pon., 9 gru 2024 o 12:15 Janusz Dziedzic napisał(a):
>
> czw., 26 wrz 2024 o 08:09 Felix Fietkau napisał(a):
> >
> > Hi Harshitha,
> >
> > On 26.09.24 07:14, Harshitha Prem wrote:
> > > Hi Team,
> > >
> > > The MLO interface requires
czw., 26 wrz 2024 o 08:09 Felix Fietkau napisał(a):
>
> Hi Harshitha,
>
> On 26.09.24 07:14, Harshitha Prem wrote:
> > Hi Team,
> >
> > The MLO interface requires support for multi-radio wiphy and we would
> > like to propose the following design for the wireless configuration file
> > to accommod
e writing a linux driver for the propriatery
> (and reverse engineered?) serial protocol to the nuvoton microcontroller?
>
Seems adding realtek backend - simple driver will send data using
ttyS1 should be not complicated.
I see other using I2C but still some hardcoded hex.
> Hence
rapped
> automatically by the mailing list software.
>
>
> -- Forwarded message ------
> From: Evan Jobling
> To: Janusz Dziedzic , OpenWrt Development List
>
> Cc:
> Bcc:
> Date: Mon, 21 Oct 2024 10:42:48 +1100
> Subject: Re: HPE 1920-8G-PoE+ 180W (JG
niedz., 20 paź 2024 o 14:16 Janusz Dziedzic
napisał(a):
>
> Works fine directly after OpenWrt flash (restart without power off/on).
> But after cold boot see this problems.
> Any idea?
>
>
> [ 117.066131] switch: port 7(lan7) entered blocking state
> [ 117.083632] swit
Works fine directly after OpenWrt flash (restart without power off/on).
But after cold boot see this problems.
Any idea?
[ 117.066131] switch: port 7(lan7) entered blocking state
[ 117.083632] switch: port 7(lan7) entered forwarding state
[ 118.469049] rtl83xx_fib_event: FIB_RULE ADD/DEL for I
Hello,
Any idea, is smth like this available?
BR
Janusz
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Hello,
Using 23.05 and SAE (SAE only mode) where MFP required.
Send req_beacon using hostapd_cli to client.
Don't see problem for regular (3addr mode) stations.
Only see this when 4addr mode station used.
>From airlogs seems mt76 send this frame without protection, so client
simple skip this fra
wt., 30 lip 2024 o 12:47 Paul Spooren napisał(a):
>
> Sure, https://github.com/cyyself/wg-bench/pull/37
>
> > On 29. Jul 2024, at 19:37, Paul D wrote:
> >
> >
> > Hi, could one of the early ONE owners/users post numbers for the ONE
> > regarding WireGuard performance?
> >
> > https://forum.openw
śr., 21 sie 2024 o 10:21 Janusz Dziedzic napisał(a):
>
> wt., 20 sie 2024 o 15:50 Janusz Dziedzic
> napisał(a):
> >
> > wt., 20 sie 2024 o 15:23 Janusz Dziedzic
> > napisał(a):
> > >
> > > Hello,
> > >
> > > Any hints about BE14
wt., 20 sie 2024 o 15:50 Janusz Dziedzic napisał(a):
>
> wt., 20 sie 2024 o 15:23 Janusz Dziedzic
> napisał(a):
> >
> > Hello,
> >
> > Any hints about BE14 NIC - what should I enable in config. Does it work?
> > Have latest main and seems no pci output w
wt., 20 sie 2024 o 15:23 Janusz Dziedzic napisał(a):
>
> Hello,
>
> Any hints about BE14 NIC - what should I enable in config. Does it work?
> Have latest main and seems no pci output with BE14 inside BPI-R4.
>
Sorry for the noise.
SW4 - on - after that module power on:
roo
Hello,
Any hints about BE14 NIC - what should I enable in config. Does it work?
Have latest main and seems no pci output with BE14 inside BPI-R4.
