Am 15.12.2024 um 16:01 schrieb Felix Fietkau:
On 14.12.24 20:56, e9hack wrote:
Am 14.12.2024 um 12:02 schrieb Felix Fietkau:
On 14.12.24 11:47, e9hack wrote:
Hi,
it looks like that data.macaddr_base is always true even if no macaddr_base is
set:
Which context does this happen in - hostapd
Am 14.12.2024 um 12:02 schrieb Felix Fietkau:
On 14.12.24 11:47, e9hack wrote:
Hi,
it looks like that data.macaddr_base is always true even if no macaddr_base is
set:
Which context does this happen in - hostapd, wpa_supplicant, wdev.uc or all of
the above?
- Felix
The issue comes from
Am 14.12.2024 um 12:02 schrieb Felix Fietkau:
On 14.12.24 11:47, e9hack wrote:
Hi,
it looks like that data.macaddr_base is always true even if no macaddr_base is
set:
Which context does this happen in - hostapd, wpa_supplicant, wdev.uc or all of
the above?
- Felix
It occurs with hostapd
Hi,
it looks like that data.macaddr_base is always true even if no macaddr_base is
set:
--- a/package/network/config/wifi-scripts/files/usr/share/hostap/common.uc
+++ b/package/network/config/wifi-scripts/files/usr/share/hostap/common.uc
@@ -213,7 +213,9 @@ const phy_proto = {
i
Am 11.12.2024 um 11:50 schrieb John Crispin:
On 09.12.24 19:19, e9hack wrote:
3) vlan settings: vlan_no_bridge must be 0, if vlan_bridge isn't set and the
bridge configuration comes from a vlan file
It isn't possible to set vlan_no_bridge to 0.
are you sure about this ?
th
Am 10.12.2024 um 08:06 schrieb John Crispin:
Hi Hartmut
On 09.12.24 19:19, e9hack wrote:
2) wireless.wifi-xxx.json: reading of options with alias definitions don't work
can you elaborate on this one please ?
John
My 5g wifi wasn't detected properly:
config wifi-devi
Hi,
there are a few bugs in the new ucode scripts:
1) iface.uc, line no 104: WPA-EAP--SHA256 -> WPA-EAP-SHA256
2) wireless.wifi-xxx.json: reading of options with alias definitions don't work
3) vlan settings: vlan_no_bridge must be 0, if vlan_bridge isn't set and the
bridge configuration come
Am 30.07.2024 um 17:29 schrieb Daniel Golle:
On Tue, Jul 30, 2024 at 03:40:25PM +0200, e9hack wrote:
Hi,
if a process is started via procd in a jail and uses some files, changes to
those files outside the jail are not reflected inside the jail. For E.g.
dnsmasq runs in a jail. The
Hi,
if a process is started via procd in a jail and uses some files, changes to
those files outside the jail are not reflected inside the jail. For E.g.
dnsmasq runs in a jail. The configuration is changed, that only the host file
does change. Sending SIGHUP to dnsmasq results in reloading of
Hi,
after the update of hostapd from today, I see some exceptions at start
of hostapd:
Thu Jun 6 21:06:43 2024 daemon.notice hostapd: Exception in ubus
function: left-hand side is not a function In [anonymous function](),
file /usr/share/hostap/hostapd.uc, line 837, byte 50: called from
anonym
Am 26.02.2024 um 20:06 schrieb e9hack:
in the past, it was possible to enable compression in WinSCP. Currently WinSCP
reports an error when the copy operation starts:
Copying file
'D:\Download\carambola\openwrt-ath79-generic-tplink_archer-c7-v2-2-squashfs-sysupgrade-d240224.bin'
Am 06.04.2024 um 21:50 schrieb Robert Marko:
On Sat, 6 Apr 2024 at 21:47, Hartmut Birr wrote:
Hi,
I did change the Makefile for dnsmasq in the way that I give:
PKG_SOURCE_URL:=git://thekelleys.org.uk/dnsmasq.git
PKG_SOURCE_PROTO:=git
PKG_SOURCE_DATE:=2024-03-27
PKG_SOURCE_VERSION:=550c368ade
Hi,
I face a strange issue about the size of hostapd. If I build hostapd-openssl
only, the size of the hostapd binary is 1061680 bytes. If I add wpad-openssl as
module in addition, the size of hostapd is 798664 bytes only.
