Hi, I just tried sysupgrading a new head build for a Mikrotik 493G device (ar71xx 19.07.4 initramfs -> ath79 head) however I get the below "not enough PEBs" UBI failure and panic:
If I sysupgrade from an earlier git build (e.g. b7a8a5454226f34256c5d76480dda5abb1308395 ath79 initramfs -> ath79 head) it works fine, and I see it fixes the PEBs issue Any thoughts or ideas why flashing from ar71xx to ath79 blows this up? I ask as this would make migration from 19.07 to 20.xx painful for many. Thanks, Chris 19.07.04 sysupgrade log: root@OpenWrt:/# sysupgrade -F -v /tmp/openwrt-ath79-mikrotik-mikrotik_routerboard-493g-squashfs-sysupgrade.bin Invalid sysupgrade file. Image check failed but --force given - will update anyway! Cannot save config while running from ramdisk. Commencing upgrade. Closing all shell sessions. Watchdog handover: fd=3 - watchdog - killall: telnetd: no process killed Sending TERM to remaining processes ... odhcpd uhttpd ntpd udhcpc odhcp6c dnsmasq ubusd urngd logd rpcd netifd Sending KILL to remaining processes ... Performing system upgrade... Unlocking kernel ... Erasing kernel ... Writing data to block 0 at offset 0x0 Writing data to block 1 at offset 0x20000 Writing data to block 2 at offset 0x40000 Writing data to block 3 at offset 0x60000 Writing data to block 4 at offset 0x80000 Writing data to block 5 at offset 0xa0000 Writing data to block 6 at offset 0xc0000 Writing data to block 7 at offset 0xe0000 Writing data to block 8 at offset 0x100000 Writing data to block 9 at offset 0x120000 Writing data to block 10 at offset 0x140000 Writing data to block 11 at offset 0x160000 Writing data to block 12 at offset 0x180000 Writing data to block 13 at offset 0x1a0000 Writing data to block 14 at offset 0x1c0000 Writing data to block 15 at offset 0x1e0000 Writing data to block 16 at offset 0x200000 Writing data to block 17 at offset 0x220000 removing ubiblock0_1 [ 116.299696] block ubiblock0_1: released Volume ID 0, size 19 LEBs (2412544 bytes, 2.3 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "none", alignment 1 Volume ID 1, size 23 LEBs (2920448 bytes, 2.7 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs", alignment 1 Set volume size to 117579776 Volume ID 2, size 926 LEBs (117579776 bytes, 112.1 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs_data", alignment 1 sysupgrade successful Tail of subsequent latest kernel boot log: [ 1.887155] UBI: auto-attach mtd2 [ 1.890554] ubi0: attaching mtd2 [ 3.037225] ubi0: scanning is finished [ 3.104023] ubi0 error: ubi_read_volume_table: not enough PEBs, required 970, available 958 [ 3.112648] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd2, error -28 [ 3.119770] UBI error: cannot attach mtd2 [ 3.124398] /dev/root: Can't open blockdev [ 3.128559] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 3.136035] Please append a correct "root=" boot option; here are the available partitions: [ 3.144384] 1f00 256 mtdblock0 [ 3.144387] (driver?) [ 3.150932] 1f01 8192 mtdblock1 [ 3.150934] (driver?) [ 3.157476] 1f02 122624 mtdblock2 [ 3.157478] (driver?) [ 3.164004] 1f03 64 mtdblock3 [ 3.164006] (driver?) [ 3.170542] 1f04 44 mtdblock4 [ 3.170544] (driver?) [ 3.177070] 1f05 4 mtdblock5 [ 3.177072] (driver?) [ 3.183608] 1f06 4 mtdblock6 [ 3.183610] (driver?) [ 3.190146] 1f07 8 mtdblock7 [ 3.190148] (driver?) [ 3.196674] 1f08 4 mtdblock8 [ 3.196676] (driver?) [ 3.203212] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 3.211454] Rebooting in 1 seconds.. Same sections on a good install (where volume 2 now reports different sizes) removing ubiblock0_1 [ 1438.275670] block ubiblock0_1: released Volume ID 0, size 19 LEBs (2412544 bytes, 2.3 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "none", alignment 1 Volume ID 1, size 23 LEBs (2920448 bytes, 2.7 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs", alignment 1 Set volume size to 113262592 Volume ID 2, size 892 LEBs (113262592 bytes, 108.0 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs_data", alignment 1 [ 1443.243449] UBIFS (ubi0:2): default file-system created [ 1443.260078] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 2341 [ 1443.790864] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" [ 1443.798728] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 1443.808634] UBIFS (ubi0:2): FS size: 111865856 bytes (106 MiB, 881 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs) [ 1443.819240] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB) [ 1443.825859] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID A2702902-BDC0-4788-9F46-4DABF752DFE6, small LPT model [ 1443.875223] UBIFS (ubi0:2): un-mount UBI device 0 [ 1443.879994] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops sysupgrade successful [ 1.887155] UBI: auto-attach mtd2 [ 1.890554] ubi0: attaching mtd2 [ 3.037265] ubi0: scanning is finished [ 3.106483] ubi0: attached mtd2 (name "ubi", size 119 MiB) [ 3.112018] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 3.118892] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 3.125672] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 3.132624] ubi0: good PEBs: 958, bad PEBs: 0, corrupted PEBs: 0 [ 3.138625] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 3.145840] ubi0: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 1525706785 [ 3.154965] ubi0: available PEBs: 0, total reserved PEBs: 958, PEBs reserved for bad PEB handling: 20 [ 3.164282] ubi0: background thread "ubi_bgt0d" started, PID 381 [ 3.172265] block ubiblock0_1: created from ubi0:1(rootfs) [ 3.177817] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem [ 3.203242] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
