Hi Luka,
For me is the same... just to compliant comment inside source code:
/* on asterisk user's side, we're using port 1-2.
* Here in non normal human's world, we begin
* counting at 0.
*/
So you confirm that "TAPI/%s","1" map both port0 and port1 to TAPI/1 and
you can't use asterisk exten
Hi Eddi,
On Tue, Nov 11, 2014 at 07:11:13PM +0100, Eddi De Pieri wrote:
> it seems it work better in this way...
>
> chan = ast_channel_alloc(1, state, NULL, NULL, "", ext, ctx, 0, c,
> "TAPI/%d", (c + 1));
>
> I don't know so well asterisk programming... please let me know if it seems
> correct
it seems it work better in this way...
chan = ast_channel_alloc(1, state, NULL, NULL, "", ext, ctx, 0, c,
"TAPI/%d", (c + 1));
I don't know so well asterisk programming... please let me know if it seems
correct to you!
Eddi
On Tue, Nov 11, 2014 at 6:11 PM, Eddi De Pieri wrote:
> On Tue, Nov 1
On Tue, Nov 11, 2014 at 4:24 PM, Luka Perkov wrote:
> Hi Eddi,
>
> I don't remember if that worked on owsip. But asterisk should support
> both channels.
>
> What about TAPI/0? I am unsure if we started naming the channels from 0
> or 1...
>
> /* on asterisk user's side, we're using port 1-2.
*
Hi Eddi,
On Tue, Nov 11, 2014 at 04:10:30PM +0100, Eddi De Pieri wrote:
> asterisk:
> set debug output on console
> console => notice,warning,error,debug
>
> so, all software recognize correctly the correct port
>
> [Nov 11 15:08:06] DEBUG[894]: chan_lantiq.c:835 lantiq_dev_event_hook: on
>
Hi again,
asterisk:
set debug output on console
console => notice,warning,error,debug
so, all software recognize correctly the correct port
[Nov 11 15:08:06] DEBUG[894]: chan_lantiq.c:835 lantiq_dev_event_hook: on
port 0 detected event off hook
[Nov 11 15:08:10] DEBUG[894]: chan_lantiq.c:835
- tapidemo -d 1: (tapidemo-5.1.0.53)
phone1 connected:
[...]
EASY80910: Detected event on channel 0:
ID: 0x2005 (IFX_TAPI_EVENT_FXS_OFFHOOK)
[...]
phone2 connected:
EASY80910: Detected event on channel 1:
ID: 0x2005 (IFX_TAPI_EVENT_FXS_OFFHOOK)
Phone No 2: Event on
I've managed to get FXS working on my vgv7519 vr9 router using
asterisk-chan-lantiq.
busy/free tone ok
chan-lantiq to sip ok
sip to chan-lantiq to test.
I need to do some other tests before start to release code for BB...
Eddi
___
openwrt-devel mailing
Hi to all,
about gpio...
before starting tapidemo (or asterisk):
gpio8: dir/in alt0/0 alt1/0
gpio34: dir/in alt0/0 alt1/0
gpio35: dir/in alt0/0 alt1/0
gpio36: dir/in alt0/0 alt1/0
after starting tapidemo (or asterisk):
gpio8: dir/out alt0/1 alt1/0
gpio34: dir/out alt0/0 alt1/1
gpio35: dir/in al
Hi to all,
by manually setting correcly gpio like on original board with devmem:
root@OpenWrt:/# /etc/init.d/tapidemo start eth1
ITM version 0.0.0.27.
Compiled for EASY80910 with FXO (Slic121).
Filesystem firmware binary used (/lib/firmware/voice_ar9_firmware.bin).
VMMC [version 0x 0, type 0x
On 15/10/2014 12:10, thomas.lan...@lantiq.com wrote:
> Hello Eddi,
>
> Eddi De Pieri wrote on 2014-10-14:
>> Hi to all,
>>
>> I've applied to kernel patch for vpe committed for falcon, fixed
>> for vr9 ltq-vmmc, modified VGV7519 dts for passing new
>> parameters
>>
>> console=ttyLTQ0,115200 in
Hello Eddi,
Eddi De Pieri wrote on 2014-10-14:
> Hi to all,
>
> I've applied to kernel patch for vpe committed for falcon, fixed for
> vr9 ltq-vmmc, modified VGV7519 dts for passing new parameters
>
> console=ttyLTQ0,115200 init=/etc/preinit maxvpes=1 maxtcs=1 phym=64M
> mem=62M panic=1 vpe1_loa
Hi Mikko,
I've pushed my changes on https://github.com/openwrt-vgv7519/openwrt
(branch vgv7519-20141007-begin_vmmc)
If you want to try it on different router remember to adjust profiles
and dts like VGV7519.
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit maxvpes=1
maxtcs=1 phym=64M mem=62M
Hi to all,
I've applied to kernel patch for vpe committed for falcon, fixed for
vr9 ltq-vmmc, modified VGV7519 dts for passing new parameters
console=ttyLTQ0,115200 init=/etc/preinit maxvpes=1 maxtcs=1 phym=64M
mem=62M panic=1 vpe1_load_addr=0x83e0 vpe1_mem=2M
vpe1_wired_tlb_entries=1
Now I
Hi to all,
I've started to figure out how much work is needed to support fxs on vr9
board like mine.
On latest trunk :
- owsip is missing (i know is bugged with >32mbram)
- ltq-tapidemo is m issing
- lantiq falcon fxs support seems broken
It seems to me that by rebasing some patch for falcon sh
15 matches
Mail list logo