Regards,
Hartmut
.config for hostapd only:
#
# WirelessAPD
#
# CONFIG_
Am 01.04.2024 um 11:54 schrieb Robert Marko:
On Mon, 1 Apr 2024 at 11:25, e9hack wrote:
Am 01.04.2024 um 11:06 schrieb Robert Marko:
On Mon, 1 Apr 2024 at 10:32, e9hack wrote:
Am 01.04.2024 um 10:14 schrieb Robert Marko:
On Mon, 1 Apr 2024 at 06:29, e9hack wrote:
Hi,
I'm using
Am 01.04.2024 um 11:06 schrieb Robert Marko:
On Mon, 1 Apr 2024 at 10:32, e9hack wrote:
Am 01.04.2024 um 10:14 schrieb Robert Marko:
On Mon, 1 Apr 2024 at 06:29, e9hack wrote:
Hi,
I'm using a TP-LINK WDR3600 with a bigger flash. Since some time the router
hangs in an endless boot
Am 01.04.2024 um 10:14 schrieb Robert Marko:
On Mon, 1 Apr 2024 at 06:29, e9hack wrote:
Hi,
I'm using a TP-LINK WDR3600 with a bigger flash. Since some time the router
hangs in an endless boot loop. I see the following message:
...
[0.402716] spi-nor spi0.0: BFPT parsing failed. P
Hi,
I'm using a TP-LINK WDR3600 with a bigger flash. Since some time the router
hangs in an endless boot loop. I see the following message:
...
[0.402716] spi-nor spi0.0: BFPT parsing failed. Please consider using
SPI_NOR_SKIP_SFDP when declaring the flash
[0.413217] spi-nor: probe of
Hi,
in the past, it was possible to enable compression in WinSCP. Currently WinSCP
reports an error when the copy operation starts:
Copying file
'D:\Download\carambola\openwrt-ath79-generic-tplink_archer-c7-v2-2-squashfs-sysupgrade-d240224.bin'
fatally failed.
Copying files to remote side fai
Am 21.02.2024 um 01:21 schrieb Daniel Golle:
Yep, I didn't think about empty variables when I built this...
Can you test this please:
https://github.com/openwrt/procd/pull/3
This does fix the issue.
If I test a modified executable, I replaced it by a link to a link on a
automatically mount
Hi,
sysupgrade is broken since
commit 4fa9aaf0bed984d200b3c48d1cc81fca7847c394
base-files: sysupgrade: always setup overlay when creating backup
If /etc/sysupgrade.conf contains files from /var/..., sysugrade does stop with
network down.
If I execute sysupgrade -b /tmp/config-backup.tar.gz, s
Am 20.02.2024 um 14:14 schrieb Paul D:
Could you show an example of this?
I modified /usr/lib/dnsmasq/dhcp-script.sh to see additional variables in the
syslog:
--- dhcp-script.sh.orig 2024-02-14 16:22:53.0 +0100
+++ dhcp-script.sh 2024-02-20 22:55:33.0 +0100
@@ -50,4 +5
Hi,
I face a problem with hotplug calls. To execute hotplug calls, procd
checks given environment variables. If a variable is empty, it is
simply not set by procd. If such a variable is already set by the
shell, the called hotplug script gets a wrong value. This occurs with
dhcp hotplug scripts. O
Hi,
'sh: missing ]' was my fault. I forgot a '&&' in a hot-plug-script:
[ $DEBUG -gt 0 ] logger -t ...
Regards,
Hartmut
Am Mi., 14. Feb. 2024 um 22:29 Uhr schrieb Paul D :
>
> On 2024-02-13 00:23, Hartmut Birr wrote:
> > Hi,
> >
> > I let /etc/init.d/network log some more things by changing:
> >
Hi,
I've trouble with kernel 6.1. My configuration for tagged vlan's with hostapd
works on kernel 5.15 but not on 6.1. Vlan interfaces like ethx.y are not coming
up. This happens on two different routers (Asus RT-AX53u and TP-Link Archer
C7v2). When I try this manually I get:
ip link add link
Am 12.02.2024 um 17:59 schrieb Christian Marangi (Ansuel):
Would be ideal to know what target are we talking about.