BR
Janusz
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailma
śr., 17 lip 2024 o 17:50 Schmid, Florian
napisał(a):
>
> Hi,
> i have only recently started working with OpenWrt. I think the project of an
> own hardware platform is great. I don't know how far the development has
> progressed. However, I am missing a very important interface in the hardware
>
pon., 24 cze 2024 o 19:45 Janusz Dziedzic
napisał(a):
>
> pon., 24 cze 2024 o 14:38 Felix Fietkau napisał(a):
> >
> > On 24.06.24 13:46, Janusz Dziedzic wrote:
> > > pt., 21 cze 2024 o 12:59 Felix Fietkau napisał(a):
> > >>
> > >> On 21
pon., 24 cze 2024 o 14:38 Felix Fietkau napisał(a):
>
> On 24.06.24 13:46, Janusz Dziedzic wrote:
> > pt., 21 cze 2024 o 12:59 Felix Fietkau napisał(a):
> >>
> >> On 21.06.24 10:55, Janusz Dziedzic wrote:
> >> > Hello,
> >> > I see we have
pt., 21 cze 2024 o 12:59 Felix Fietkau napisał(a):
>
> On 21.06.24 10:55, Janusz Dziedzic wrote:
> > Hello,
> > I see we have backports older than kernel on main (6.6.15 vs 6.6.32)?
> > Is there plan to kick backports to smth like 6.10?
>
> I have 6.9.1 in my sta
Hello,
I see we have backports older than kernel on main (6.6.15 vs 6.6.32)?
Is there plan to kick backports to smth like 6.10?
BR
Janusz
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-d
sob., 3 lut 2024 o 13:08 Hauke Mehrtens napisał(a):
>
> Hi,
>
> I track the status of the Linux kernel 6.1 migration in this github
> issue: https://github.com/openwrt/openwrt/issues/14546
>
> There are still many targets on kernel 5.15 without testing support for
> kernel 6.1 in OpenWrt master. I
Signed-off-by: Janusz Dziedzic
---
package/firmware/linux-firmware/intel.mk | 8
1 file changed, 8 insertions(+)
diff --git a/package/firmware/linux-firmware/intel.mk
b/package/firmware/linux-firmware/intel.mk
index 27b0d8ce64..19a96b2c85 100644
--- a/package/firmware/linux-firmware
Signed-off-by: Janusz Dziedzic
---
package/kernel/mac80211/Makefile | 2 ++
package/kernel/mac80211/ath.mk| 22 +--
...2k-fix-compilation-with-older-kernel.patch | 28 +++
3 files changed, 50 insertions(+), 2 deletions(-)
create mode
Signed-off-by: Janusz Dziedzic
---
package/kernel/mac80211/ath.mk | 22 +++---
1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/package/kernel/mac80211/ath.mk b/package/kernel/mac80211/ath.mk
index beb1b2ae4f..b66049b18a 100644
--- a/package/kernel/mac80211/ath.mk
Sorry for the noise, it was physical connection issue. Now I see it
works correctly:
[8.360566] mhi mhi0: Wait for device to enter SBL or Mission mode
[8.475137] kmodloader: done loading kernel modules from /etc/modules.d/*
[8.482058] ath11k_pci :01:00.0: chip_id 0x0 chip_family 0x
Hello,
Any idea what is wrong?
[7.574630] NET: Registered PF_PPPOX protocol family
[7.588974] ath11k_pci :01:00.0: assign IRQ: got 0
[7.594475] ath11k_pci :01:00.0: BAR 0: assigned [mem
0x2000-0x20ff 64bit]
[7.602644] ath11k_pci :01:00.0: enabling device ( -
śr., 17 sty 2024 o 18:15 Daniel Golle napisał(a):
>
> On Wed, Jan 17, 2024 at 05:47:26PM +0100, John Crispin wrote:
> >
> > On 17.01.24 17:46, Janusz Dziedzic wrote:
> > > Do you think I can use m.2 A->M converter here and use wifi mt7916 A+E
> > >
esn't this draw attention away from properly supporting existing
> devices?
> A: The OpenWrt One project is a privately led initiative by a few
> enthusiasts, there is no intent to change the focus of the OpenWrt
> project in any way.
