Hi,
I understand its not good to mail like this, But I am quite new on this and
even no body knows in my friends about this. Could you please help
I hard coded the interface as below:
set | logger
[ "$ACTION" = "pressed" ] && [ "$BUTTON" = "lanwifi" ] &&
{
devstatus "eth0.2" | grep "up":
* John kerry [16.09.2015 12:18]:
> I am getting below log:
ok, i see: INTERFACE is not set, so you have to remove the check for
this var and hardcode it.
please stop sending mails like this, debug on your own with a local friend.
bye, bastian
___
open
Hi,
I am getting below log:
Sep 16 10:10:07 ST-MA_WIFI user.notice root: ACTION='released'
Sep 16 10:10:07 ST-MA_WIFI user.notice root: BUTTON='lanwifi'
Sep 16 10:10:07 ST-MA_WIFI user.notice root: CONFIG_APPEND=''
Sep 16 10:10:07 ST-MA_WIFI user.notice root: CONFIG_LIST_STATE='ntp_server'
Sep 16
* John kerry [16.09.2015 11:32]:
> even i checked on http://www.shellcheck.net/ , its not giving any feedback,
> it seems correct but still its not working.
add 1 line on top of your script for debugging:
set | logger
and check with 'logread -f' the output when you press the button.
bye, basti
Hi ,
[ "$ACTION" = "pressed" ] && [ "$BUTTON" = "lanwifi" ] && [ "$INTERFACE" =
"wan" ] &&
{
devstatus "$MYDEV" | grep '"up": true' &&
{
echo "" > /dev/console
echo "SWITCH TO RJ45" > /dev/console
echo "255" >
/sys/devices/platform/leds-gpio/leds/db120:green:st
* John kerry [16.09.2015 08:10]:
> Hi,
>
> I have changed the script as below:
>
> MYDEV='eth0.2'
>
> ["$ACTION" = "pressed" -a "$BUTTON" = "BUT_2" -a "INTERFACE" = 'wan'] &&
^^^ a space here, so [ "$ACTION" - the same at the end: 'wan' ]
use "$INTERFACE" with the '$'
please learn shell-sc
Hi,
I have tried script:
*["$ACTION" = "pressed" -a "$BUTTON" = "BUT_2"] && { ["${ACTION}" =
"ifup" -a "${INTERFACE}" = "wan"] && {echo "" > /dev/console
echo "SWITCH TO RJ45" > /dev/consoleecho "255" >
/sys/devices/platform/leds-gpio/leds/db120:green:status/brightness
Hi,
I have changed the script as below:
MYDEV='eth0.2'
["$ACTION" = "pressed" -a "$BUTTON" = "BUT_2" -a "INTERFACE" = 'wan'] &&
{
devstatus "$MYDEV" | grep '"up": true' &&
{
echo "255" >
/sys/devices/platform/leds-gpio/leds/db120:green:status/brightness
}
* John kerry [15.09.2015 13:44]:
> Hi,
>
> I have added following condition but its not working:
>
> MYDEV='eth0'
>
> if [ "$ACTION" = "pressed" -a "$BUTTON" = "BUT_2" ] && {
remove the 'if'
> devstatus "$MYDEV" | grep '"up": true' && {
> echo "255" >
> /sys/devices/platform/leds-gp
Hi,
If i am configuring below config under /etc/config/system file , The STATUS
LED working fine based on eth0 link up/down.
config led 'led_status'
option name 'STATUS'
option interval '50'
option sysfs 'db120:green:status'
option default '0'
option trigge
Hi,
I have added following condition but its not working:
MYDEV='eth0'
if [ "$ACTION" = "pressed" -a "$BUTTON" = "BUT_2" ] && {
devstatus "$MYDEV" | grep '"up": true' && {
echo "255" >
/sys/devices/platform/leds-gpio/leds/db120:green:status/brightness
}
}
fi
Am i doing any mistake or n
* John kerry [15.09.2015 08:52]:
> I have to write some condition in
> /etc/hotplug.d/button/50-wps/ file
>
> I have to configure cat /etc/hotplug.d/button/00-wps file for following
> condition:
> if [ "$BUTTON" = "BTN_2" ] && [ "$ACTION" = "pressed" ]; then
>
> I have to check eth0.1 if link is
On 15/09/2015 09:27, Rafał Miłecki wrote:
> On 15 September 2015 at 09:17, John kerry wrote:
>> Please can anyone reply
>
> Is someone here your paid support with 1h response time?
although i find this emails annoying and funny at the same time we can
probably assume that it is not him that th
On 15 September 2015 at 09:17, John kerry wrote:
> Please can anyone reply
Is someone here your paid support with 1h response time?
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt
Please can anyone reply
On Tue, Sep 15, 2015 at 2:16 PM, John kerry wrote:
> Hi,
>
> I have written the following condition in /etc/hotplug.d/button/50-wps file
> if [ "$ACTION" = "pressed" -a "$BUTTON" = "lanwifi" ]; then
> echo "" > /dev/console
> echo "SWITCH TO RJ45" > /dev/c
Hi,
I have written the following condition in /etc/hotplug.d/button/50-wps file
if [ "$ACTION" = "pressed" -a "$BUTTON" = "lanwifi" ]; then
echo "" > /dev/console
echo "SWITCH TO RJ45" > /dev/console
echo "255" >
/sys/devices/platform/leds-gpio/leds/db120:green:status/brigh
Hi,
I have to write some condition in
/etc/hotplug.d/button/50-wps/ file
I have to configure cat /etc/hotplug.d/button/00-wps file for following
condition:
if [ "$BUTTON" = "BTN_2" ] && [ "$ACTION" = "pressed" ]; then
I have to check eth0.1 if link is up then have ON status led otherwise OFF.
I
17 matches
Mail list logo