The device is a TP Link C7 converted to using DSA.
Regards,
Hartmut
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
h
Hi,
it looks like that this commit
997acc7f86ca985cba52f7ea8b72f0661a1e3c52
generic: 6.1: backport at803x split patches
breaks devices which using a qca8327/qca8337 switch, because the switch driver
is not longer compiled in.
Regards,
Hartmut
___
o
Am 13.01.2024 um 16:47 schrieb Felix Fietkau:
On 13.01.24 16:32, e9hack wrote:
Thanks, this does fix the exception. Now I see the reale error:
Sat Jan 13 15:52:30 2024 daemon.err hostapd: Could not set interface phy1-ap8
flags (UP): Resource busy
Sat Jan 13 15:52:31 2024 daemon.err hostapd
daemon.err hostapd: Interface initialization failed
Is there a limition of AP's per device?
Regards,
Hartmut
Am 13.01.2024 um 16:15 schrieb Felix Fietkau:
Hi,
On 13.01.24 11:28, e9hack wrote:
Hi,
I did add one more AP to my wifi config for testing. This results in hostapd
not starting for this d
Hi,
I did add one more AP to my wifi config for testing. This results in hostapd
not starting for this device:
Thu Jan 11 13:59:12 2024 daemon.notice hostapd: Exception in ubus function:
left-hand side expression is null In __iface_pending_next(), file
/usr/share/hostap/hostapd.uc, line 165,
ld solve the problem. First I did modify /etc/init.d/openvpn by adding an
interface trigger which does restart openvpn with parameter '--local '. Second, I did use the simple way by adding 'option multihome 1' to the
openvpn config file.
Regards,
Hartmut
On 2023-12-15 11:08,
Hi,
I've trouble with openvpn over ipv6. It isn't possible to connect to my router
from outside via ipv6, because openvpn uses the wrong ipv6 address as source. I
get from my provider two prefixes (a 56 and 64 bit). The wan interface gets
assigned a random address from the 64 bit prefix. I'm u
A make distclean did fix the issue.
Regards,
Hartmut
Am 14.12.2023 um 15:19 schrieb Robert Marko:
On Thu, Dec 14, 2023, 15:15 e9hack wrote:
Hi,
compilation of gdb is broken since the update to 14.1. I get the following
error:
expop.h:352:14: error: 'gdb_printf' was not declar
Hi,
compilation of gdb is broken since the update to 14.1. I get the following
error:
expop.h:352:14: error: 'gdb_printf' was not declared in this scope; did you
mean 'gmp_printf'?
352 | gdb_printf (stream, _("%*sVector:\n"), depth, "");
| ~~~^~~
Hi,
since commit 'libubox: update to Git HEAD (2023-11-27)', I've trouble to
compile libubox:
[43/46] Building C object CMakeFiles/jshn.dir/jshn.c.o
[44/46] Linking C executable jshn
FAILED: jshn
: && /data/src/LEDE/RT-AX53U-5.15.x/staging_dir/host/bin/gcc -O2
-I/data/src/LEDE/RT-AX53U-5.15.x/
Too fast. I did reboot with the old version again. The patched version does
work.
Sorry!
Regards,
Hartmut
Am 10.11.2023 um 15:09 schrieb e9hack:
Sorry, but it doesn't solve the issue.
Regards,
Hartmut
Am 10.11.2023 um 14:13 schrieb Felix Fietkau:
I think I found the cause of
Sorry, but it doesn't solve the issue.
Regards,
Hartmut
Am 10.11.2023 um 14:13 schrieb Felix Fietkau:
I think I found the cause of this regression while looking at the code
again. It seems that the hotplug-added devices are removed too early
based on DEV_EVENT_REMOVE events.
