On 24/06/12 06:35, John Crispin wrote:
> On 23/06/12 22:56, Philip Prindeville wrote:
>> > Eglibc doesn't bundle librpc, therefore -lrpc must be passed through
>> > LDFLAGS.
>> >
>> > Alas, lsof doesn't take LDFLAGS out-of-the-box. Patch the Makefile to do
>> > so.
>> >
>> > Also, patch a prev
Hi,
i tested on a tplink 3020 which reboots directly after instering these
modules and a lantiq unit which segfaults when plugging the dongle
John
On 22/06/12 08:18, xian...@openmobilefree.net wrote:
> From: Xiangfu
>
> Hi
>
> Those 3 patches add support to IEEE802154 WPAN patches. I have te
On 23/06/12 22:56, Philip Prindeville wrote:
> Eglibc doesn't bundle librpc, therefore -lrpc must be passed through LDFLAGS.
>
> Alas, lsof doesn't take LDFLAGS out-of-the-box. Patch the Makefile to do so.
>
> Also, patch a previous patch which was broken... either use "test 0 -eq 1"
> (not mis
Hi!
>From what I can see, the udhcpc script currently doesn't support any way to not
set or override the default-gateway.
In some cases (here: I connect to an non-routed infrastructure using DHCP, then
use PPP-over-L2TP on top of it to get to the Internet) this would be feasible.
The scenario loo
Dear all,
It appears there is a small bug in the current version for DLink's
DIR-615-C1 mach: DIR615-C1 embedded http reflasher checks the size as
if the "art" partition were 128k (actually art is 64k). Thus upon
creation of *-factory.bin we need to subtract the 64k from the rootfs
size (thus, the
This integrates xl2tpd suppport into netifd, based on what I saw for ppp and
pptp.
I also changed the init script so that it makes sure that all modules needed for
kernel-mode l2tp support are loaded at the time that xl2tpd is started, as
otherwise xl2tpd falls back into using user-mode l2tp.
Sig
Building eglibc on x86 requires various packages explicitly call out librt.
Add these dependencies.
Signed-off-by: Philip Prindeville
Index: feeds/packages/devel/diffutils/Makefile
===
--- feeds/packages/devel/diffutils/Makefile
Eglibc doesn't bundle librpc, therefore -lrpc must be passed through LDFLAGS.
Alas, lsof doesn't take LDFLAGS out-of-the-box. Patch the Makefile to do so.
Also, patch a previous patch which was broken... either use "test 0 -eq 1" (not
missing 'test' command name) or simpler still, just use /bin
On 23/06/12 22:52, Tim Fletcher wrote:
> Confirmed working on my iConnect, flashed to NAND.
>
> uboot 2012.04.01 boots OpenWRT from NAND, I've also tested tftp and usb
> booting and they have worked.
>
> My notes about installing OpenWRT trunk on my iConnect can be found here:
>
> http://blog.n
On 08/06/12 02:32, Luka Perkov wrote:
Board owners please test this patch and give feedback for the boards:
* sheevaplug
* dockstar
* iconnect
You can use kwboot tool like this (run as root):
./bin/kirkwood/u-boot-kwboot/kwboot -b
bin/kirkwood/openwrt-kirkwood-ib62x0-u-boot.kwb -p /dev/
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)
Signed-off-by: Malte Forkel
Index: target/linux/ramips/base-files/etc/uci-defaults/leds
===
--- target/linux/ramips/base-files/etc/uci-defaults/leds
11 matches
Mail list logo
