Hi Felix,
Thanks for reviewing the patch. please see my reply inline.
On 19/01/2016 12:09 AM, Felix Fietkau wrote:
On 2016-01-18 14:36, Jason Wu wrote:
Add support for Xilinx ZC702 Dev board
Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.
I symbolic linked /init with /sbin/init,
Hi
You should respond to the original mail and not create a new thread each
time
Le 19 janv. 2016 03:03, "Daniel Dickinson" daniel.thecshore.com
> a écrit :
>
> Hi John,
>
> Contrary to what you believed it is not possible for the ordinary users
(of which I am one at the moment) to modify their o
* Weedy [19.01.2016 07:46]:
> > I was wondering if there is a way to dissociate STAs who say go below a
> > minimum threshold SNR or signal level of say -65dBm in a multi-AP scenario?
> >
> option disassoc_low_ack1
> Adjust this code to trigger higher?
yes, this also helps but is NOT enough.
* Nishant Sharma [19.01.2016 07:46]:
> >ubus call hostapd.$dev del_client '{ "addr" : "$mac", "reason" :
> >"assoc toomany", "ban_time" : 1 }'
> Thanks for the pointers. It works for me.
>
> What exactly is ban_time unit? I presume it's millisecond.
yes, milliseconds.
> Where can I find mor
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/at91/image/Makefile| 2 +-
target/linux/at91/l
From: Daniel Dickinson
Lantiq has enough images to make it useful to get all profiles
and multi-profile select working properly, so this patch adds
an 'All Profiles' profile, however it is only used to allow
KConfig to select all profiles and is not used standalone to
build all targets, due to th
Any update about the patch?
Regards,
Tathagata
-Original Message-
From: Tathagata Das [mailto:tathag...@alumnux.com]
Sent: 12 January 2016 20:47
To: openwrt-devel@lists.openwrt.org
Cc: Tathagata Das
Subject: [PATCH] Add support for Netgear D7800
Signed-off-by: Tathagata Das
---
.../l
From: Daniel Dickinson
Brcm47xx has enough images to make it useful to get all profiles
and multi-profile select working properly, so this patch adds
an 'All Profiles' profile, however it is only used to allow
KConfig to select all profiles and is not used standalone to
build all targets, due to
From: Daniel Dickinson
For adm5120 the Generic profile was used to build images for all profiles;
change
this to the All profile and integrate with multiple (but not all) profile build
mechanism.
Signed-off-by: Daniel Dickinson
---
target/linux/adm5120/image/Makefile| 12 +-
From: Daniel Dickinson
Kirkwood has enough images to make it useful to get all profiles
and multi-profile select working properly, so this patch adds
an 'All Profiles' profile.
Signed-off-by: Daniel Dickinson
---
target/linux/kirkwood/image/Makefile | 27 ++
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/mpc85xx/image/Makefile | 2 +-
target/linux/mpc85xx/pr
From: Daniel Dickinson
Sunxi has enough images to make it useful to get all profiles
and multi-profile select working properly, so this patch adds
an 'All Profiles' profile, however it is only used to allow
KConfig to select all profiles and is not used standalone to
build all targets, due to the
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/brcm63xx/image/Makefile | 2 +-
target/linux/brcm63xx
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/ramips/image/Makefile | 12 ++--
target
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/arc770/generic/profiles/00-default.mk | 1 +
target/linux/arc7
From: Daniel Dickinson
Certain platforms have large numbers of possible images, and it can be
desirable to build neither all images nor only a single image,
therefore this patch makes selecting target profiles a menu instead of a
single choice, which allows the user to build a specific subset of
Hi all,
I noticed an error in handling of ubifs that didn't result in compile failures
but
likely would have broken images (I've only been able to test ar71xx images, and
compile tested some other platforms). The issue was that the profile was
missing from ubifs creation which means it wasn't pr
From: Daniel Dickinson
ar71xx is has one of the largest sets of images and it is
therefore very useful to be able select a subset > 1 of
target profiles for a build. This patch adds the menuconfig
and ar71xx image makefile parts needed to enable this
functionality.
