On Tue, Dec 30, 2014 at 04:10:56AM +0100, Linus Lüssing wrote:
> The following patches unfortunately didn't hit the kernel stable
> branches yet, therefore cherrypicking them for OpenWRT here:
>
> * bridge: fix netfilter/NF_BR_LOCAL_OUT for own, locally generated queries
> * bridge: multicast: ena
I believe this is the appropriate forum for discussing this. Let me
know if this is not the case.
I think that employing the syscfg partition as the overlayfs is not
useful for this device, and for at least one case, harmful.
The current setup that allows for a primary and alternate firmware
ima
2015-01-13 8:46 GMT+01:00, Zoltan HERPAI :
> I haven't seen any flags that does SDIO_SUPPORT or something similar. It's
> either removing "depend on USB_SUPPORT" or add dependencies for the
> targets that'll use the SDIO part. Do you know of other approach?
>
> Thanks,
> -w-
>
You are right: there
Set static IP for your computer, like 192.168.1.10, subnet
255.255.255.0 and try then.
Sami Olmari
On Tue, Jan 13, 2015 at 5:06 PM, Yilun Zhou wrote:
> Hi,
>
> I am experimenting with OpenWRT Attitude Adjustment on NETGEAR WNDR3800. I
> accidentally wrote wrong network configuration file and co
Some Huawei mobile broadband sticks utilizing the NCM protocol expose
the control channel as a cdc-wdm device node instead of a virtual TTY.
This device node does not support the terminal ioctls. This patch
adds a check whether the provided device is a TTY or not and does not
attempt to use the ter
Otherwise libatomic cannot be used in conjunction with external toolchains.
Signed-off-by: Helmut Schaa
---
package/libs/toolchain/Makefile | 9 +
1 file changed, 9 insertions(+)
diff --git a/package/libs/toolchain/Makefile b/package/libs/toolchain/Makefile
index 1a75e90..42b9935 100644
Signed-off-by: Maxime Ripard
---
target/linux/mvebu/image/Makefile | 1 +
.../020-armada-385-rd-mtd-partitions.patch | 24 ++
2 files changed, 25 insertions(+)
create mode 100644
target/linux/mvebu/patches-3.18/020-armada-385-rd-mtd-partitions.patch
Hi,
This serie aims at finally fixing the already supported mvebu boards
images, since none of them actually work on the boards except for the
WRT1900AC.
This is the follow-up of two previous attempts at doing that:
https://lists.openwrt.org/pipermail/openwrt-devel/2014-October/028593.html
https:
The Armada 385 DB AP board is a reference design board for access
points.
Signed-off-by: Maxime Ripard
---
target/linux/mvebu/image/Makefile | 1 +
...nctrl-mvebu-a38x-Add-UART1-muxing-options.patch | 43
.../013-ARM-mvebu-a38x-Fix-node-names.patch| 98 +
While we supported only the NAND so far, some boards use a NOR, which requires
a different set of UBI options.
Add a new subprofile type for such boards.
Signed-off-by: Maxime Ripard
---
target/linux/mvebu/image/Makefile | 26 ++
1 file changed, 26 insertions(+)
diff --
The 3.16 kernel introduced support for the A38x SoC family. In order to support
them, switch to the newer 3.18 kernel.
Signed-off-by: Maxime Ripard
---
target/linux/mvebu/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/mvebu/Makefile b/target/linux/mvebu
All the boards but Mamba had wrong UBI options so far, making it impossible to
flash the built image on their storage medium.
Fix all of the supported boards in order to make the generated images useful.
Tested on a Mirabox, an Armada XP GP and an Openblocks AX3, and used the NAND
chip datasheet
In order to support the various board NAND layout that we support, introduce a
sub-profile similar to the one used by ar71xx.
These subprofiles provide a default implementation for most of the building
functions, while allowing each sub-profile to override any of these operations
in order to have
Some devices out there only have a NOR flash to store the rootfs on.
While using UBI is arguable on this kind of NAND, this is something that should
be supported.
Signed-off-by: Maxime Ripard
---
.../490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch | 5 +++--
.../490-ubi-auto-at
The mvebu image makefile define something almost identical to the generic
implementation found in include/image.mk.
Switch to this implementation.
Signed-off-by: Maxime Ripard
---
target/linux/mvebu/image/Makefile | 9 +++--
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/targ
The mvebu image Makefile directly calls the padjffs2 utility, while there's an
generic make function to do just that. Switch to it
Signed-off-by: Maxime Ripard
---
target/linux/mvebu/image/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/mvebu/image/Makef
Hi,
I am experimenting with OpenWRT Attitude Adjustment on NETGEAR WNDR3800. I
accidentally wrote wrong network configuration file and committed it. Now I
cannot interact with the router anymore. The wifi is still being created but
there is no Internet. I tried to SSH into the router from devic
I put it on the TODO list.
Thanks for feedback
Christian
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
On 13 January 2015 at 12:49, Jo-Philipp Wich wrote:
> Hi,
>
> thank you for the patch.
>
> Since there already is a generic free further down I decided to move the
> offending code blocks into the else clause wich sets valid = true, see
> http://nbd.name/gitweb.cgi?p=firewall3.git;a=commit;h=adf87
> There is just one thing I still have to check: return back to original
> firmware and see if you can upload the factory image in the firmware
> upgrade toolbox and it pass the hwid/verid checks. I think yes since
> I used the same values as found in the stock firmware. I will update you
> in a co
Hi Catalin,
there might be a change somewhere in the past inside netifd.
When I started creating the scripts I tested with the old scripts and had seen
that when the scripts try to detect local IP from the "wan" that it fails
because no data available.
from my point of view 10 seconds to wait b
Hi,
thank you for the patch.
Since there already is a generic free further down I decided to move the
offending code blocks into the else clause wich sets valid = true, see
http://nbd.name/gitweb.cgi?p=firewall3.git;a=commit;h=adf87f3a36328b949ed777068b14d975b429f9ad
~ Jow
__
A segmentation fault is currently possible when redir->_src is null and later
the check on redir->_src->masq is done in the line:
if (redir->reflection && redir->_dest && redir->_src->masq)
Proposed fix: continue immediately when redir->_src is null.
---
redirects.c |4
1 file changed, 4
hello everybody,
I'm happy to write you my first patch to add support for a new device.
I started from the support for WR703N as template and corrected
the gpio leds and buttons. I remove a couple of command the take
online the USB power (I think is not needed since no USB port is available
and I
Hi,
a good solution would be to look what placeholders are used in the
service url template and check if those are all set. So if the url has
no [USERNAME] then option username is not checked either.
Granted, it is a bit harder to implement but would match the
expectations of the common user I gu
25 matches
Mail list logo
