Hi Henrik,
On Wed, Dec 01, 2021 at 01:46:01AM +0100, Henrik Ginstmark wrote:
> Hi
>
> Is it possible to add dms_get_operating_mode command?
Doesn't seem much of a stretch, so why not ;)
> Then it would be possible to verify if the modem is in flight mode or not.
>
> Or how can I contribute to
Hi
Is it possible to add dms_get_operating_mode command?
Then it would be possible to verify if the modem is in flight mode or not.
Or how can I contribute to uqmi?
BR
Henrik Ginstmark
---
commands-dms.c
@@ -375,6 +375,38 @@ qmi_set_dms_reset_request(msg);
return QMI_CMD_REQUEST;
}
+static v
Am Montag, 29. November 2021, 10:57:37 CET schrieb Rui Salvaterra:
> Hi, Sven,
>
> On Sun, 28 Nov 2021 at 01:40, Sven Roederer wrote:
> > Rui, not sure if to call it a bug. At the end there is a hardcoded default
> > algo in the module, that is used initially when creating the device. The
> > che
When initializing the ZRAM it has a hardcoded default of "lzo-rle" compressor.
This
compressor is not available in OpenWrt as only "lzo" is provided. The current
behaviour make the PROCD_ZRAM_TMPFS feature failing, as procd-init is relying on
the kernels default-algo, which is not present. So sett
Hi Rafał,
On 30.11.2021 14:00, Rafał Miłecki wrote:
From: Rafał Miłecki
Those tools can be useful for targets that use ITB firmware format. They
may need them to extract firmware images to flash them.
Truly a cosmetic thing but all other U-Boot related packages we
currently carry in the tre
Attached in the form of patch for openwrt-21.02 current HEAD,
please can this be applied =)
We have tested 21.02 build on the AC2350 all we can:-
* 2.4ghz wifi
* 5ghz wifi
* Ethernet Switch config, matches up with physical labels
* Reset button works
* LEDs (2 different 2 colour LEDs) work exac
Hello,
I have some comments below.
On 30/11/2021 17:06, Catrinel Catrinescu wrote:
Add the Embedded Wireless "Balin" platform, it is in ar71xx too
SoC: QCA AR9344 or AR9350
RAM: DDR2-RAM 64MBytes
Flash: SPI-NOR 16MBytes
WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n
Ethernet: 3 x 10/
Add the Embedded Wireless "Balin" platform, it is in ar71xx too
SoC: QCA AR9344 or AR9350
RAM: DDR2-RAM 64MBytes
Flash: SPI-NOR 16MBytes
WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n
Ethernet: 3 x 10/100 Mb/s
USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up
PCI-Express: 1 x lane PCIe
From: Rafał Miłecki
Those tools can be useful for targets that use ITB firmware format. They
may need them to extract firmware images to flash them.
Signed-off-by: Rafał Miłecki
---
package/boot/u-boot-tools/Makefile| 50 +++
.../patches/0001-tools-disable-kwbimage.
Panasonic Switch-M8eG PN28080K is a 8 + 1 port gigabit switch, based on
RTL8380M.
Specification:
- SoC : Realtek RTL8380M
- RAM : DDR3 128 MiB (Winbond W631GG8KB-15)
- Flash : SPI-NOR 32 MiB (Macronix MX25L25635FMI-10G)
- Ethernet : 10/100/1000 Mbps x8 + 1
- por
This is a continuation of the PR in GitHub[1] and v1 patch series.
This patch series adds support for Panasonic Switch-M8eG PN28080K.
Panasonic Switch-M*eG PN28xx0K series has the following models:
- Switch-M8eG PN28080K (RTL8380M, 8 + 1 SFP)
- 1-9 : RTL8380M (SoC)
- Switch-M16eG PN28160K (RT
The system status LED on Panasonic Switch-M8eG PN28080K is connected to
a PCA9539PW. To use the LED as a status LED of OpenWrt while booting,
enable the pca953x driver and built-in to the kernel.
Also enable CONFIG_GPIO_PCA953X_IRQ to use interrupt via RTL83xx GPIO.
Signed-off-by: INAGAKI Hiroshi
Thank you very much.
I am looking forward to the next release of OpenWRT!
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
13 matches
Mail list logo