>
>
> ___
> openwrt-devel mailing list
>
Hello,
See this:
[986954.422624] ieee80211 phy0: WA: free done event
[986954.422624] 10225940
[986954.422624] len = 36
[986954.422624] DW0 : 24 00 06 30
[986954.422624] DW1 : 03 e0 34 4f
[986954.422624] DW2 : 00 40 01 89
[986954.422624] DW3 : 06 50 00 41
[986954.422624] DW4 : 3c 80 1e 00
[986954.4
sob., 13 sty 2024 o 11:37 e9hack napisał(a):
>
> Hi,
>
> I did add one more AP to my wifi config for testing. This results in hostapd
> not starting for this device:
>
> Thu Jan 11 13:59:12 2024 daemon.notice hostapd: Exception in ubus function:
> left-hand side expression is null In __iface_pen
wt., 9 sty 2024 o 18:59 Daniel Golle napisał(a):
>
> On Tue, Jan 09, 2024 at 06:49:04PM +0100, Janusz Dziedzic wrote:
> > wt., 9 sty 2024 o 18:02 Robert Marko napisał(a):
> > >
> > > On Tue, 9 Jan 2024 at 17:53, Rafał Miłecki wrote:
> > > >
>
wt., 9 sty 2024 o 18:02 Robert Marko napisał(a):
>
> On Tue, 9 Jan 2024 at 17:53, Rafał Miłecki wrote:
> >
> > On 9.01.2024 13:29, John Crispin wrote:
> > > On 09.01.24 12:56, Robert Marko wrote:
> > >> ---SNIP---
> > >>
> > >>> Why not 6GHz?
> > >> 6GHz requires an external card, and I doubt you
wt., 9 sty 2024 o 13:21 Daniel Golle napisał(a):
>
> On Tue, Jan 09, 2024 at 12:56:55PM +0100, Robert Marko wrote:
> > ---SNIP---
> >
> > > Why not 6GHz?
> >
> > 6GHz requires an external card, and I doubt you can fit that in the
> > target price.
>
> Afaik we could use MT7976A as DBDC front-end s
wt., 9 sty 2024 o 11:54 John Crispin napisał(a):
>
> tl;dr
>
> In 2024 the OpenWrt project turns 20 years! Let's celebrate this
> anniversary by launching our own first and fully upstream supported
> hardware design.
>
> If the community likes the idea outlined below in greater details, we
> would
Hello,
Do you have some ideas how UCI wifi config should look like for MLO config.
In such case we could see smth like:
root@test:/# iw dev
phy#0
Interface wlan0
ifindex 21
wdev 0x5
addr 00:03:7f:12:19:19
ssid TEST-MLO
type AP
link 0:
pt., 23 gru 2022 o 17:51 Michael Richardson napisał(a):
>
>
> > Finally buy: D-LINK DGS-1210-48 G1.
>
Also
- HP 1920-24G JG924A
works correctly.
But what about future? Is there any new device we can buy and use openwrt there?
Or even 2.5Gbps/5Gbps?
So far just buy used/older devices.
> Is thi
czw., 5 sty 2023 o 20:24 Janusz Dziedzic napisał(a):
>
> czw., 5 sty 2023 o 16:41 Janusz Dziedzic
> napisał(a):
> >
> > Hello,
> >
> > Have two mt7915e cards in my banana PI R64 (latest master).
> > After do ifconfig wlan1 up - dump.
>
czw., 5 sty 2023 o 16:41 Janusz Dziedzic napisał(a):
>
> Hello,
>
> Have two mt7915e cards in my banana PI R64 (latest master).
> After do ifconfig wlan1 up - dump.
> While ifconfig wlan2 up works correctly.
>
> [7.093206] mt7915e :01:00.0: assign IRQ: got 148
Hello,
Have two mt7915e cards in my banana PI R64 (latest master).
After do ifconfig wlan1 up - dump.
While ifconfig wlan2 up works correctly.
[7.093206] mt7915e :01:00.0: assign IRQ: got 148
[7.098405] mt7915e :01:00.0: enabling device ( -> 0002)
[7.104537] mt7915e :0
czw., 22 gru 2022 o 18:26 Jan Hoffmann napisał(a):
>
> Hi Janusz,
>
> > BTW, this switch have some issues with IPv6?