Please try this fix
Hi,
I face a strange behaviour since commit
516ab774cc16d4b04b3b17a067cbf2649f1adaeb (system-linux: fix race condition on
bringing up wireless devices). After a reboot or a full restart of hostapd via
'wifi down; sleep 30; killall hostapd; sleep 5; wifi', only the first of 3 5G
AP's is join t
Am 04.08.2023 um 13:01 schrieb Felix Fietkau:
Can you please build hostapd with CONFIG_WPA_MSG_MIN_PRIORITY=0 in the OpenWrt
.config, add -d to the hostapd command in /etc/init.d/wpad
Afterwards, please show me the relevant log part with the full context of the
beacon command, so that I can f
Am 03.08.2023 um 18:51 schrieb Felix Fietkau:
On 03.08.23 15:34, e9hack wrote:
Am 03.08.2023 um 14:35 schrieb Felix Fietkau:
thanks for reporting this. Unfortunately I can't reproduce it myself based on
your description.
Can you please let me know what device you are using, and send m
I've trouble with 5GHz since the last changes related to hostapd. After boot or
after a sequence 'wifi down; sleep 30; wifi' the 2GHz starts only. The 5GHz
doesn't start. It looks like, that ACS isn't started. If I modify a value in
the config related to 5GHz and execute 'wifi reload', sometime
d config_add "{\"iface\":\"$primary_ap\",
\"config\":\"${hostapd_conf_file}\"}")"
ret="$?"
[ "$ret" != 0 -o -z "$hostapd_res" ] && {
wireless_setup_failed HOSTAPD_START_FAI
Hi,
adding '--ipchange "/usr/libexec/openvpn-hotplug ipchange $name"' results in
floating the syslog and /tmp/log/openvpn-udp-server.log with the following message every
5sec:
Sun May 21 09:39:48 2023 daemon.warn openvpn(udp_server_ipv6)[19494]: WARNING:
Compression for sending and receiving
Am 19.05.2023 um 15:00 schrieb e9hack:
Am 19.05.2023 um 13:16 schrieb Daniel Golle:
On Fri, May 19, 2023 at 10:11:39AM +0200, e9hack wrote:
Hi,
I face a strange behaviour. If I compile hostapd with openssl, the Luci web
interface shows both wifis (2.4G+5G) as active and shows connected
Am 19.05.2023 um 13:16 schrieb Daniel Golle:
On Fri, May 19, 2023 at 10:11:39AM +0200, e9hack wrote:
Hi,
I face a strange behaviour. If I compile hostapd with openssl, the Luci web
interface shows both wifis (2.4G+5G) as active and shows connected stations. If I
compile hostapd with wolfssl
Hi,
I face a strange behaviour. If I compile hostapd with openssl, the Luci web
interface shows both wifis (2.4G+5G) as active and shows connected stations. If I
compile hostapd with wolfssl, the Luci web interface shows only the 5G wifi as
active and shows connected stations. The 2.4G wifi is
Hi,
I've trouble with commit:
ecdb24814f540cb67cfa0ca64f32d76889853d15
ramips: add support for SNR-CPE-ME1
The build complains about a missing file mt7621_snr_snr-cpe-me1.dts. There is
added a file mt7621_snr-cpe-me1.dts and it is added the device snr_snr-cpe-me1
to mt7621.mk. One of this lo
Hi,
in the past, it was possible to build packages, which are using crypto libraries like
openssl, wolfssl or mbedtls, in parallel. One was build for the image, selected as
, the others were build as module selected as .
This doesn't work any more, if a package is selected for usage of openssl
Hi,
it looks like there is a bug in ddns-scripts. In dynamic_dns_updater.sh:
70 case "$1" in
71 start)
72 if [ -n "$NETWORK" ]; then
73 start_daemon_for_all_ddns_sections "$NETWORK"
74 exit 0
75 f
Hi,
I'm using hostapd with the radius server compiled in for wpa enterprise. This
does no longer work since the openssl upgrade to 3.0. When a wpa enterprise
client (Windows 10) tries to connect, the following error messages are shown in
the log file:
Wed Mar 8 00:15:05 2023 daemon.notice ho
Hi,
I'm build OpenWrt with additional sub directories in /mnt. /etc/config/fstab
contains an entry, to mount an usb drive to /mnt/1. If I execute 'block
umount', the usb drive will be unmount and the subdirectory 1 in /mnt will be
removed. Removing of the sub directory, is this the expected be
Hi,
backports-6.1-rc8 build fails for ath9k due to a missing dependency:
diff --git a/package/kernel/mac80211/ath.mk b/package/kernel/mac80211/ath.mk
index 9af8c4665d..3931a455b5 100644
--- a/package/kernel/mac80211/ath.mk
+++ b/package/kernel/mac80211/ath.mk
@@ -201,7 +201,7 @@ define KernelPac
Hi,
I could solve the issue by my own. The "option dest lan" is missing in the
blocking rule and the destination port must be 8443.
