Hi Ansuel,
this makes a lot of sense imho.
~ Jo
signature.asc
Description: OpenPGP digital signature
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Hauke Mehrtens writes:
> On 2/27/23 13:38, Bjørn Mork wrote:
>> Several devices depend on fw_printenv during sysupgrade. Make sure
>> it always is present in all images, including initramfs images built
>> by the buildbots.
>> Fixes: 2449a632084b ("ramips: mt7621: Add support for ZyXEL NR7101")
The Linux gpio-keys driver bindings allow for GPIO attached or interrupt
attached keys. Currently if an interrupt attached key is encountered
gpio_keys_button_probe() will fail due to not being able to get a gpio
descriptor:
gpio-keys: probe of gpio-keys failed with error -2
Skip the failure in th
Add package for Maxim MAX6642 i2c based temperature sensor.
Signed-off-by: Tim Harvey
---
package/kernel/linux/modules/hwmon.mk | 15 +++
1 file changed, 15 insertions(+)
diff --git a/package/kernel/linux/modules/hwmon.mk
b/package/kernel/linux/modules/hwmon.mk
index 79df0471ed51..
Fix hwmon-gsc driver by replacing out-of-tree hwmon-gsc driver with in-tree
driver that was merged in Linux v5.8:
- remove the old out-of-tree module
- add configuration for the in-tree modules
Signed-off-by: Tim Harvey
---
v2:
- build both CONFIG_MFD_GATEWORKS_GSC and CONFIG_SENSORS_GSC as ke
On Sun, Feb 26, 2023 at 9:24 AM Hauke Mehrtens wrote:
>
> On 2/18/23 01:24, Tim Harvey wrote:
> > The Gateworks GSC drivers were merged in Linux v5.8:
> > - remove the old out-of-tree module
> > - add configuration for the in-tree modules
> >
> > Signed-off-by: Tim Harvey
> > ---
> > package/ke
On 2/27/23 17:23, Hauke Mehrtens wrote:
Build firmware images for Ralink MT7621 based boards.
This will add uboot-envtools to all devices. uboot-envtools is not included in
all DEVICE_PACKAGES now, should we explicitly remove it from device definitions
which do not had it before?
The D
Hi,
there is an idea of moving board-2 blob to a separate repo.
It seems ath10k chance of getting board-2 blob merged upstream is becoming
almost impossible. Result is that the board-2 blob number is growing and some
are complaining that these are bloating openwrt repo.
As said in the intro, ther
On 2/27/23 13:38, Bjørn Mork wrote:
Several devices depend on fw_printenv during sysupgrade. Make sure
it always is present in all images, including initramfs images built
by the buildbots.
Fixes: 2449a632084b ("ramips: mt7621: Add support for ZyXEL NR7101")
Signed-off-by: Bjørn Mork
---
Chang
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
On Monday, February 27th, 2023 at
Hi all,
We see that the DHCP leasetime can be configured either in days or hours or
minutes etc. as below:
dhcp.@dhcp[0].leasetime='12h'
Query:
If we don't specify the letter i.e., d, h, or m and just specify the number (as
below), then how does dnsmasq interpret the leasetime?
dhcp.@dhcp[0]
Thank you Imre for bringing this up again. I have also notified the author of
that RFC (Peter Sherman, @psherman on the forums) that this discussion is going
on so he can offer opinions. You can read the RFC at:
https://forum.openwrt.org/t/rfc-automatic-lan-subnet-reassignment-upon-conflict-with
Hi Rich,
Basic (v4 only) version of these (as well automatic wan proto detection) was
implemented and rejected some years ago :)
Both are quite easy to do, that version used the following hotplug script:
===
#!/bin/sh
if [ "$INTERFACE" = "wan" ] && [ "$ACTION" = "ifup" ]
then
# Get sub
Several devices depend on fw_printenv during sysupgrade. Make sure
it always is present in all images, including initramfs images built
by the buildbots.
Fixes: 2449a632084b ("ramips: mt7621: Add support for ZyXEL NR7101")
Signed-off-by: Bjørn Mork
---
Changes since v1:
- rebased onto current m
14 matches
Mail list logo
