https://tools.ietf.org/html/rfc6587#section-3.4.2
the idea is to add \n or \0 as message trailer so it's easier
to find message end
v2: simplify, use \n by default, with optional \0
Signed-off-by: Etienne CHAMPETIER
---
log/logread.c | 16
1 file changed, 12 insertions(+), 4 de
i'll test it on device myself tomorrow :) not near hw just now
On 02/04/2015 00:23, Etienne Champetier wrote:
> Hi
>
> I've just tested the patch and it need some fixing,
> see my comments/fixes inline.
>
> I will not be able to tests other patches until ~1 week,
> but you can test simply using
Hi
I've just tested the patch and it need some fixing,
see my comments/fixes inline.
I will not be able to tests other patches until ~1 week,
but you can test simply using netcat (nc -l 5140) and watching with tcpdump
-i any port 5140 -vvvX
Your code is cleaner but it's 2 syscalls instead of 1 e
> On 28-03-2015 17:43, Cezary Jackiewicz wrote:
> > Why you do that? ncm from gcom-ncm is enough, you do not have to do
> > specifically the new protocol. Just set /dev/cdc-wdm0 as device. Tested
> > with E3131 in huawei/ncm mode.
>
> Well, i saw that code, but found it to be quite slow and unreli
Hi,
Le 1 avr. 2015 19:25, "John Crispin" a écrit :
>
> Hi,
>
> i have just cooked up an alternative patch to do this. i think we should
> make \0 or \n a default and then add an option to switch to the other.
> which one would make more sense as a default ?
>
Thanks for your quick answer!
I thin
Hi,
i have just cooked up an alternative patch to do this. i think we should
make \0 or \n a default and then add an option to switch to the other.
which one would make more sense as a default ?
John
On 01/04/2015 18:33, Etienne CHAMPETIER wrote:
> https://tools.ietf.org/html/rfc6587#se
https://tools.ietf.org/html/rfc6587#section-3.4.2
the idea is to add \n or \0 as message trailer so it's easier
to find message end
Signed-off-by: Etienne CHAMPETIER
---
log/logread.c | 38 +++---
1 file changed, 31 insertions(+), 7 deletions(-)
diff --git a/log/
Hi David,
thanks for the reply, i was looking at this ticket ->
https://dev.openwrt.org/ticket/19121
so i will just reply, that they should downgrade to the linux version
of the firmware.
John
On 01/04/2015 17:51, David Hutchison wrote:
> Hello John,
>
> One of our customers use the 34
Hello John,
One of our customers use the 340U, and the latest firmware revision
that fixes Windows 8 support.. broke linux support (
http://mtekk.us/archives/guides/netgear-aircard-340u-linux/ ) We had
to downgrade the firmware on the 340u itself.
I don't think they have released a firmware fix w
Hi!
I found strange things happening with building result on ar71xx for
tl-wdr3500:
- factory is less in size, than sysupgrade
- sysupgrade sized as flash - 8G
- flashed system (both - factory and sysupgrade) boots (asterisk led
stops blinking), but does not answer on any IP
-- /aTan
__
Hi,
it seems that umbim has problems talking to this device. without
hardware to test on it will be hard to figure out what is wrong.
does anyone have a spare/unlocked Sierra Wireless AirCard 340U ?
John
___
openwrt-devel mailing list
openwrt-d
Newly added savedir should be at the last position while
uci_add_delta_path() will add it to the position second to the last.
Signed-off-by: Yousong Zhou
---
delta.c |5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/delta.c b/delta.c
index 357f5c7..459d2c7 100644
--- a/
- With "uci -P xxx/ export", changes in "xxx/" should be applied last.
- With "uci -p xxx/ commit", changes in "xxx/" should be applied before
ctx->savedir.
Signed-off-by: Yousong Zhou
---
test/references/cli.options.delta.commit.result |5 +
test/references/cli.options.delta.export
Hello All,
As I roughly outlined before in another thread ("synchronous network
reload/restart"), I am trying to re-configure several dependent network
interfaces thru ubus/netifd on BB.
I have one physical wireless device and 3 virtual interfaces:
- moni (moni0)
- mesh (mesh0)
- ap (ap0)
On
2015-04-01 12:02 GMT+03:00 John Crispin :
> Hi,
>
> did you runtime test this ?
>
No I did not. I do not have hw with this switch. Only compile tested.
spi_ks8995.c from 3.18.9 kernel differ from sources in spi-ks8995
package in several lines: register size made dynamic in upstream. All
other code
Hi,
did you runtime test this ?
John
On 01/04/2015 01:50, Sergey Ryazanov wrote:
> This driver is upstream since 2012 (commit: a8e510f682f), so switch to
> it and remove own sources. Also place it under "Network Devices" menu
> together with other phy drivers.
>
> Signed-off-by: Sergey
Hi,
please don't use [dnsmasq]. use dnsmasq: instead. otherwise git am does
not pick it up. i fixed this manually now so you dont need to send a v3
John
On 01/04/2015 01:11, Stefan Tomanek wrote:
> This patch backports the option --tftp-no-fail to dnsmasq and prevents the
> service from
17 matches
Mail list logo