Regards,
Hartmut
Am 26.11.2022 um 11:47 schrieb e9hack:
Hi,
I do redirect https traffic from wan to a specific ip address in lan with a
diff
Hi,
I do redirect https traffic from wan to a specific ip address in lan with a
different port:
config redirect
option enabled '1'
option name 'wan: Redirect HTTPS for .net:443 to
my-box..lan:8443'
option target 'DNAT'
option src 'wan'
option des
G_PACKAGE_px5g-mbedtls is not set
# CONFIG_PACKAGE_rtty-mbedtls is not set
# CONFIG_PACKAGE_cache-domains-mbedtls is not set
# CONFIG_PACKAGE_mbedtls-util is not set
Regards,
Hartmut
Am 15.11.2022 um 04:17 schrieb Glenn Strauss:
On Mon, Nov 14, 2022 at 08:16:26PM +0100, e9hack wrote:
Hi,
I don&#
Hi,
I don't use mbedtls. Before this three commits
libmbedtls: disable older RSA ciphers
libmbedtls: enable crypto algorithms for hostap
libmbedtls: build option submenu
it did compile something, but no install package was generated. Now compilation
fails:
FAILED: CMakeFiles/mbedtls_test.dir/
Hi,
commit "ae48be8e2157bc7c352b3b6d30c026fafdae4867 / iperf3: add shared libiperf
library and link iperf3 dynamically" is wrong. The install rule for libiperf3
overrides the rule for iperf3. Iperf3 itself will not be installed.
diff --git a/net/iperf3/Makefile b/net/iperf3/Makefile
index db
(/[0-9]\/[0-9]\/[0-9]|0\.0\.0\.0/,"NX",e);sub(/\.$/,"",e);sub(/([0-9]{1,3}\.){3}[0-9]{1,3}/,"OK",e);gsub(/[^[:alnum:]\.-]/,"",e);if(e==""){e="err"};printf
"%s\t%s\t%s\t%s\t%s\n",d,e,a,b,c}' >> "${rep
,
+ #endif
+@@ -243,6 +258,7 @@ static const struct printer printers[] =
#ifdef DLT_VSOCK
{ vsock_if_print, DLT_VSOCK },
#endif
Regards,
Hartmut
Am 05.09.2022 um 09:05 schrieb Alexandru Ardelean:
On Fri, Sep 2, 2022 at 5:35 PM e9hack wrote:
Hi,
it looks like, that tcpdump
Hi,
it looks like, that tcpdump (mini) is broken. It is used by adblock to generate
reports.
tcpdump -nn -p -s0 -i any port 53
version 4.99.1
16:11:26.070312 UNSUPPORTED
0x: 0800 0020 0001 0306 f8e4 e37c ...|
0x0010: 4db3 4500 0047 8910 80
The 'dangling pointer' issue can be fix without using malloc().
--- a/dev.c 2022-05-04 02:18:17.0 +0200
+++ b/dev.c 2022-06-11 08:48:21.185567953 +0200
@@ -206,6 +206,7 @@ void qmi_request_cancel(struct qmi_dev *
int qmi_request_wait(struct qmi_dev *qmi, struct qmi_request *req)
9k driver doesn't have this problem.
