On 2015-07-31 11:01, Dmitry Ivanov wrote:
> Restore AP scan patch.
>
> Signed-off-by: Dmitry Ivanov
Applied. Next time, please add the right prefix in the subject
(mac80211:), and do not repeat the subject in the email body.
Thanks,
- Felix
___
openwr
Hi,
Daniel Golle wrote:
Similar to brcm2708 have framebuffer video support built-in so
fbconsole gets initialized during boot.
Plus more kernel config carefully sync'ed against upstream
sunxi_defconfig.
Signed-off-by: Daniel Golle
---
target/linux/sunxi/config-4.1 | 599
Daniel Golle wrote:
Newer kernels make use of libahci in ahci-platform, ie. also on non-PCI
platforms.
As there is no single config symbol deciding whether libahci.ko is
being built or not it seems the most sensitive thing to package it in
kmod-ata-core.
Signed-off-by: Daniel Golle
---
[sni
Hi,
Daniel Golle wrote:
This package contains the WiFi NVRAM distributed with Bananian [1].
It's currently needed to use the WiFi module (BCM43362 SDIO) on the
BananaPro with the brcmfmac cfg80211 driver which doesn't yet support
retrieving calibration data via device-tree or platform_data.
(DO
The first command compiles all subpackages listed in radvd/Makefile. You
never compile subpackages directly.
Em sex, 31 de jul de 2015 às 08:39, Pratik Prajapati <
pratik.prajapat...@gmail.com> escreveu:
> Hi,
>
> I we write makefile using this approach
> https://dev.openwrt.org/browser/packages
On Sun, 26 Jul 2015, Zoltan HERPAI wrote:
On Fri, 24 Jul 2015, John Crispin wrote:
On 16/07/2015 22:20, Matthias Schiffer wrote:
-BOARDS:= \
- sun4i-a10-cubieboard \
- sun4i-a10-olinuxino-lime \
- sun4i-a10-pcduino \
- sun5i-a13-olinuxino \
- sun6i-a31-colombus \
Switch to new 8250 debug uart code because the old
mach-mcs814x/include/mach/debug-macro.S tries to include
asm/hardware/debug-8250.S which no longer exists since kernel 3.14
Signed-off-by: Günther Kelleter
---
target/linux/mcs814x/config-3.18 | 10 --
.../linux/mcs814x/pat
uImage is now bigger than 1MB. To avoid editing the dts every time
the kernel size changes use fw splitter.
Signed-off-by: Günther Kelleter
---
target/linux/mcs814x/config-3.18 | 4
.../mcs814x/files-3.18/arch/arm/boot/dts/dlan-usb-extender.dts| 8 --
create explicit 1:1 mapping before mcs814x_alloc_gc/irq_setup_generic_chip
marks all interrupts used and prevents mapping by dts init.
IRQ 0 is the timer interrupt and is not illegal!
Was broken since kernel 3.14.
Signed-off-by: Günther Kelleter
---
target/linux/mcs814x/files-3.18/arch/arm/mach
Patches fix interrupt init, timer irq and debug UART for mcs814x.
dLAN USB Extender kernel got too big to fit in 1MB so I changed dts
partition layout and image builder to make use of automatic
partition splitting.
Please apply to trunk and CC/15.05!
changes since v2:
change commit messages
I'm s
Hi,
I we write makefile using this approach
https://dev.openwrt.org/browser/packages/ipv6/radvd/Makefile
make package/radvd/compile V=s works
but
make package/radvdump/compile V=s doesn't work
Why?
How to correct this?
___
openwrt-devel maili
Hello, sorry I did not explain myself correctly.
$(eval $(call bcm63xxCfe,FAST2604 ,F@ST2604 ,fast2604 ,F@ST2604,...
$(eval $(call bcm63xxCfe,FAST2704N,FAST2704N,fast2704n,F@ST2704N,...
If I use the the @ symbol in the 3rd argument (DEVICE_NAME), then the
kernel does not boot any-more.
Lo
/etc/config/wireless
On Fri, 31 Jul 2015, N.Leiten wrote:
Date: Fri, 31 Jul 2015 12:32:14 +0300
From: N.Leiten
To: openwrt-devel@lists.openwrt.org
Subject: Re: [OpenWrt-Devel] Change OpenWrt Wifi default settings
In email dated Пятница - 31 июля 2015 17:08:23 user John kerry wrote:
Hi,
I am
In email dated Пятница - 31 июля 2015 17:08:23 user John kerry wrote:
> Hi,
>
> I am working on Ar71xx openWRT Luci project. By default the Wi-Fi is
> disabled and SSID is OpenWrt. I need to change the default settings.
> Could anyone help me to change the default settings.
>
>
> Best Regards,
>
On 31/07/2015 11:23, Sven Eckelmann wrote:
> On Friday 31 July 2015 10:33:59 John Crispin wrote:
> [...]
