Le mercredi 19 août 2015 à 11:27 +0200, Jean-Michel Pouré - GOOZE a
écrit :
> > It is not possible, DHCPv6 doesn't carry routes. So you still need
> > RAs even with ra_management set to 2.
Please don't reply on the devel list. My messages are becoming messy and fill
the list.
Just use this ticke
Le mardi 18 août 2015 à 18:30 +0200, Steven Barth a écrit :
> It is not possible, DHCPv6 doesn't carry routes. So you still need
> RAs even with ra_management set to 2.
Sorry for this garbage, I just resend my email :
I spotted a problem with ra_management = 2
First configuration: stateful only
Le mardi 18 août 2015 à 18:30 +0200, Steven Barth a écrit :
> It is not possible, DHCPv6 doesn't carry routes. So you still need
> RAs even with ra_management set to 2.
I spotted a problem with ra_management = 2
First configuration: stateful only configuration/sbin/route -A inet6 Table de
routa
> Thanks ! I could update my docs and add acknowledgment for your kind
> help.http://wiki.openwrt.org/doc/howto/freebox?&#acknowledgmentsremerciements
> The only missing part in stateful only configuration is the the default IPv6
> gateway fe80::5642:49ff:fe87: on local network.
> Do you kno
Le mardi 18 août 2015 à 13:49 +0200, Steven Barth a écrit :
> Where you have option dhcpv6 and option ra you can add an option
> ra_management
> and set it to 0, 1 or 2.
>
> 0 means stateless only,
> 1 means stateless + stateful (default)
> 2 means stateful only
>
> Please note that stateful is
> I could solve all issues and write a complete HOWTO (in French only at
> first).http://wiki.openwrt.org/doc/howto/freebox
That is nice to hear.
> OpenWRT seems to provide at the same time stateful and stateless
> adressing.
Where you have option dhcpv6 and option ra you can add an option ra_
Le lundi 17 août 2015 à 20:32 +0200, Steven Barth a écrit :
> is clearly a stateful address (/128) and your host got the host-id
> 953 for stateful adressing. You should see the lease on the router
> in the WebUi or under /tmp/hosts/odhcpd. There you can also see the
> duid you need for adding the
> Okay, I got it, it works using 8 digits:0008
I am still having difficulties setting IPv6 gateway using DHCP only.
If using SLAAC, routes will propagate very well, but I end-up with
several IPv6. I don't want any derived IPv6 from MAC.
The client IP is 2a01:e35:87d8::::.
The c
Hi
On 2015-08-17, Jean-Michel Pouré - GOOZE wrote:
> Dear Steven,
>
> Thanks for this kind response.
>
> > " addr inet6: 2a01:e35:87d8:::953/128 Scope:Global"
>
> OK, I cannot find the lease in Luci, but here is /tmp/hosts/odhcpd
LuCI should show it on Status/ Overview, quite to the bottom
Le lundi 17 août 2015 à 20:32 +0200, Steven Barth a écrit :
> config host
> option duid '0012345678900...'
> option hostid 4
Okay, I got it, it works using 8 digits:0008
Will add it to the HOWTO and try to make a special howto on ipv6 delegation
sooner.
Kind regards,Jean-Miche
Dear Steven,
Thanks for this kind response.
> " addr inet6: 2a01:e35:87d8:::953/128 Scope:Global"
OK, I cannot find the lease in Luci, but here is /tmp/hosts/odhcpd
# br-lan 0004901071a15f278795aa0dd83bde8b 49874f74 - 1439881026 953
128 2a01:e35:87d8:::953/128
Is my duid 0004901071a
Hello Jean-Michel,
according to your Wiki-Entry stateful addressing does work,
no need to do anything with dnsmasq.
Quoting your ifconfig output
" addr inet6: 2a01:e35:87d8:::953/128 Scope:Global"
is clearly a stateful address (/128) and your host got the host-id
953 for stateful adressing.
Dear Steven,
Thank you for answering.
> I'm not sure what you are trying to accomplish. If you are connecting
> a router with a default
> OpenWrt image with default configuration to an ISP or IPv6 router
> which offers prefix delegation,
> everything works out of the box including client config
I'm not sure what you are trying to accomplish. If you are connecting a router
with a default
OpenWrt image with default configuration to an ISP or IPv6 router which offers
prefix delegation,
everything works out of the box including client configuration. You don't need
to touch a single
config
Dear all,
I currently writting a HOWTO for French Freebox users.
http://wiki.openwrt.org/doc/howto/freebox
We can obtain IPv6 address delegation an configure clients IPv6
staticly. We are using OpenWRT staging (latest dev).
What is the recommended way to serve ipv6 IPs to clients? I need to
serv
15 matches
Mail list logo
