2010/2/28 ZioPRoTo (Saverio Proto)
> > And packets are sent by the laptop but not received by the nanostation
> > according to tcpdump (attached) but they do if I use eth0 instead of eth1
> to
> > connect the laptop and the nanostation m5. Also I attach olsrd output
> with
> > -d 3.
>
> is eth1 i
> And packets are sent by the laptop but not received by the nanostation
> according to tcpdump (attached) but they do if I use eth0 instead of eth1 to
> connect the laptop and the nanostation m5. Also I attach olsrd output with
> -d 3.
is eth1 inside the bridge ? Try without the bridge.
Saverio
When you have an old working trunk version you can try to narrow down
the changeset that broke trunk. Check out revisions, compile, flash and
test.
Efficient is trying the circa middle between known broken and known
working revision. When broken then raise known broken revision. When
it's working l
2010/2/26 Xavier Martinez :
> eth1 is not working anymore in current trunk (r19860). It seems to work in
> previous versions (19694), at least pings are answered and ssh connection is
> possible.
>
> On the other hand, when running olsrd under r19694, packets from other hosts
> in the network are n
eth1 is not working anymore in current trunk (r19860). It seems to work in
previous versions (19694), at least pings are answered and ssh connection is
possible.
On the other hand, when running olsrd under r19694, packets from other hosts
in the network are not received by this interface. I verifi
