It has been known for a long time that this is actually a really terrible idea:
http://sites.inka.de/~W1011/devel/tcp-tcp.html
It might appear to work just fine on completely uncongested links with zero
packet loss, but theory says that as soon as there is any congestion at all, it
will break h
This patch adds support for the MikroTik RouterBOARD SXT Lite.
The new RB911L series is also supported as a result.
Signed-off-by: Matthew Reeve
--- target/linux/ar71xx/patches-3.10/710-MIPS-ath79-add-RBSXTLite-support.patch
2014-05-12 18:49:06.902842033 +
+++ target/linux/ar71xx/patches-3
On Wed, Apr 23, 2014 at 4:09 PM, Owen Kirby wrote:
> This patch adds support for building the kernel modules for gadget serial
> devices.
>
> Signed-off-by: Owen Kirby
>
> ---
> package/kernel/linux/modules/usb.mk | 26 ++
> 1 file changed, 26 insertions(+)
>
> diff --
The chipidea USB OTG controller is dual-role and supports both host and device
modes. Enable device mode.
Tested on Gateworks Ventana imx6 board with g_ether.
Are there any other targets out there that use the CHIPIDEA controller? If so
testing is needed for those.
Signed-off-by: Tim Harvey
---
Fwiw, unfs3 works, even though it seems to be dead code, and has been removed
from most other desktop distros.
Any ideas on why the kernel version isn't working?
Sincerely,
Karl Palsson
On 05/20/2014 04:37 PM, Karl Palsson wrote:
I've tested this back with the intial pull point of AA and
The pps-gpio kernel module supports Pulse-Per-Second provided by a GPIO.
Signed-off-by: Tim Harvey
---
package/kernel/linux/modules/other.mk | 16
1 file changed, 16 insertions(+)
diff --git a/package/kernel/linux/modules/other.mk
b/package/kernel/linux/modules/other.mk
index
On UBI enabled devices, U-Boot might store it's environment on
UBI volume(s). Support this in uboot-envtools, so fw_setenv and
fw_printenv can work on these platforms.
Signed-off-by: Daniel Golle
---
package/boot/uboot-envtools/Config.in | 9 ++
package/boot/uboot-envtools/Makefil
Use InstallDev to make libubi-utils available for linking in
uboot-envtools.
Signed-off-by: Daniel Golle
---
package/system/fstools/Makefile | 9 -
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/package/system/fstools/Makefile b/package/system/fstools/Makefile
index 398f949
Dlink dir-615-e1 can use dir-600-a1's image, but the image can't be
uploaded through dlink's normal firmware update web page.
Add profile for dir-615-e1 so the generated image can be uploaded
through the firmware update web page.
Signed-off-by: Zhao, Gang
---
target/linux/ar71xx/base-files/etc/
Function service_kill is deprecated and has no user, so remove it.
Signed-off-by: Zhao, Gang
---
package/base-files/files/lib/functions/service.sh | 23 ---
1 file changed, 23 deletions(-)
diff --git a/package/base-files/files/lib/functions/service.sh
b/package/base-files/f
Macro Sysupgrade/KR is not used and seems unnecessary, so remove
it. Also add padding argument to macro Sysupgrade/RKuImage.
Signed-off-by: Zhao, Gang
---
target/linux/ar71xx/image/Makefile | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/target/linux/ar71xx/image/Makefile
* Bastian Bittorf [25.04.2014 15:51]:
> without this patch the build breaks at iptables
to make it a bit cleaer:
when trying to build without IPv6:
# CONFIG_IPV6 is not set
# CONFIG_PACKAGE_6relayd is not set
# CONFIG_PACKAGE_odhcp6c is not set
# CONFIG_PACKAGE_odhcpd is not set
# CONFIG_PACKAGE
Hi,
I have encountered an issue with multiple virtual ssid's that seems to be
happening across a few devices with different chipsets.
I have three virtual access points which are all showing as wifi
connections on my client devices.
1: After I boot the router I can connect to any of the three ac
13 matches
Mail list logo
