On 3/4/19 6:35 PM, Hauke Mehrtens wrote:
Hi,
The European commission asked for feedback on the Radio Equipment
Directive (RED) regarding the restrictions on "Upload of software on
radio equipment"
I posted here a comment in the name of the OpenWrt project:
https://ec.europa.eu/info/law/better-r
Hi,
OpenWrt is scanned by coverity static analyser [0] for quite some time
by now.
However only project members had access to it. I changed the project
to allow everybody to view the defects.
I hope more people take the chance and fix some of the issues.
Best,
lynxis
[0] https://scan.coverity.c
On Mon, Mar 4, 2019 at 10:31 AM Lorenzo Bianconi
wrote:
>
> > On Mon, Mar 4, 2019 at 1:07 AM Lorenzo Bianconi
> > wrote:
> > >
> > > > Lorenzo,I've pulled out all patches related to extended ham radio
> > > > channels and ath9k is same out of openwrt 18.06.2.I replaced
> > > > wpad-mini
Hi,
The European commission asked for feedback on the Radio Equipment
Directive (RED) regarding the restrictions on "Upload of software on
radio equipment"
I posted here a comment in the name of the OpenWrt project:
https://ec.europa.eu/info/law/better-regulation/initiatives/ares-2018-6621038/fee
Tomasz Maciej Nowak [2019-03-04 15:18:53]:
Hi,
> When doing upgrade from OpenWrt ar71xx image, it is recomended to not keep the
> old configuration.
why is that?
> + wan {
> + label = "epg5000:blue:wan";
> + gpios = <&gpio 22 GPIO_ACTIVE_LOW>
Hi Christian,
On 04.03.2019 13:16, Christian Lamparter wrote:
Hello,
On Sunday, March 3, 2019 8:57:03 PM CET Piotr Dymacz wrote:
I'm observing various I2C related issues on ALFA Network AP120C-AC board
with AT97SC3205T TPM module. As there was a major update of the I2C QUP
driver in 4.17, I d
Hi all,
I am running openWRT 18.06 on:
QCA9880 + QCA9558
driver: ath10k_pci
version: 4.9.111
firmware-version: 10.2.4-1.0-00033
AP is a dumbAP with three SSIDs on three different VLANs.
I am experiencing a random drop in A-MPDU and loss in throughput on
random clients. All clients start of with g
Tomasz Maciej Nowak [2019-03-04 19:25:12]:
> >>[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j
> >> $CONF_TAR"
> >>dd if="$sysup_file" bs=64k skip=1 2>/dev/null | \
> >> - mtd -r $append -Fkernel:$kern_length:0x8006,rootfs
> >> write - kerne
Signed-off-by: Tomasz Maciej Nowak
---
target/linux/tegra/config-4.19| 489 ++
...interrupts-due-to-tegra2-silicon-bug.patch | 77 +++
...enable-front-panel-leds-in-TrimSlice.patch | 46 ++
3 files changed, 612 insertions(+)
create mode 100644 target/linux/tegra
It is small form factor computer with rich amount of expansion ports.
Some hardware specs and supported features in this commit:
CPU: NVIDIA Tegra 2 @ 1GHz
RAM: 1GB DDR2-667
Storage: SDHC card slot
µSDHC card slot
USB to SATA bridge (depends on model)
1MB SPI NOR flash f
Add U-Boot for NVIDIA Tegra based boards, with the first being CompuLab
TrimSlice. This is part of initial support for this board.
Signed-off-by: Tomasz Maciej Nowak
---
package/boot/uboot-tegra/Makefile | 59 +++
.../tegra/base-files/lib/upgrade/platform.sh | 2 +
Support for Microelectronic EM3027 real time clock chip.
Signed-off-by: Tomasz Maciej Nowak
---
package/kernel/linux/modules/other.mk | 18 ++
1 file changed, 18 insertions(+)
diff --git a/package/kernel/linux/modules/other.mk
b/package/kernel/linux/modules/other.mk
index 22045
Tegra BCT and bootable flash image generator/compiler
>From documentation:
This project provides a tool which compiles BCT (Boot Configuration
Table) images to place into the boot flash of a Tegra-based device.
The tool will either:
a) Compile a textual representation of a BCT into a binary imag
This provides board configuraion tables for various Tegra boards needed
by cbootimage tool to create flashable bootloader images.