>>> What about the other problems like wrong settings width, wrong settings
>>> position and missing settings? Should I resend them?
>>
>> which patch exactly ?
>
> I have now submitted the p
On Friday 31 July 2015 10:33:59 John Crispin wrote:
[...]
> > What about the other problems like wrong settings width, wrong settings
> > position and missing settings? Should I resend them?
>
> which patch exactly ?
I have now submitted the patch but this time split into separate
patches [1,2,3]
The MT7621 uses a 2 bit wide configuration of the sdhci, spi, mdio, pcie,
wdt, uart2 and uart3 in the GPIO_MODE register. It was correctly done
for sdhci, spi, pcie and wdt, The same has to be done for uart3, uart2
and mdio.
Signed-off-by: Sven Eckelmann
---
v2:
- split into multiple patches
.
The pinctrl-rt2880 code doesn't support multiple functions with the same
name. This will result in a incorrect pinmux configuration.
Signed-off-by: Sven Eckelmann
---
This is the patch which John Crispin wanted to
drop and instead rewrite the pinctrl-rt2880. It is just here for
completeness.
v2
The PINS conntrolled by the SPI bits in the GPIO_MODE register is always
7 and not 8 for nand mode.
Signed-off-by: Sven Eckelmann
---
v2:
- split into multiple patches
.../linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
The uart3 setting in GPIO_MODE register is before the uart2 setting. Also
don't mix uart2 and uart3 function/groups.
Signed-off-by: Sven Eckelmann
---
v2:
- split into multiple patches
.../ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch | 8
1 file changed, 4 insertions(
Hi,
I am working on Ar71xx openWRT Luci project. By default the Wi-Fi is
disabled and SSID is OpenWrt. I need to change the default settings.
Could anyone help me to change the default settings.
Best Regards,
John
___
openwrt-devel mailing list
openwrt
Restore AP scan patch.
Signed-off-by: Dmitry Ivanov
---
package/kernel/mac80211/patches/210-ap_scan.patch | 11 +++
1 file changed, 11 insertions(+)
create mode 100644 package/kernel/mac80211/patches/210-ap_scan.patch
diff --git a/package/kernel/mac80211/patches/210-ap_scan.patch
b/pa
Signed-off-by: Florian Eckert
Signed-off-by: Helge Mader
Tested-by: Martin Blumenstingl
---
v2 fix annex and line mode comma
v2 fix latency to ms
.../lantiq/base-files/lib/functions/lantiq_dsl.sh | 423 +++-
1 file changed, 411 insertions(+), 12 deletions(-)
mode change 100
Do not wait for scan results if scan request failed.
Signed-off-by: Dmitry Ivanov
---
iwinfo_nl80211.c | 14 ++
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/iwinfo_nl80211.c b/iwinfo_nl80211.c
index 900eef2..251ec33 100644
--- a/iwinfo_nl80211.c
+++ b/iwinfo_nl80211
On 07/28/15 01:27, Wojtek Sawaściuk wrote:
> Hello,
> What is current status of support for Ubiquity's EdgeRouter POE (this
> one with 2+3switch ports) ?
>
> I can't flash it with sysupgrade using openwrt-15.05-rc3-octeon-er:
>
> "Sysupgrade is not yet supported on cavium,octeon-3860.
> Image check
Signed-off-by: Álvaro Fernández Rojas
---
target/linux/brcm2708/image/config.txt | 6 ++
1 file changed, 6 insertions(+)
diff --git a/target/linux/brcm2708/image/config.txt
b/target/linux/brcm2708/image/config.txt
index 9e6e8e9..f66f6bc 100644
--- a/target/linux/brcm2708/image/config.txt
++
Signed-off-by: Álvaro Fernández Rojas
---
package/kernel/brcm2708-gpu-fw/Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/kernel/brcm2708-gpu-fw/Makefile
b/package/kernel/brcm2708-gpu-fw/Makefile
index 5484af0..0f1e96e 100644
--- a/package/kernel/brcm270
Signed-off-by: Álvaro Fernández Rojas
---
target/linux/brcm2708/modules.mk | 8 ++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/target/linux/brcm2708/modules.mk b/target/linux/brcm2708/modules.mk
index 5c87c15..03aa19b 100644
--- a/target/linux/brcm2708/modules.mk
+++ b/tar
Signed-off-by: Álvaro Fernández Rojas
---
target/linux/brcm2708/image/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/brcm2708/image/Makefile
b/target/linux/brcm2708/image/Makefile
index 2afd29b..266cc67 100644
--- a/target/linux/brcm2708/image/Makefile
On Thursday 30 July 2015 14:23:06 John Crispin wrote:
>
> On 29/07/2015 17:19, Sven Eckelmann wrote:
> > The pinctrl-rt2880 code doesn't support multiple functions with the same
> > name. This will result in incorrect pinmux configuration.
> >
> > The MT7621 uses 2 bit wide configuration of the s
30 matches
Mail list logo
