Responses…
> On Dec 17, 2020, at 1:56 AM, Bjørn Mork wrote:
>
> Philip Prindeville writes:
>
>> https://github.com/openwrt/packages/pull/14240
>>
>> The previous one is a precursor for getting Bind to start before DHCPD.
>
>
> That makes more sense yes.
>
> I looked at it briefly. A coupl
Signed-off-by: Rosen Penev
---
tools/libressl/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/libressl/Makefile b/tools/libressl/Makefile
index 0cc26a930c..dbd8ca4d1a 100644
--- a/tools/libressl/Makefile
+++ b/tools/libressl/Makefile
@@ -8,8 +8,8 @@
include
Massive speed boost.
From:
Executed in 23.78 secs fish external
usr time 31.03 secs0.00 micros 31.03 secs
sys time 15.96 secs 624.00 micros 15.96 secs
To:
Executed in9.64 secs fish external
usr time 10.03 secs 571.00 micros 10.03 secs
> On Thu, Dec 17, 2020 at 5:15 PM wrote:
> >
> > > On Thu, Dec 17, 2020 at 4:13 PM wrote:
> > > >
> > > >
> > > >
> > > > > -Messaggio originale-
> > > > > Da: Ansuel Smith
> > > > > Inviato: venerdì 18 dicembre 2020 00:59
> > > > > A: OpenWrt Development List
> > > > > Cc: Ansuel Smith
On Thu, Dec 17, 2020 at 5:15 PM wrote:
>
> > On Thu, Dec 17, 2020 at 4:13 PM wrote:
> > >
> > >
> > >
> > > > -Messaggio originale-
> > > > Da: Ansuel Smith
> > > > Inviato: venerdì 18 dicembre 2020 00:59
> > > > A: OpenWrt Development List
> > > > Cc: Ansuel Smith
> > > > Oggetto: [PA
> On Thu, Dec 17, 2020 at 4:13 PM wrote:
> >
> >
> >
> > > -Messaggio originale-
> > > Da: Ansuel Smith
> > > Inviato: venerdì 18 dicembre 2020 00:59
> > > A: OpenWrt Development List
> > > Cc: Ansuel Smith
> > > Oggetto: [PATCH] tools: zlib: fix broken compile with ccache enabled
> > >
It seems to cause issues with zlib.
This matches behavior with other tools in the tools/ directory.
Signed-off-by: Rosen Penev
---
tools/zlib/Makefile | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/zlib/Makefile b/tools/zlib/Makefile
index 279851f758..bb7c15cce7 1
On Thu, Dec 17, 2020 at 4:13 PM wrote:
>
>
>
> > -Messaggio originale-
> > Da: Ansuel Smith
> > Inviato: venerdì 18 dicembre 2020 00:59
> > A: OpenWrt Development List
> > Cc: Ansuel Smith
> > Oggetto: [PATCH] tools: zlib: fix broken compile with ccache enabled
> >
> > If ccache is enab
> -Messaggio originale-
> Da: Ansuel Smith
> Inviato: venerdì 18 dicembre 2020 00:59
> A: OpenWrt Development List
> Cc: Ansuel Smith
> Oggetto: [PATCH] tools: zlib: fix broken compile with ccache enabled
>
> If ccache is enabled with an empty buildroot the compilation fails. Fix
> t
If ccache is enabled with an empty buildroot the compilation fails. Fix
this by using the NOCACHE compiler as it's done by other tools package.
Signed-off-by: Ansuel Smith
---
tools/zlib/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/zlib/Makefile b/tools/zlib/Makefile
index
Commit e401a2a42e6d7c892e1cf7d765fa5ec9b2db3fb3 causes my Turris Omnia
CZ11NIC13 to no longer boot. Compiling with EARLY_PRINTK does not show
anything of interest:
## Executing script at 0180
Setting bus to 0
reading armada-385-turris-omnia.dtb
18748 bytes read in 20 ms (915 KiB/s)
reading
On Thu, Dec 17, 2020 at 3:09 PM wrote:
>
> > On Thu, Dec 17, 2020 at 3:05 PM Ansuel Smith wrote:
> > >
> > > >
> > > > On Thu, Dec 17, 2020 at 1:57 PM Ansuel Smith
> > wrote:
> > > > >
> > > > > Hello I can't currently compile openwrt on my system.
> > > > > The error is this
> > > > > https://g
> On Thu, Dec 17, 2020 at 3:05 PM Ansuel Smith wrote:
> >
> > >
> > > On Thu, Dec 17, 2020 at 1:57 PM Ansuel Smith
> wrote:
> > > >
> > > > Hello I can't currently compile openwrt on my system.
> > > > The error is this
> > > > https://gist.github.com/Ansuel/b5a6574ea912d56e8697984154d0ba42
> > >
On Thu, Dec 17, 2020 at 3:05 PM Ansuel Smith wrote:
>
> >
> > On Thu, Dec 17, 2020 at 1:57 PM Ansuel Smith wrote:
> > >
> > > Hello I can't currently compile openwrt on my system.
> > > The error is this
> > > https://gist.github.com/Ansuel/b5a6574ea912d56e8697984154d0ba42
> > >
> > > Any idea wh
>
> On Thu, Dec 17, 2020 at 1:57 PM Ansuel Smith wrote:
> >
> > Hello I can't currently compile openwrt on my system.
