python-smbus/serial depends still on python-mini
python and python-mini is missing.
?
Am Fri, 24 Oct 2014 12:10:32 +0300
schrieb Alexandru Ardelean :
> python-mini is now just python.
>
>
>
> On Fri, Oct 24, 2014 at 12:06 PM, Claudio Thomas
> wrote:
>
> > Hi,
> > "python-mini" is miss
Using a redirect to a non-empty mtd partition will not erase the
blocks prior to writing to them resulting in broken dsl_fw.
Fix this by piping to mtd write - /dev/mtdX instead.
Signed-off-by: Daniel Golle
---
package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh | 2 +-
1 file changed, 1 ins
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
The wiki says [0] that for Ubnt NS Loco M5 (build in the year 2014)
someone has to use the **xw** firmware like
*openwrt-ar71xx-generic-ubnt-nano-m-xw-squashfs-factory.bin*.
But this do not work for my model with "Test date: 01/24/14", which
came
On Thu, Oct 30, 2014 at 11:04:17PM +0200, Roman Yeryomin wrote:
> On 30 October 2014 16:20, Mingyu Li wrote:
> > i checkout the latest code and rebuild for rt-n15
> > only test 3 times lan to wan tcp performance 60 seconds one thread
> >
> > netperf version 2.6.0
> > 116.33, 116.20, 102.84 (10^6bi
okay:
config interface 'wan'
option ifname 'wwan0'
option proto 'ncm'
option apn 'opengate'
option device '/dev/cdc-wdm0'
Thu Oct 30 21:06:18 2014 daemon.notice netifd: wan (2446): comgt
21:06:18 -> -- Error Report --
Thu Oct 30 21:06:18 2014 daemon.notice netifd:
Am 30.10.2014 um 07:22 schrieb Heiner Kallweit:
> Am 30.10.2014 um 03:36 schrieb Florian Fainelli:
>> Le 28/10/2014 11:46, Heiner Kallweit a écrit :
>>> After a little more thinking about it and looking at the code I basically
>>> have two questions:
>>>
>>> 1.
>>> Is it actually needed to exclude
On 30 October 2014 16:20, Mingyu Li wrote:
> i checkout the latest code and rebuild for rt-n15
> only test 3 times lan to wan tcp performance 60 seconds one thread
>
> netperf version 2.6.0
> 116.33, 116.20, 102.84 (10^6bits/sec)
>
> iperf 2.0.5
> 120, 116, 113 (Mbits/sec)
>
> iperf 3.0.7
> 113, 1
Hi,
While Running tests in an openwrt based IP gateway, we noticed a dns problem
running openwrt in a gateway.
When DNS proxy ( dnsmasq) forward the DNS reply, the Answer of section was
extracted.
Please refer to the following tests for the problem description.
192.168.42.135 -
i checkout the latest code and rebuild for rt-n15
only test 3 times lan to wan tcp performance 60 seconds one thread
netperf version 2.6.0
116.33, 116.20, 102.84 (10^6bits/sec)
iperf 2.0.5
120, 116, 113 (Mbits/sec)
iperf 3.0.7
113, 124, 121 (Mbits/sec)
2014-10-30 18:35 GMT+08:00 Paul Fertser :
Merged with some modifications.
Thanks.
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
On 30 October 2014 13:56, Stephen G. Parry wrote:
> I presume this will need to be a patch that creates a numbered patch in
> either:
> target/linux/generic/patches-3.14
> or:
> target/linux/brcm47xx/patches-3.14
> Any guidance please on which and what number to use?
You can use "generic"
I presume this will need to be a patch that creates a numbered patch in
either:
target/linux/generic/patches-3.14
or:
target/linux/brcm47xx/patches-3.14
Any guidance please on which and what number to use?
Is the patch you sent me a patch against 3.18?
Thanks
Stephen
On 29/10/14 17:42, R
mtd fixtrk now finds the correct partition but unfortunately in my setup
(no rootfs and no lzma-loader) it now bricks my router. I will try and
find a cure and post a patch.
