Hi.
Selva find the problem!
After several stupid settings I was give the absolute path for clients,
add one more (quite obvious route to clients lan) everything is start
working.
Thanks a lot!
Sincerely
tovis
> On 24/02/16 16:24, tovis wrote:
>> Thanks for your answer!
>> On this (old 12.0.9 Op
Hi.
Problem was solved :)
Sleva you found it! - thank you.
After several stupid solutions, I have simply gave the absolute path for
clients. After restart and adding one more route (by hand)
route add -net 192.168.2.0 netmask 255.255.255.0 dev tun0
everything is get working. Now I will try figure o
On 24/02/16 16:24, tovis wrote:
> Thanks for your answer!
> On this (old 12.0.9 OpenWrt) /etc/config/openvpn contain only an include
> to real configuration file /etc/openvpn/srv-vpn.conf
> I this directory are also keys (such as ca.crt, ca.key, server.crt etc.)
> Location of ccd is now /etc/openvp
On Wed, Feb 24, 2016 at 10:24 AM, tovis wrote:
> Thanks for your answer!
> On this (old 12.0.9 OpenWrt) /etc/config/openvpn contain only an include
> to real configuration file /etc/openvpn/srv-vpn.conf
> I this directory are also keys (such as ca.crt, ca.key, server.crt etc.)
>
ca cert etc are
Thanks for your answer!
On this (old 12.0.9 OpenWrt) /etc/config/openvpn contain only an include
to real configuration file /etc/openvpn/srv-vpn.conf
I this directory are also keys (such as ca.crt, ca.key, server.crt etc.)
Location of ccd is now /etc/openvpn/ccd/tovis-lak and server (seem to me)
co
Hi,
On Wed, Feb 24, 2016 at 5:48 AM, tovis wrote:
> Hi.
> Thanks for answer!
> At now I have use loglevel 5 (several time I was used level 9 but it was
> useless - too many information).
> I'm trying to find reading iroute from ccd directory but I do not find it
> or is it not so obvious, do you
Hi.
Thanks for your answer!
Yes, at now I have only one client, but it could change sometimes, that
why I have decided to use multiple client configuration.
At now I think the best clue is that may ccd directory does not read at
all, I should check this - in server log I can not find this message.
Hi.
Thanks for answer!
At now I have use loglevel 5 (several time I was used level 9 but it was
useless - too many information).
I'm trying to find reading iroute from ccd directory but I do not find it
or is it not so obvious, do you have a more precise form of this message?
(I found the PUSH_REQU
Hi,
On Wed, Feb 24, 2016 at 12:06:24AM -0500, Selva Nair wrote:
> Having said that, if the idea is to make a tunnel between two routers its
> much simpler to use a point-to-point set up:
[..]
> Then use up scripts to add routes:
> On router 1 a route to server side LAN with gateway as router 2 tun
On Tue, Feb 23, 2016 at 7:07 PM, tovis wrote:
> The routers configuration, resulting settings and logs are on pastebin:
> server side (tovis-lab): http://pastebin.com/3VRAadXz
> client side (tovis-lak): http://pastebin.com/h8Ctfmx2
> server side LAN is 192.168.1.0 255.255.255.0 tunnel is 10.8.0.1
Hello everyone!
Several days I'm struggling on build a site-to-site configuration, using
two TP-LINK TL-WR1043ND ver:1.8 routers:
http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd
I have installed "Attitude adjustment" 12.09 with 2.2.2 OpenVpn.
I know these are quite old, but have less memory foot pr
11 matches
Mail list logo