> > The error is this
> > https://gist.github.com/Ansuel/b5a6574ea912d56e8697984154d0ba42
> >
> > Any idea why ? I have a very recent system with latest package (ubuntu
> > devel b
On Thu, Dec 17, 2020 at 1:57 PM Ansuel Smith wrote:
>
> Hello I can't currently compile openwrt on my system.
> The error is this
> https://gist.github.com/Ansuel/b5a6574ea912d56e8697984154d0ba42
>
> Any idea why ? I have a very recent system with latest package (ubuntu
> devel branch)
Because you
Hello I can't currently compile openwrt on my system.
The error is this
https://gist.github.com/Ansuel/b5a6574ea912d56e8697984154d0ba42
Any idea why ? I have a very recent system with latest package (ubuntu
devel branch)
___
openwrt-devel mailing list
o
AirTight Networks (later renamed to Mojo Networks) C-75 is a dual-band
access point, also sold by WatchGuard under name AP320.
Specification
SoC: Qualcomm Atheros QCA9550
RAM: 128 MiB DDR2
Flash: 2x 16 MiB SPI NOR
WIFI: 2.4 GHz 3T3R integrated
5 GHz 3T3R QCA9890 oversized Mini PCIe card
Ethe
The flash capacity is divided in two flash chips and currently only
first is used. Increase available space for OpenWrt by additional 16 MiB
using mtd-concat driver. Because U-Boot might not be able to load kernel
image spanned through two flash chips, the size of kernel is limited
to space availab
W dniu 16.12.2020 o 16:49, Adrian Schmutzler pisze:
> Hi again,
>
> one comment and a slightly conceptual question:
>
>> -Original Message-
>> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org]
>> On Behalf Of Tomasz Maciej Nowak
>> Sent: Dienstag, 15. Dezember 2020 18:1
MIPS 32 bit support for sanitizer was added with GCC 9, MIPS 64 bit and
ARC is still not supported in GCC 10.
Deactivate them for now and change this when we change the default
compiler to GCC 9 or later.
Signed-off-by: Hauke Mehrtens
---
package/libs/toolchain/Makefile | 8
1 file cha
The mt76 test tools did not compile against glibc.
Signed-off-by: Hauke Mehrtens
---
...et-mode-for-new-file-tmp-mt76-test-s.patch | 25 +++
1 file changed, 25 insertions(+)
create mode 100644
package/kernel/mt76/patches/100-tools-Set-mode-for-new-file-tmp-mt76-test-s.patch
di
Florian Eckert [2020-12-17 10:34:25]:
> So that I do not always have to type the whole string.
Well, you don't need to.
root@OpenWrt:/# cat ~/.shinit
procd_service_list() {
ubus call service list "{'name':\"$1\",'verbose':true}"
}
root@OpenWrt:/# procd_service_list urngd
{
"urn
This patchset adds the new method "restart" to the ubus service object.
This method is called on a service restart, if it is managed by procd.
I have noticed that during a firewall restart the mwan3 rules have all
disappeared and I have to restart my service as well. I did not expected
this. So th
This commit adds the functions `procd_add_service_trigger` and
`procd_add_restart_service_trigger`. In order for the service to be
triggered by another service during a restart, only the function
procd_add_restart_service_trigger is needed.
Example:
service_trigger() {
procd add_restart_s
Thies commit add the new wrapper function to rc.common to execute the new ubus
service method "restart" on a service restart.
Signed-off-by: Florian Eckert
---
package/base-files/files/etc/rc.common | 13 +
1 file changed, 13 insertions(+)
diff --git a/package/base-files/files/etc/r
To allow other services to respsond to a restart event from a procd initialised
service, a new ubus method "restart" in the ubus "service" path is needed
to trigger a ubus notify and also execute the installed service triggers.
Cc: Aaron Goodman
Signed-off-by: Florian Eckert
The original impleme
In order that the prcod restart service can also be triggered during a
firewall restart, this call function must be changed.
Signed-off-by: Florian Eckert
---
package/network/config/firewall/files/firewall.init | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/network/c
Remove trailing whitespace.
Signed-off-by: Florian Eckert
---
package/network/config/firewall/files/firewall.init | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/network/config/firewall/files/firewall.init
b/package/network/config/firewall/files/firewall.init
index e
Hello Petr
On 2020-12-17 10:12, Petr Štetiar wrote:
Florian Eckert [2020-12-17 09:40:08]:
With this change, the init script is now extend with the command to
get
this information easier.
I still lack the information about your use case, how do you use this
output
of this command.
Should
Florian Eckert [2020-12-17 09:40:08]:
Hi,
> By adding the extra command `procd` it is now possible to retrieve all
> relevant data from a procd started service directly via the init script.
>
> Until now, you have to query the ubus to get the information with the
> following command.
>
> `ubus
Philip Prindeville writes:
> https://github.com/openwrt/packages/pull/14240
>
> The previous one is a precursor for getting Bind to start before DHCPD.
That makes more sense yes.
I looked at it briefly. A couple of notes without testing:
I would not have used a key named "rdnc"-anything for z
By adding the extra command `procd` it is now possible to retrieve all
relevant data from a procd started service directly via the init script.
Until now, you have to query the ubus to get the information with the
following command.
`ubus call service list '{"name":"","verbose":true}'`
With this
33 matches
Mail list logo