Signed-off-by: Daniel Dickins
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/mvebu/image/Makefile | 4 ++--
target/linux/mvebu/pro
On Mon, Jan 18, 2016 at 9:39 AM, Nishant Sharma wrote:
> Hi,
>
> I was wondering if there is a way to dissociate STAs who say go below a
> minimum threshold SNR or signal level of say -65dBm in a multi-AP scenario?
>
option disassoc_low_ack1
Adjust this code to trigger higher?
Hi Bastian,
On Monday 18 January 2016 08:16 PM, Bastian Bittorf wrote:
ubus call hostapd.$dev del_client '{ "addr" : "$mac", "reason" :
"assoc toomany", "ban_time" : 1 }'
Thanks for the pointers. It works for me.
What exactly is ban_time unit? I presume it's millisecond.
Where can I find
Signed-off-by: Stijn Tintel
---
...-add-hash-state-import-and-export-support.patch | 114 +
1 file changed, 114 insertions(+)
create mode 100644
target/linux/generic/patches-4.4/150-crypto-ccp-add-hash-state-import-and-export-support.patch
diff --git
a/target/linux/generic
Signed-off-by: Stijn Tintel
---
target/linux/generic/config-4.4 | 1 +
1 file changed, 1 insertion(+)
diff --git a/target/linux/generic/config-4.4 b/target/linux/generic/config-4.4
index 6ad3008..a8b4074 100644
--- a/target/linux/generic/config-4.4
+++ b/target/linux/generic/config-4.4
@@ -748,6
Signed-off-by: Stijn Tintel
---
package/kernel/linux/modules/crypto.mk | 18 ++
1 file changed, 18 insertions(+)
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index 7c71053..99fb5a0 100644
--- a/package/kernel/linux/modules/crypto.m
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/arc770/generic/profiles/00-default.mk | 1 +
target/linux/arc7
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/ramips/image/Makefile | 12 ++--
target
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/mvebu/image/Makefile | 4 ++--
target/linux/mvebu/pro
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/brcm63xx/image/Makefile | 2 +-
target/linux/brcm63xx
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/mpc85xx/image/Makefile | 2 +-
target/linux/mpc85xx/pr
From: Daniel Dickinson
Lantiq has enough images to make it useful to get all profiles
and multi-profile select working properly, so this patch adds
an 'All Profiles' profile, however it is only used to allow
KConfig to select all profiles and is not used standalone to
build all targets, due to th
From: Daniel Dickinson
Kirkwood has enough images to make it useful to get all profiles
and multi-profile select working properly, so this patch adds
an 'All Profiles' profile.
Signed-off-by: Daniel Dickinson
---
target/linux/kirkwood/image/Makefile | 27 ++
From: Daniel Dickinson
Brcm47xx has enough images to make it useful to get all profiles
and multi-profile select working properly, so this patch adds
an 'All Profiles' profile, however it is only used to allow
KConfig to select all profiles and is not used standalone to
build all targets, due to
From: Daniel Dickinson
For adm5120 the Generic profile was used to build images for all profiles;
change
this to the All profile and integrate with multiple (but not all) profile build
mechanism.
Signed-off-by: Daniel Dickinson
---
target/linux/adm5120/image/Makefile| 12 +-
From: Daniel Dickinson
Certain platforms have large numbers of possible images, and it can be
desirable to build neither all images nor only a single image,
therefore this patch makes selecting target profiles a menu instead of a
single choice, which allows the user to build a specific subset of
From: Daniel Dickinson
Sunxi has enough images to make it useful to get all profiles
and multi-profile select working properly, so this patch adds
an 'All Profiles' profile, however it is only used to allow
KConfig to select all profiles and is not used standalone to
build all targets, due to the
From: Daniel Dickinson
ar71xx is has one of the largest sets of images and it is
therefore very useful to be able select a subset > 1 of
target profiles for a build. This patch adds the menuconfig
and ar71xx image makefile parts needed to enable this
functionality.