Stephen Parry
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
http
Hi John,
thanks for the straight answers.
Interpreting what you just wrote and what I already see from a technical
point of view, I get the following picture:
The VDSL firmware blob needs to match the driver as Lantiq apparently
got several variants depending on who is using it downstream.
Proba
Hi Sami,
Using John's version:
config interface 'wan'
option proto 'wwan'
option apn 'opengate'
# option device '/dev/cdc-wdm0' (with or without commenting this)
Does absolutely nothing, nothing in logread...
However now when using
config interface 'wan'
opti
John Crispin writes:
>> I have RT5350 for testing (Hame MPR-A1), not MT7620/MT7530, I'm not
>> sure if the same codepath is used, but it looks like not? I will
>> probably be able to do whatever testing you need over the weekend.
>>
>
> ok, so on rt5350 tcp fails if vlans are disbaled ?
As far
On Wed, Oct 29, 2014 at 01:49:13PM +0100, Rafał Miłecki wrote:
> > Well, I don't think it was public enough then. The 3.16 patches have
> > been around for quite some time, some people actually tested it, sent
> > some feedbacks, we fixed some issues, before getting it merged.
> >
> > I don't think
On 30/10/2014 11:00, Roman Yeryomin wrote:
> On 30 October 2014 04:01, Mingyu Li wrote:
>> on rt2880 i also use rt-n15. the performance on rt2880 seeks unstable.
>> sometime low. sometime high. i also don't know why.
>> others target are more stable. so the maximum is 12x i got.
>> by datasheet
On 30 October 2014 04:01, Mingyu Li wrote:
> on rt2880 i also use rt-n15. the performance on rt2880 seeks unstable.
> sometime low. sometime high. i also don't know why.
> others target are more stable. so the maximum is 12x i got.
> by datasheet it support tx/rx checksum offload. but ralink sdk d
On 30/10/2014 10:38, Paul Fertser wrote:
> John Crispin writes:
>> On 30/10/2014 08:49, Paul Fertser wrote:
>>>
>>> Thanks to everybody involved! Does this also solve the issue
>>> discussed at [1] with TCP connections failing when VLAN is
>>> disabled?
>>>
>>> [1]
>>> https://www.mail-archive
John Crispin writes:
> On 30/10/2014 08:49, Paul Fertser wrote:
>>
>> Thanks to everybody involved! Does this also solve the issue discussed
>> at [1] with TCP connections failing when VLAN is disabled?
>>
>> [1]
>> https://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg19870.html
>>
I had to use a VDSL-only tone-setup to get show-time.
Handle this in uci by checking if annex is unset.
Signed-off-by: Daniel Golle
---
package/network/config/ltq-vdsl-app/files/dsl_control | 10 --
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/package/network/config/ltq-
On 30/10/2014 08:49, Paul Fertser wrote:
> Hey,
>
> Thanks to everybody involved! Does this also solve the issue discussed
> at [1] with TCP connections failing when VLAN is disabled?
>
> [1] https://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg19870.html
>
probably this bugfix ->
Hey,
Thanks to everybody involved! Does this also solve the issue discussed
at [1] with TCP connections failing when VLAN is disabled?
[1] https://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg19870.html
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto
---
target/linux/lantiq/xrx200/profiles/arv.mk |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/target/linux/lantiq/xrx200/profiles/arv.mk
b/target/linux/lantiq/xrx200/profiles/arv.mk
index 821884c..9dd8daa 100644
--- a/target/linux/lantiq/xrx200/profiles/arv.mk
+++ b/ta
---
target/linux/lantiq/xrx200/profiles/arv.mk |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/target/linux/lantiq/xrx200/profiles/arv.mk
b/target/linux/lantiq/xrx200/profiles/arv.mk
index 821884c..9dd8daa 100644
--- a/target/linux/lantiq/xrx200/profiles/arv.mk
+++ b/ta
26 matches
Mail list logo