Regards,
Hartmut
Am 19.05.2022 um 15:04 schrieb e9hack:
Am 19.05.2022 um 14:07 schrieb Hauke Mehrtens:
On 5/16/22 15:54, e9hack wrote:
Hi,
I've trouble with the following commit:
commit 3aa96efa24c13c6e0aafa5ad826f3f95a3bd74f9
mac80211: Updat
Am 19.05.2022 um 14:07 schrieb Hauke Mehrtens:
On 5/16/22 15:54, e9hack wrote:
Hi,
I've trouble with the following commit:
commit 3aa96efa24c13c6e0aafa5ad826f3f95a3bd74f9
mac80211: Update to version 5.15.33-1
After this commit the 5G wifi interface doesn't start properly. The
Hi,
I've trouble with the following commit:
commit 3aa96efa24c13c6e0aafa5ad826f3f95a3bd74f9
mac80211: Update to version 5.15.33-1
After this commit the 5G wifi interface doesn't start properly. The interfaces are
visible with ifconfig, but it isn't visible on air. To get 5G working, I must
r
Hi,
commit
busybox: fix busybox lock applet pidstr buffer overflow
looks wrong for me:
--- a/package/utils/busybox/patches/220-add_lock_util.patch
+++ b/package/utils/busybox/patches/220-add_lock_util.patch
@@ -109,7 +109,7 @@
+ if (!waitonly) {
+ lseek(fd,
Hi,
it exist the two functions network_get_subnet and network_get_subnet6 in
/lib/functions/network.sh. They return the first ip or ip6 address of a given
interface. In my case:
root@my-openwrt:~# . /lib/functions/network.sh; network_get_subnet subnet "lan"; echo
$subnet; network_get_subnet6
Hi Jo,
I do not understand however how the guest routing works in your network
currently...
Guest network is wifi only with wan access, but without access to the lan
network. It is used for cell phones only, which does synchronize data with
nextcloud via a ddns name over the wan address. Thi
Hi,
I've configured a lan and a guest network on my router. To the lan network is a
linux server
connected with an apache2 running. The apache2 provides nextcloud, gitweb and a
few other
things. Nextcloud and gitweb are reachable from the wan network. I do forward
port 443 from
wan to port 844
Am 11.12.2021 um 08:02 schrieb e9hack:
The easiest way to make the timeout configurable is to add an additional
parameter to the ujail call if the timeout deviates from the default value.
You did it implemented in this way already.
Thanks!
Regards,
Hartmut
Am 10.12.2021 um 15:18 schrieb Daniel Golle:
It'd be nice if you can try the patch attached (to be put in
package/system/procd/patches) and let me know what you think.
Hi Daniel,
the attached patch solves my issue with stubby.
The easiest way to make the timeout configurable is to add an add
Hi,
usually the files for a jailed process must be given via procd_add_jail_mount
or procd_add_jail_mount_rw. It looks like that this isn't necessary for
hostapd. Why not? I can't found this two parameters in '/etc/init.d/wpad'.
Regards,
Hartmut
_
Hi,
I did update the init script for stubby, that it runs with ujail. Stubby does
run, but it isn't possible to stop it via '/etc/init.d/stubby stop'. The ujail
process is stopped, but stubby itself not. It looks like that it isn't possible
to stop stubby with SIGTERM. Stubby will be ended b
Hi,
the scripts are executed. I did a mistake with path names for the logging files.
But the issue with executing dnsmasq twice is still open.
Regards,
Hartmut
Am 05.12.2021 um 12:13 schrieb e9hack+dnsmasq:
Hi,
I did configure a user script by adding:
option dhcpscript '/etc/dn
Hi,
I did configure a user script by adding:
option dhcpscript '/etc/dnsmasq-test.sh'
The script and the main-script are never executed. I did add a line to both
scripts, which shall log to /var/run/dnsmaq/test-{1|2}.log
If I check afterwards if dnsmasq is running, I see two instances. One
Hi,
I'm using two tp-link routers. Both are using the same mac address for one eth
and one wlan interface:
archer c7-v2:
uboot 60:xx:xx:xx:xx:E6
eth060:xx:xx:xx:xx:E7
eth160:xx:xx:xx:xx:E6
wlan0 60:xx:xx:xx:xx:E4 5G
wlan1 60:xx:xx:xx:xx:E6 2.4G
wdr3600:
uboot C0:x
Hi,
after commit "dnsmasq: improve init script", I get the following error in the
log file:
Sun Oct 31 14:08:11 2021 user.err : jail:
creat(/tmp/ujail-pbMGCD/tmp/hosts/dhcp.main) failed: Read-only file system
Sun Oct 31 14:08:11 2021 user.err : jail:
creat(/tmp/ujail-iEpgOj/tmp/hosts/dhcp.gue
Am 27.09.2021 um 19:02 schrieb Felix Fietkau:
Fix pushed, thanks for testing.