Signed-off-by: Daniel Dickins
From: Daniel Dickinson
Minor fixes so that the former 'Default' profile (now All)
not only builds all profiles but acts correctly in the
new multi-profile build machinery/menuconfig
Signed-off-by: Daniel Dickinson
---
target/linux/at91/image/Makefile| 2 +-
target/linux/at91/l
This patch series enables the selection and building of a subset
of profiles to build for a target, rather than the previous
limitation of only being able to build a single target (although
some platforms had profiles that built all other profiles for
the target, but that still ends up as an all-or
Hi John,
Contrary to what you believed it is not possible for the ordinary users
(of which I am one at the moment) to modify their own patches, so I
can't discard, archive, or otherwise do anything to patches even my own.
Regards,
Daniel
___
openwr
Set both group and pairwise cipher for wpa_supplicant if cipher
is set.
Depends on netifd patch http://patchwork.ozlabs.org/patch/569702/
for cosmetic reasons and changes the use of no longer set
$wpa_pairwise into $wpa_cipher also for AP mode.
Signed-off-by: Daniel Golle
---
package/network/ser
Introduce config options client_cert2, priv_key2 and priv_key2_pwd
used for EAP-TLS phase2 authentication in WPA-EAP client mode.
Signed-off-by: Daniel Golle
---
package/network/services/hostapd/files/netifd.sh | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/p
Signed-off-by: Daniel Golle
---
package/network/services/hostapd/files/hostapd-full.config| 3 +++
package/network/services/hostapd/files/wpa_supplicant-full.config | 3 +++
2 files changed, 6 insertions(+)
diff --git a/package/network/services/hostapd/files/hostapd-full.config
b/packag
Signed-off-by: Daniel Golle
---
package/network/services/uhttpd/Makefile | 4
1 file changed, 4 insertions(+)
diff --git a/package/network/services/uhttpd/Makefile
b/package/network/services/uhttpd/Makefile
index 2b05abf..da5572b 100644
--- a/package/network/services/uhttpd/Makefile
+++ b/
The image name for the HiLink HLK-RM04 module has a typo and should read "RM04"
rather than "RM02"
Signed-off-by: John Clark
---
target/linux/ramips/image/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ramips/image/Makefile
b/target/linux/ramips/image
On 2016-01-18 20:00, John Clark wrote:
> I apologize for the first two messages (/patch/569488/ and /patch/569490/)
> where the patch had unwanted line breaks -- sending this one using git
> send-email.
>
> The image name for the HiLink HLK-RM04 module has a typo and should read
> "RM04" rather
We shall enforce the cipher for both, pairwise and group, thus change
the name of the variable to a more generic phrasing, 'cipher' instead
of 'pairwise'.
Signed-off-by: Daniel Golle
---
scripts/netifd-wireless.sh | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/s
Signed-off-by: Daniel Golle
---
target/linux/oxnas/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/oxnas/Makefile b/target/linux/oxnas/Makefile
index 2d244db..f4a01f1 100644
--- a/target/linux/oxnas/Makefile
+++ b/target/linux/oxnas/Makefile
@@ -15,7 +15,
Signed-off-by: Daniel Golle
---
target/linux/oxnas/config-4.4 | 383 +
.../010-arm_introduce-dma-fiq-irq-broadcast.patch | 68
.../250-add-plxtech-vendor-prefix.patch| 10 +
.../patches-4.4/300-introduce-oxnas-platform.patch | 71
Signed-off-by: Daniel Golle
---
target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c | 5 +
target/linux/oxnas/files/drivers/irqchip/irq-rps.c| 4
2 files changed, 9 insertions(+)
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c
b/target/linux/oxnas/f
Signed-off-by: Shonn Lu
---
target/linux/oxnas/base-files/etc/board.d/01_leds | 2 +-
target/linux/oxnas/base-files/etc/diag.sh | 4 ++--
target/linux/oxnas/base-files/lib/oxnas.sh| 6 +++---
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/target/linux/oxnas/base-fi
Signed-off-by: Shonn Lu
Acked-by: Daniel Golle
---
target/linux/oxnas/base-files/etc/board.d/01_leds | 2 +-
target/linux/oxnas/base-files/etc/diag.sh | 4 ++--
target/linux/oxnas/base-files/lib/oxnas.sh| 6 +++---
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/ta
Thanks Jonas. Tested and working OK. It would be nice if the patch is also
backported to Chaos Calmer revision.
