On 26 August 2014 02:34, Stephen Parry wrote:
> 1. About 9 months ago I built a trx using trunk that flashed and worked OK.
> 2. Two weeks ago I built a new image. This loaded and tested fine as ELF via
> tftp boot so I flashed the trx using MTD command. the resulting image hung
> after "starting
@John:
If you mean /sbin/ramfsinit, it doesn't exist until provided by a.n.other
package or by the developer under $ROOT/files - it's just a hook. I have an
example I wrote and tested that mounts external usb storage and switches root
but it isn't neccesarily up to fully generalised use.
If you
No sorry - I did not explain carefully enough:
1. About 9 months ago I built a trx using trunk that flashed and worked OK.
2. Two weeks ago I built a new image. This loaded and tested fine as ELF via
tftp boot so I flashed the trx using MTD command. the resulting image hung
after "starting progra
OK. seems to work...
driver loaded with out issue.
[1.03] rt3xxx-usbphy usbphy.3: loaded
[6.18] usbcore: registered new interface driver usbfs
[6.20] usbcore: registered new interface driver hub
[6.21] usbcore: registered new device driver usb
[6.27] ehci
Hmm, I just noticed that BB RC3 has enormus toolchain file for mips (the
one I use most often) [1] when compared to AA 12.09 toolchain [2]
40MB vs 160MB
Should I be worried that something is broken or is this quadruple size
increase planed?
[1]
http://downloads.openwrt.org/barrier_breaker/14.07
Hi Rafal,
just gave it a try on a Huawei E970: it didn't work, unfortunately (see
below).
Originally, this device ran into a reboot loop after "Starting program at
0x80001000" with lzma-loader. The device has a hardware watchdog set to
about 1 or 2 seconds, so I thought it may as well be the hang
Hi
the phy init was missing the bit for the ohci root port. i pushed a
patch to fix this, please retest.
John
On 22/08/2014 06:30, Luis Soltero wrote:
>
> Hello All,
>
> I has anything happened as far as the MT7620x OHCI USB driver
> issue? The last posted patch for this
>
> From ffb
RB2011UiAS-2HnD is quite exactly the same as RB2011UiAS, which is
already supported. The only difference is the integrated wifi (ar9344).
This patch enables vlan/led pre-configuration and wifi
integration/intialisation.
As already mentioned here (http://patchwork.openwrt.org/patch/5765/) and
here
From: L. D. Pinney
Sets the system LED on the EasyLink M150 and mini to lower-case "easylink"
Signed-off-by: L. D. Pinney
---
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
index 1864b11..faac4bd 100755
--- a/target/linux/ar71xx/base-fil
On 2014-08-25 11:24, John Crispin wrote:
>
> On 25/08/2014 11:14, Rafał Miłecki wrote:
>> On 17 August 2014 14:10, Rafał Miłecki wrote:
>>> There are pretty many OpenWrt patches against mtd subsystem resulting
>>> in a bit of mess and growing maintenance cost.
>>> My idea is to use an extra "mtds
On 25/08/2014 11:14, Rafał Miłecki wrote:
> On 17 August 2014 14:10, Rafał Miłecki wrote:
>> There are pretty many OpenWrt patches against mtd subsystem resulting
>> in a bit of mess and growing maintenance cost.
>> My idea is to use an extra "mtdsplit" directory with OpenWrt specific
>> files (i
On 17 August 2014 14:10, Rafał Miłecki wrote:
> There are pretty many OpenWrt patches against mtd subsystem resulting
> in a bit of mess and growing maintenance cost.
> My idea is to use an extra "mtdsplit" directory with OpenWrt specific
> files (including Kconfig).
> This is the first step to ac
On 25/08/2014 09:55, Yousong Zhou wrote:
> As I deem myself not yet equipped with the necessary knowledge of all
> three interface types of rt2x00 device, I should at this point say
> "no, I am not sure". It's based on the following observation.
same here, i don't know the 3 modes that well eithe
Hi, John
On 25 August 2014 14:24, John Crispin wrote:
> Hi,
>
> On 25/08/2014 05:29, Yousong Zhou wrote:
>> +-/* +-* Upload beacon to the H/W.
>> This is only required on
>> +- * USB devices. PCI devices fetch beacons
>> periodically.
Hi,
>> I agree that we want this enabled by default. i know that lantiq
>> will fail for its dsl drivers if we do so.
>>
>> i have taken the patch as is and will push in a sec. once BB
>> finals are out the door i will use the build machines to verify
>> that all packages build on all targets and
15 matches
Mail list logo