- Felix
It fixes my issue too.
In bonding_enable_port() and bridge_enable_member() is in the middle a 'return
-1'. In all error cases before and afterwards is located a 'goto ...' to revert
some things. Is 'retu
Am 27.09.2021 um 14:01 schrieb Felix Fietkau:
Normally it should be active by default. Is CONFIG_KERNEL_ELF_CORE set
in your .config?
It was not activated, but the output from gdb looks not so helpful:
hb@vbox-linux6:~/src/openwrt/LEDE/archer-C7-ath79-5.10.x-dsa/build_dir/target-mips_74kc_musl
Am 27.09.2021 um 12:59 schrieb Felix Fietkau:
Hi,
On 2021-09-26 14:48, e9hack wrote:
Do you see a page fault from netifd in the log? If it does crash, it is
restarted by procd. This does restart the network stack. If I start netifd with
strace, I got this lines immediately before the page
Am 26.09.2021 um 12:54 schrieb Hannu Nyman:
e9hack kirjoitti 26.9.2021 klo 10.02:
Am 24.09.2021 um 22:04 schrieb e9hack:
In the past (a few days ago), it was possible to disable or shut-down wifi by
introduce the command 'wifi down'. This doesn't work currently. After some
s
Am 24.09.2021 um 22:04 schrieb e9hack:
In the past (a few days ago), it was possible to disable or shut-down wifi by
introduce the command 'wifi down'. This doesn't work currently. After some
seconds, wifi is start again.
It may be related to a page fault of netifd. Ne
In the past (a few days ago), it was possible to disable or shut-down wifi by
introduce the command 'wifi down'. This doesn't work currently. After some
seconds, wifi is start again.
Regards,
Hartmut
___
openwrt-devel mailing list
openwrt-devel@lists
Hi,
I didn't select 'make /var persistent' but /var is generated persistent. I
think in the Makefile the test for CONFIG_TARGET_ROOTFS_PERSIST_VAR = n must be
changed to y (or empty).
--- a/package/base-files/Makefile
+++ b/package/base-files/Makefile
@@ -181,12 +181,12 @@ define Package/base-
Hi,
in last update of jail mounts, this part looks wrong:
--- a/package/network/services/dnsmasq/files/dnsmasq.init
+++ b/package/network/services/dnsmasq/files/dnsmasq.init
@@ -10,6 +10,7 @@ ADD_LOCAL_DOMAIN=1
ADD_LOCAL_HOSTNAME=1
ADD_WAN_FQDN=0
ADD_LOCAL_FQDN=""
+EXTRA_MOUNT=""
BASECONFIG
Hi,
I found a few issues in /etc/init.d/dnsmasq
- variable EXTRA_MOUNT must be reset at beginning of dnsmasq_start to avoid to
add the previous content to the following configurations
- /dev/null must be jail mount read/write (see the next too)
- jail mount for /dev/null and /dev/random isn't n
Hi,
I'm using dnsmasq together with ujail. Since some time, I got an error message
in the log:
Fri Jul 30 13:05:10 2021 kern.warn kernel: [ 3149.592061] ext4 filesystem being
remounted at /tmp/ujail-NOnHik/tmp/dhcp.leases supports timestamps until 2038
(0x7fff)
Fri Jul 30 13:05:10 2021 us
Am 19.07.2021 um 16:41 schrieb Ansuel Smith:
The dts has been migrated with a script and we decided to remove the
dtsi that caused some compilation problem.
We still need to take a decision for the device that have dtsi that
declare mtd-mac-address using partition tag declared in user dts
(dtsi u
Am 19.07.2021 um 16:24 schrieb Ansuel Smith:
hi,
some dtsi still use the old implementation as they have to be manually
migrated. Does it cause any problem ?
I don't see a problem. I did check the dtsi files of the two routers which I'm
using. One is migrated and the other one was still missin
Hi,
it looks like, that qca9558_tplink_archer-c.dtsi is missing in commit abc17bf
(ath79: convert mtd-mac-address to nvmem implementation).
