Hi,
> > > + xiaomi,mir3g-v2)
> > > + wan_mac=$(mtd_get_mac_binary factory 0xe006)
> > > + ;;
> >
> > This can be merged with elecom,wrc-1167ghbk2-s|\ etc.
>
> I rebased to current master and added label_mac (as per Roger's
> suggestion), and since I can not be sure about all the o
Hi Roger,
Thank you for the review!
On Fri, Oct 11, 2019 at 07:14:25PM +0200, Roger Pueyo Centelles | Guifi.net
wrote:
> + xiaomi,mir3g-v2)
> + wan_mac=$(mtd_get_mac_binary factory 0xe006)
> + ;;
>
> You may want to add "label_mac=$wan_mac" there, if the MAC
Hi,
On Sat, Aug 31, 2019 at 11:32:33PM +0200, m...@adrianschmutzler.de wrote:
> > + xiaomi,mir3g-v2)
> > + ucidef_add_switch "switch0" \
> > + "2:lan:2" "3:lan:1" "4:wan" "6t@eth0"
> > + ;;
>
> "6t@eth0" and "6@eth0" should be the same, so this can be merge
Hi,
Mine were just suggestions; feel free to do it or not! :)
Roger
El 21/10/19 a les 14:53, John Crispin ha escrit:
> On 31/08/2019 23:32, m...@adrianschmutzler.de wrote:
>> "6t@eth0" and "6@eth0" should be the same, so this can be merged with
>> cudy,wr1000.
>
> I meant that part, sorry the ma
On 31/08/2019 23:32, m...@adrianschmutzler.de wrote:
"6t@eth0" and "6@eth0" should be the same, so this can be merged with
cudy,wr1000.
I meant that part, sorry the mail was sitting in my draft folder
John
___
openwrt-devel mailing list
open
Dear maintainers,
Do you request me to make all of the changes proposed by Roger
(including adding u-boot data? But the env partition is marked
read-only and most other targets do not do that)? Or the merging
proposed by Adrian?
Please clarify!
--
Be free, use free (http://www.gnu.org/philosoph
Hi Paul,
I opened a pull request on GitHub to support the Mi Router 4A Gigabit
Edition, which is essentially the same device. You can find it at
https://github.com/openwrt/openwrt/pull/2486
There are a few differences you may want to address:
>>> + xiaomi,mir3g-v2)
>>> + wan_mac=$(mt
Hi,
Thank you for the reviewing.
On Sat, Aug 31, 2019 at 11:32:33PM +0200, m...@adrianschmutzler.de wrote:
> > + xiaomi,mir3g-v2)
> > + ucidef_add_switch "switch0" \
> > + "2:lan:2" "3:lan:1" "4:wan" "6t@eth0"
> > + ;;
>
> "6t@eth0" and "6@eth0" should be
Hi,
additional comments below.
> -Original Message-
> From: Paul Fertser [mailto:fercer...@gmail.com]
> Sent: Mittwoch, 28. August 2019 11:09
> To: John Crispin
> Cc: openwrt-devel@lists.openwrt.org; Adrian Schmutzler
> ; Roger Pueyo Centelles
> ; Paul Fertser
> Subject: [PATCH v3] rami
- CMIIT ID: 2019AP2581
- SoC: MediaTek MT7621
- Flash:16MiB NOR SPI (GigaDevice GD25Q128B)
- RAM: 128MiB DDR3 (ESMT M15T1G1664A)
- Serial: As marked on PCB, 3V3 logic, baudrate is 115200, 8n1
- Ethernet: 3x 10/100/1000 Mbps (switched, 2xLAN + WAN)
- WIFI0:MT7603E 2.4GHz 802.11b/
10 matches
Mail list logo