Signed-off-by: Tomasz Maciej Nowak
---
tools/Makefile| 2 +-
tools/cbootimage-configs/Makefile | 32 +++
2 files chan
New target introduces initial support for NVIDIA Tegra SoC based devices.
It focuses on Tegra 2 CPUs, for successors supporting NEON instruction
set the target should be split in two subtargets.
This initial commit doesn't create any device image, it's groundwork
for further additions.
Signed-off-
Main changes worth mentioning:
- update tools and U-Boot to recent versions,
- added support for 4.19 kernel
- now SD card image is also an rescue image with embedded U-Boot
- the SD card creation process is more generic which makes adding basic
support for other boards/devices trivial
1. https:
> On Mon, Mar 4, 2019 at 1:07 AM Lorenzo Bianconi
> wrote:
> >
> > > Lorenzo,I've pulled out all patches related to extended ham radio
> > > channels and ath9k is same out of openwrt 18.06.2.I replaced wpad-mini
> > > with the full version and "option encryption psk2". In testing betwee
Hi,
W dniu 04.03.2019 o 18:43, Petr Štetiar pisze:
> Tomasz Maciej Nowak [2019-03-04 15:18:06]:
>
> Hi,
>
>> -routerstation_do_upgrade() {
>> +redboot_fis_do_upgrade() {
>> local append
>> local sysup_file="$1"
>> local magic=$(get_magic_word "$sysup_file")
>> @@ -15,7 +15,7 @@ r
I've stopped any serious development on my 4.19 kernel, and am mostly
using 4.20 now. So, might be worth moving OpenWRT ath10k-ct to use the 4.20
kernel if it is not already doing so?
Thanks,
Ben
On 3/4/19 9:03 AM, David Bauer wrote:
This backports upstream commit
34d5629 ath10k: limit availa
Tomasz Maciej Nowak [2019-03-04 15:18:06]:
Hi,
> -routerstation_do_upgrade() {
> +redboot_fis_do_upgrade() {
> local append
> local sysup_file="$1"
> local magic=$(get_magic_word "$sysup_file")
> @@ -15,7 +15,7 @@ routerstation_do_upgrade() {
>
> [ -f "$CONF_TAR
This backports upstream commit
34d5629 ath10k: limit available channels via DT ieee80211-freq-limit
to the 4.19 ath10k-ct version. Without this patch, disabled channels
are still listed as a supported configuration for the radio.
The identical patch was also backported by OpenWRT to the non-ct d
This is continuation of effort in [1] PR to old LEDE source tree. It
received few improvement and some commits got split.
Main changes worth mentioning:
- update tools and U-Boot to recent versions,
- added support for 4.19 kernel
- now SD card image is also an rescue image with embedded of U-Boot
EnGenius EPG5000 (v1.0.0, marketed as IoT Gateway) is a dual band
wireless router.
Specification
SoC:Qualcomm Atheros QCA9558
RAM:256 MB DDR2
Flash: 16 MB SPI NOR
WIFI: 2.4 GHz 3T3R integrated
5 GHz 3T3R QCA9880 Mini PCIe card
Ethernet:
jjPlus JA76PF2 (marketed as IntellusPro2) is a network embedded board.
Specification
SoC:Atheros AR7161
RAM:64 MB DDR
Flash: 16 MB SPI NOR
Ethernet: 2x 10/100/1000 Mbps AR8316
LAN (CN11), WAN/PoE (CN6 - close to power barrel
co
In PR [1] introducing initial support for Ubiquiti RouterStation boards,
Mathias Kresin suggested to replace the combined sysupgrade image with
tarball generated by sysupgrade-tar.sh. This would simplify deployment
of sysupgrade as the kernel size (needed to update FIS partition) could
be simply ca
Hello,
On Sunday, March 3, 2019 8:57:03 PM CET Piotr Dymacz wrote:
> I'm observing various I2C related issues on ALFA Network AP120C-AC board
> with AT97SC3205T TPM module. As there was a major update of the I2C QUP
> driver in 4.17, I decided to backport whole series [1].
>
> I have patch read
> Lorenzo,I've pulled out all patches related to extended ham radio
> channels and ath9k is same out of openwrt 18.06.2.I replaced wpad-mini
> with the full version and "option encryption psk2". In testing between a
> mickrotik QRT5 and LHG5 about 10m apart (roof to office), ack_to will
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
Should it then be that if there is
28 matches
Mail list logo