Regards,
Hartmut
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mail
Hi,
OpenWrt has been supporting hostapd's internal radius server for a few days.
For several years there has been a line in the init-script that activates the
internal radius server too. I think this is wrong (from hostapd.sh):
[ -n "$wps_possible" -a -n "$config_methods" ] && {
Am 31.05.2021 um 19:01 schrieb Jo-Philipp Wich:
Hi,
This is the reason. Long time ago, I did select the option 'Remove ipkg/opkg
status data files in final images' to reduce the image size. Since such an
option can be selected, LuCI cannot assume, that the file netifd.control exists.
fixed.
Am 31.05.2021 um 16:36 schrieb e9hack:
LuCI commit 17af33e
luci-mod-network: migrate network config depending on netifd version
does introduce to read the file /usr/lib/opkg/info/netifd.control. I don't have
this file on my router. Can that be the reason for the error 'Resource
Am 31.05.2021 um 15:52 schrieb e9hack:
Am 31.05.2021 um 07:18 schrieb Rafał Miłecki:
On 30.05.2021 18:02, e9hack wrote:
Am 30.05.2021 um 15:41 schrieb e9hack:
Am 30.05.2021 um 09:59 schrieb Rafał Miłecki:
On 29.05.2021 23:28, e9hack wrote:
I'm using a TP-Link Archer C7 v2 router. For
Am 31.05.2021 um 07:18 schrieb Rafał Miłecki:
On 30.05.2021 18:02, e9hack wrote:
Am 30.05.2021 um 15:41 schrieb e9hack:
Am 30.05.2021 um 09:59 schrieb Rafał Miłecki:
On 29.05.2021 23:28, e9hack wrote:
I'm using a TP-Link Archer C7 v2 router. For every build, I do update my
sandbox wit
Am 30.05.2021 um 15:41 schrieb e9hack:
Am 30.05.2021 um 09:59 schrieb Rafał Miłecki:
On 29.05.2021 23:28, e9hack wrote:
I'm using a TP-Link Archer C7 v2 router. For every build, I do update my
sandbox with the current OpenWrt repository and the feeds. The first not
working build from
Am 30.05.2021 um 09:59 schrieb Rafał Miłecki:
On 29.05.2021 23:28, e9hack wrote:
I'm using a TP-Link Archer C7 v2 router. For every build, I do update my
sandbox with the current OpenWrt repository and the feeds. The first not
working build from 27.05. shows in Luci:
OpenWrt SNAPSHOT r
Regards,
Hartmut
Am 29.05.2021 um 22:44 schrieb Hauke Mehrtens:
On 5/29/21 10:25 PM, e9hack wrote:
Hi,
it looks like that Luci->Network->Interfaces is broken. It shows a NotFountError (Resource not found) message. My build from 22.05. forces
me to convert something related to network confi
Hi,
it looks like that Luci->Network->Interfaces is broken. It shows a
NotFountError (Resource not found) message. My build from 22.05. forces me to convert
something related to network configuration. Afterwards, this dialogue shows the
interface configuration. Starting with build from 27.05.
Hi,
I've trouble to build libgpg-err since the update from 1.39 to 1.42.
Compilation does fail because the auto generated file gpg-error.h contains
wrong syntax in macro GPGRT_LOCK_INITIALIZER:
#define GPGRT_LOCK_INITIALIZER {1,{{\c
0\c
,\0c
0\c
,\0c
The sequence is generated by gen-lock
Am 16.04.2021 um 08:49 schrieb Hannu Nyman:
e9hack kirjoitti 16.4.2021 klo 8.37:
Hi,
I want like to add the following command to Luci/Custom Commands:
echo "/" > /proc/net/xt_recent/SSH_BLOCK
But I can only add:
echo "> /proc/net/xt_recent/SSH_BLOCK"
How can
Hi,
I want like to add the following command to Luci/Custom Commands:
echo "/" > /proc/net/xt_recent/SSH_BLOCK
But I can only add:
echo "> /proc/net/xt_recent/SSH_BLOCK"
How can I do it?
Regards,
Hartmut
___
openwrt-devel mailing list
openwrt-deve
1 - 100 of 162 matches
Mail list logo