> >
> > Simple remove lan2 from switch/bridge and configure manually - connect
> > my device directly to eth2 port.
> > Seems IPv4 works correctly - while IPv6 not (ping6 ff02::1%la
czw., 22 gru 2022 o 02:24 Luiz Angelo Daros de Luca
napisał(a):
>
> > Thanks all!
> > Finally buy: D-LINK DGS-1210-48 G1.
> >
> > U-Boot 2011.12.(2.1.5.67086)-Candidate1 (Apr 13 2017 - 13:58:11)
> >
> > Board: RTL839x CPU:700MHz LXB:200MHz MEM:400MHz
> > DRAM: 128 MB
> > SPI-F: 1x32 MB
> >
> > Ne
śr., 14 gru 2022 o 20:35 Jan Hoffmann napisał(a):
>
> > Hi Janusz,
> >
> > > Could I just buy (any experience):
> > >
> > > HP switch 1920-24G JG924A
> > > Do I need to check any HW ver? Or any JG924A should work?
> >
> > The devices from HPE 1920 series with model numbers JG92xA are all
> > R
śr., 14 gru 2022 o 12:59 Janusz Dziedzic napisał(a):
>
> wt., 13 gru 2022 o 14:20 Daniel Golle napisał(a):
> >
> > On Tue, Dec 13, 2022 at 11:17:49AM +0100, Janusz Dziedzic wrote:
> > > Hello,
> > >
> > > Do you know any/some ethernet switch project
wt., 13 gru 2022 o 14:20 Daniel Golle napisał(a):
>
> On Tue, Dec 13, 2022 at 11:17:49AM +0100, Janusz Dziedzic wrote:
> > Hello,
> >
> > Do you know any/some ethernet switch project (best 18+ gbps ports)
> > that using linux/openwrt and DSA architecture?
>
>
Hello,
Do you know any/some ethernet switch project (best 18+ gbps ports)
that using linux/openwrt and DSA architecture?
BR
Janusz
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
pt., 9 wrz 2022 o 12:30 Andrey Jr. Melnikov napisał(a):
>
> Janusz Dziedzic wrote:
> > [-- text/plain, encoding quoted-printable, charset: UTF-8, 86 lines --]
>
> > pt., 9 wrz 2022 o 04:32 LiXiong Liu napisał(a):
> > >
> > > ### swcon
pt., 9 wrz 2022 o 04:32 LiXiong Liu napisał(a):
>
> ### swconfig & DSA VLAN Configuration Comparison
> Doesn't just support Tunnk on lan5,
> also need access to 192.168.1.1
> so must setting untagged at br-lan
>
> #switch-vlan
> config switch
> option name 'switch0'
> option reset
niedz., 19 gru 2021 o 14:39 Bastian Bittorf napisał(a):
>
> On Sat, Dec 18, 2021 at 01:21:21PM +0100, Janusz Dziedzic wrote:
> > Hello,
> >
> > Have mt7915e in my mt7621 router (pandora box/ramips).
>
> the same here with 'TP-LINK Archer C6U' (also ra
Hello,
Have mt7915e in my mt7621 router (pandora box/ramips).
After fresh start (disconnect/connect power supply) works correctly.
After reboot seems to always fail with:
Sat Dec 18 08:43:58 2021 kern.info kernel: [ 14.552269] mt7621-pci
1e14.pcie: bus=3 slot=2 irq=25
Sat Dec 18 08:43:58 202
Hello,
I see that my board negotiate only 100mbps on wan iface.
First think cable or switch issue - but using same cable and
same ext switch port I get 1000 when using lanX iface.
Do you see the same - or my board have some issue with WAN?
Fresh master used.
root@OpenWrt:~# ethtool wan
Settings
niedz., 24 paź 2021 o 21:42 Janusz Dziedzic
napisał(a):
>
> We need this when build ath11k from backports.
