on
Device/tplink-safeloader-uimage definition
- Merged switch section in network script
(same configuration as tplink,tl-wdr3600
and tplink,tl-wdr4300)
Signed-off-by: Karl-Felix Glatzer
---
.../ath79/base-files/etc/board.d/01_leds | 7 +
.../ath79/base-files/etc/board.
John Crispin wrote:
> Hi,
>
> looks good, nitpicks inline ....
>
> On 23/11/2018 22:00, Karl-Felix Glatzer wrote:
> > This patch adds support for TP-Link Archer A7
> >
> > Specification:
> > - SOC: QCA9563
> > - Flash: 16 MiB (SPI)
> > - RA
On 2018-11-24 10:30:59, Rafał Miłecki wrote:
> On Fri, 23 Nov 2018 at 22:03, Karl-Felix Glatzer wrote:
> > This patch adds support for TP-Link Archer A7
> >
> > Specification:
> > - SOC: QCA9563
> > - Flash: 16 MiB (SPI)
> > - RAM: 128 MiB (DDR2)
>
- Firmware image is now build with dynamic partitioning
- Default to ath10k-ct
Signed-off-by: Karl-Felix Glatzer
---
.../ath79/base-files/etc/board.d/01_leds | 7 +
.../ath79/base-files/etc/board.d/02_network | 4 +
.../etc/hotplug.d/firmware/11-ath10k-caldata |
Hello David,
On 2018-11-17 09:33:07, David Bauer wrote:
> Hello Karl,
>
> On 10.11.18 18:06, Karl-Felix Glatzer wrote:
> > This patch adds support for TP-Link Archer A7
> >
> > Specification:
> > - SOC: QCA9563
> > - Flash: 16 MiB (SPI)
> > - RAM
directory renamed to ArcherC7v5_tp_recovery.bin
2. Connect power cable to Archer A7, press and hold the reset button
and turn the router on
3. Keep the reset button pressed for ~5 seconds
4. Wait ~150 seconds to complete flashing
Signed-off-by: Karl-Felix Glatzer
---
.../ath79/base-files/etc