Regards.
2016-01-18 14:16 GMT+01:00 Jonas Gorski :
> Hi,
>
> On 12 December 2015 at 14:10, dani wrote:
> > Currently ephy-reset, which uses a GPIO for enabling external ethernet
> phy
Signed-off-by: Stijn Tintel
---
target/linux/generic/config-4.1 | 2 ++
1 file changed, 2 insertions(+)
diff --git a/target/linux/generic/config-4.1 b/target/linux/generic/config-4.1
index 222f8c1..d91bedb 100644
--- a/target/linux/generic/config-4.1
+++ b/target/linux/generic/config-4.1
@@ -760
Since CRYPTO_DRBG_MENU was added in r48277, CRYPTO_DRBG_HMAC is missing.
It does not appear in kernel_menuconfig and defaults to yes, so enable
it in crypto-rng as well and add dependencies to HMAC and SHA256.
Signed-off-by: Stijn Tintel
---
package/kernel/linux/modules/crypto.mk | 5 +++--
1 fi
dnsmasq offers to group DHCP options and their values by a network-id
and to send options only to hosts which have been tagged with that
network-id.
uci acceps the mac classifier, but only for a single MAC
config mac 'opnvpn'
option mac '00:FF:*:*:*:*'
option networkid 'opnvpn'
I apologize for the first two messages (/patch/569488/ and /patch/569490/)
where the patch had unwanted line breaks -- sending this one using git
send-email.
The image name for the HiLink HLK-RM04 module has a typo and should read "RM04"
rather than "RM02"
Signed-off-by: John Clark
---
targe
This patch introduces support of new boards with ARC HS38 cores.
ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA.
As with ARC770 we're addind support for 2 boards for now:
[1] Synopsys SDP board (AXS103)
This is the same base-board as in AXS101 but with
FPGA-based CPU
This change adds support of ARC ISAv2 processors in
OpenWRT toolchain.
In general gcc for ARC may compile code for both ISA versions
simultaneously but libgcc will be built only for default
architecture that's why it's necessary to specify --with-cpu
on gcc configuration.
As for uClibc we need to
This patch introduces support of new boards with ARC HS38 cores.
ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA.
Because of new ISA ARC HS38 are binary incompatible with ARC 700
cores which requires both separate toolchain and target applications
including Linux kernel for that
Most of currently mentioned CFLAGS in arc770/Makefile
are not really required because:
[1] "-Os -pipe" are set by default in include/target.mk
[2] "-fno-caller-saves" gets enabled via menuconfig
as an extra compiler flag for developers
So the only one that makes sense is "-matomic" and
that
While bumping kernel version kernel command line was
unintentionally modified in attempt to make it closer
to upstream version.