>
> Signed-off-by: Janusz Dziedzic
> ---
> .../generic/pending-5.10/930-qcom-qmi-helpers.patch | 13 +
> 1 file changed, 13 insertions(+)
> create mod
niedz., 24 paź 2021 o 21:55 Robert Marko napisał(a):
>
> On Sun, 24 Oct 2021 at 21:43, Janusz Dziedzic
> wrote:
> >
> > When build ath11k from backports we need enable
> > such packages:
> > - mhi-bus
> > - qrtr
> > - qrtr-mhi
> > - michae
niedz., 24 paź 2021 o 22:04 Robert Marko napisał(a):
>
> On Sun, 24 Oct 2021 at 21:43, Janusz Dziedzic
> wrote:
> >
> > Signed-off-by: Janusz Dziedzic
> > ---
> > package/kernel/mac80211/ath.mk | 26 --
> > 1 file changed, 24 ins
We need this when build ath11k from backports.
Signed-off-by: Janusz Dziedzic
---
.../generic/pending-5.10/930-qcom-qmi-helpers.patch | 13 +
1 file changed, 13 insertions(+)
create mode 100644 target/linux/generic/pending-5.10/930-qcom-qmi-helpers.patch
diff --git a/target/linux
Signed-off-by: Janusz Dziedzic
---
package/kernel/mac80211/ath.mk | 26 --
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/package/kernel/mac80211/ath.mk b/package/kernel/mac80211/ath.mk
index ba03ae11a6..634fb13195 100644
--- a/package/kernel/mac80211
When build ath11k from backports we need enable
such packages:
- mhi-bus
- qrtr
- qrtr-mhi
- michael-mic
- qcom-qmi-helpers
Signed-off-by: Janusz Dziedzic
---
package/kernel/linux/modules/lib.mk | 14
package/kernel/linux/modules/mhi.mk | 21 +++
package/kernel/linux
czw., 21 paź 2021 o 23:00 Robert Marko napisał(a):
>
> On Thu, 21 Oct 2021 at 22:54, Hauke Mehrtens wrote:
> >
> > On 10/21/21 6:52 PM, Robert Marko wrote:
> > > On Thu, 21 Oct 2021 at 18:30, Janusz Dziedzic
> > > wrote:
> > >>
> >
czw., 21 paź 2021 o 17:54 Robert Marko napisał(a):
>
> For PCI/USB bus level support there are per target feature flags that are set
> and then you can check if those are set so that you cant even select usb wlan
> driver if the target doesnt even have usb support enabled.
>
OK I see. Seems I ca
czw., 21 paź 2021 o 16:54 Robert Marko napisał(a):
>
> On Thu, 21 Oct 2021 at 16:53, Janusz Dziedzic
> wrote:
> >
> > czw., 21 paź 2021 o 16:43 Robert Marko napisał(a):
> > >
> > > On Thu, 21 Oct 2021 at 16:40, Janusz Dziedzic
> > > wrote:
czw., 21 paź 2021 o 16:43 Robert Marko napisał(a):
>
> On Thu, 21 Oct 2021 at 16:40, Janusz Dziedzic
> wrote:
> >
> > Hello,
> >
> > Hit some issue with my ath11k card, so maybe someone already fix
> > it/know what I missed?
> >
> > My card
Hello,
Hit some issue with my ath11k card, so maybe someone already fix
it/know what I missed?
My card (pcie):
root@OpenWrt:~# lspci
:00:00.0 PCI bridge: MEDIATEK Corp. Device 3258
:01:00.0 Unassigned class [ff00]: Qualcomm QCA6390 Wireless
Network Adapter [AX500-DBS (2x2)]
I have this
ernel/mac80211/patches/subsys/382-mac80211-Switch-to-a-virtual-time-based-airtime-sche.patch
> delete mode 100644
> package/kernel/mac80211/patches/subsys/384-nl80211-add-common-API-to-configure-SAR-power-limita.patch
> delete mode 100644
> package/kernel/mac80211/patches/subsys/385-mac802
should compile kernel with profiling enabled,
debug information, symbol table information.
Signed-off-by: Janusz Dziedzic
---
Code is from http://sysprof.com
patches from openembedded
devel/sysprof/Makefile | 44
devel/sysprof/patches/define
61 matches
Mail list logo
