tx lockup)
Thanks again for all the great work
Etienne
p.s: for now i have a cron doing "wifi restart" every hour on my 5 ubnt
bullet m2hp + 1 wr1043nd (still running
Hello,
I've got a problem where a single device (HP Pavilion Laptop running AR9285
bgn WiFi card) is causing a stack-trace/kernel panic on OpenWRT based
router (WD MyNet N750). This happens just when the laptop connects to the
WiFi network (which is running using "option noscan 1"). Up until this
No problem,why not? please give me address then I express it.
to Roman:
My boards 's GiGa Phy has three type,ICplus IP10001+, Marvell 88E5211
,RealTek RTL8211E,so I select it.
2014-07-24 23:14 GMT+08:00 Roman Yeryomin :
> On 24 July 2014 17:04, Lintel Huang wrote:
> >
> > Today, Lenovo releas
Hi, Lintel
On 25 July 2014 09:20, Lintel Huang wrote:
> No problem,why not? please give me address then I express it.
>
I guess Roman meant a patch like
http://patchwork.openwrt.org/patch/5970/, but I noticed that there
are MT7620A-based boards storing their MAC addresses in canonical
ASCII for
It doesn't seem to be used anywhere, it's incompatible with other
targets and can be confusing. People may think they need to update
section name every time they change VLAN ID (well, even I was doing
that).
Signed-off-by: Rafał Miłecki
---
target/linux/brcm47xx/base-files/etc/init.d/netconfig |
18 matches
Mail list logo