In case of AXS that has not only serial port but HDMI/USB
both capable of being debug console we have 2 entries in
kernel's command line:
--->8---
Signed-off-by: Petr Štetiar
---
Changes in v2:
* added dependency on imx6 target (Felix)
package/kernel/linux/modules/other.mk | 16
1 file changed, 16 insertions(+)
diff --git a/package/kernel/linux/modules/other.mk
b/package/kernel/linux/modules/other.mk
index 62fdc3c..4
* Nishant Sharma [18.01.2016 15:40]:
> I was wondering if there is a way to dissociate STAs who say go below
> a minimum threshold SNR or signal level of say -65dBm in a multi-AP
> scenario?
we also faced this, while doing roaming.
i workaround is to have something like:
#!/bin/sh
iw event | wh
Hi,
I was wondering if there is a way to dissociate STAs who say go below a
minimum threshold SNR or signal level of say -65dBm in a multi-AP scenario?
As we do not run our OpenWRT APs with a WLAN controller, which can
automatically change channels or increase/decrease the txpower, would it
On 2016-01-18 14:36, Jason Wu wrote:
> Add support for Xilinx ZC702 Dev board
>
> Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.
>
> I symbolic linked /init with /sbin/init, I am sure this is
> acceptable from OpenWrt (although this can be workaround with
> rdinit="/sbin/init" in boo
Add support for Xilinx ZC702 Dev board
Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.
I symbolic linked /init with /sbin/init, I am sure this is
acceptable from OpenWrt (although this can be workaround with
rdinit="/sbin/init" in bootargs but requires DTS modification).
Patch is tes
Hi,
On 6 January 2016 at 20:02, Rafał Miłecki wrote:
> Signed-off-by: Rafał Miłecki
> ---
> .../generic/files/drivers/net/phy/b53/b53_common.c | 40
> ++
> 1 file changed, 40 insertions(+)
>
> diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c
> b/tar
Hi,
On 6 January 2016 at 20:02, Rafał Miłecki wrote:
> Signed-off-by: Rafał Miłecki
Please don't leave the commit log empty. E.g. state why you need to
add this new function.
> ---
> .../generic/files/drivers/net/phy/b53/b53_mdio.c | 20
>
> .../generic/files/drivers/
Hi,
On 20 December 2015 at 04:52, Mohammed Berdai wrote:
> This router is a ZyXEL VDSL2 router and its board has :
> chip ID: BCM6368B2, MIPS: 400MHz,
> Total Flash size: 16384K with 128 sectors
> Total Memory: 67108864 bytes (64MB)
> Board Id (0-15): 96368MVWG
>
> with a usb port, and wifi Broad
Hi,
On 16 December 2015 at 23:05, Álvaro Fernández Rojas wrote:
> Signed-off-by: Álvaro Fernández Rojas
in the future I will reject patches with an empty commit message.
Applied in r48305.
Jonas
___
openwrt-devel mailing list
openwrt-devel@lists.op
Hi,
On 12 December 2015 at 14:10, dani wrote:
> Currently ephy-reset, which uses a GPIO for enabling external ethernet phys,
> is broken.
> This patch fix the problem.
>
> This problem causes in boards with external phys with a reset pin connected
> to gpio, are
> initialized without lan interf
Hi,
On Wed, Dec 2, 2015 at 9:37 PM, dani wrote:
> In the HG556a router the partition mtd0, where CFE lives, is read only.
> This patch allows this partition to be writeable.
>
> The BCM6358 SoC has two cores, but they are not identical. The second core has
> half icache.
> core0: icache=32kB
> co
Hi.
The change is fine with me but shouldn't we keep checking whether
there's at least one mac given?
~ Jow
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Applied in r48301 - thanks!
~ Jow
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Trying again, I see gmail mangled the previous message...
The image name for the HiLink HLK-RM04 module has a typo and should read
"RM04" rather than "RM02"
Signed-off-by: John Clark
---
target/linux/ramips/image/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/ta
The image name for the HiLink HLK-RM04 module has a typo and should read
"RM04" rather than "RM02"
Signed-off-by: John Clark
---
target/linux/ramips/image/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ramips/image/Makefile
b/target/linux/ramips/image/M
76 matches
Mail list logo
