From: Alexandru Ardelean
Seems the match pattern was being adapted from 'eth0' to ' eth0'
because of the way I added the procd command args.
This did not seem to be a problem when there were multiple interfaces,
just on devices with single interfaces for lldpd to listen on.
Signed-off-by: Alexa
Hi,
The current OpenWrt trunk does not have working USB support for the
Netgear WNR2200.
(See discussion at https://dev.openwrt.org/ticket/15267)
There seem to be two problems:
== 1. ==
Review needed for the gpio patch for working USB.
I understand that there was a previous patch submission, bu
On 24/09/15 17:54, Steven Barth wrote:
> Okay, we can do this, however we need to figure 3 things out first.
>
> 1. Disable boguspriv, doing both is unintuitive.
ok, so extra lines for .10, 16-32.172, 168.192 - an extra 18 lines in
total. And an update to luci to remove the bogus priv tick box?
Okay, we can do this, however we need to figure 3 things out first.
1. Disable boguspriv, doing both is unintuitive.
2. Make sure it doesn't broke reverse resolving locally known hosts,
i.e. those in the hostfiles and those that have a DHCP lease.
3. Make sure that doesn't break applications that
On 24/09/15 15:57, Steven Barth wrote:
> There is already "option boguspriv 1" so I do not really see the point.
>
>
> Cheers,
>
> Steven
> ___
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/li
From: Karl Palsson
Different distributions have different names for the lua 5.1 package.
Use cmake's built in pkg-config support to search for the first one,
rather than running it explicitly and searching for a single version.
Signed-off-by: Karl Palsson
---
Resending after running into this
There is already "option boguspriv 1" so I do not really see the point.
Cheers,
Steven
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
A kind reminder to please incorporate or comment on my patch. I think this
fix should also be backported to CC, BB, and possibly AA as well. Thank you
in advance for your consideration and thoughts/comments.
Best Regards,
Ryan Lindeman
On Fri, Aug 28, 2015 at 2:05 PM, Ryan Lindeman
wrote:
> Th
Due to datasheet of rt3883 SoC rgmii1 port handles pins 84-95 and rgmii2 port
handles pins 72-83. When this function ports gets added to rt3883_pinmux_data
there's wrong pinmux bits set (RT3883_GPIO_MODE_GE1 manages 84-95 pins and
RT3883_GPIO_MODE_GE2 manages 72-83). So when enabling rgmii2 as G
Only add 'cuImage.tl-wdr4900-v1' to KERNEL_IMAGES if
the selected subtarget is 'generic'.
Signed-off-by: Alexandru Ardelean
---
target/linux/mpc85xx/Makefile | 7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/target/linux/mpc85xx/Makefile b/target/linux/mpc85xx/Makefile
i
RFC6303 specifies reverse dns zones that ideally should not be forwarded
to upstream (root) servers and create unnecessary load upon them.
Signed-off-by: Kevin Darbyshire-Bryant
---
package/network/services/dnsmasq/files/dhcp.conf | 12
1 file changed, 12 insertions(+)
diff --git a
dnsmasq uses /etc/dnsmasq.time as record of the last known good
system time to aid its validation of dnssec timestamps. dnsmasq
updates the timestamp on process start/stop once it considers the system
time as valid. The timestamp file should be preserved across system
upgrade but should not be inc
Hi John,
On Thu, Sep 24, 2015 at 11:36 AM, John Crispin wrote:
> its in trunk finally, sorry for the delay
Great, thanks!
BR,
Drasko
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/open
On 24/09/2015 11:32, Rafał Miłecki wrote:
> Recently all targets have been updated to call nand_do_upgrade directly.
> It's not needed anymore to leave a magic /tmp/sysupgrade-nand-path mark
> during image check.
>
> Signed-off-by: Rafał Miłecki
Acked-by: John Crispin
> ---
> I'll wait a we
On Wed, Sep 23, 2015 at 11:44 PM, Kristian Evensen <
kristian.even...@gmail.com> wrote:
> On Wed, Sep 23, 2015 at 1:23 PM, Kristian Evensen
> wrote:
> > On Wed, Sep 23, 2015 at 1:07 PM, Hans Dedecker
> wrote:
> >> Indeed we're using source based routing in combination with a default
> route
> >>
its in trunk finally, sorry for the delay
On 23/09/2015 20:23, Drasko DRASKOVIC wrote:
> A kind reminder,
> please someone take a look at this patch and integrate it if it is OK.
>
> BR,
> Drasko
>
>
> On Sun, Sep 20, 2015 at 7:27 PM, Drasko DRASKOVIC
> wrote:
>> Add support for WeIO board (ht
Recently all targets have been updated to call nand_do_upgrade directly.
It's not needed anymore to leave a magic /tmp/sysupgrade-nand-path mark
during image check.
Signed-off-by: Rafał Miłecki
---
I'll wait a week or two before pushing it. Maybe it'll make someone test
it just in case :)
---
pa
17 matches
Mail list logo
