Re: [Openstack] Help with ipv6 self-service and ip6tables rule on mangle chain

Thank you so much Brian. I was not using "address scope". After your indication I've read about this feature working together with "subnet pool". However the official documentation is not so clear. For those looking for something else about usage of address scope and subnet pool, I recommend this

Re: [Openstack] Help with ipv6 self-service and ip6tables rule on mangle chain

On 08/23/2018 12:53 PM, Jorge Luiz Correa wrote: Hi all I'm deploying a Queens on Ubuntu 18.04 with one controller, one network controller e for now one compute node. I'm using ML2 with linuxbridge mechanism driver and a self-service type of network. This is is a dual stack environment (v4 an

[Openstack] Help with ipv6 self-service and ip6tables rule on mangle chain

Hi all I'm deploying a Queens on Ubuntu 18.04 with one controller, one network controller e for now one compute node. I'm using ML2 with linuxbridge mechanism driver and a self-service type of network. This is is a dual stack environment (v4 and v6). IPv4 is working fine, NATs oks and packets flo

Re: [Openstack] Help with hardcoded project_id query_filter in neutron when not admin

This isn't a direct answer to your question, but you can use service subnets to avoid the routers burning public IP addresses to make per-tenant routers feasible: https://docs.openstack.org/neutron/pike/admin/config-service-subnets.html As for enabling the shared router use case, I recommend filin

[Openstack] Help with hardcoded project_id query_filter in neutron when not admin

Hi! I got a problem with neutron-server, and I am not sure if I should consider it a bug, a platform limitation, or a future improvement. My scenario is that I want to allocate floating ips from project "admin" to project "project1". On project admin, I have an external network, and a router

Re: [Openstack] help

Douaa can you provide details on the error you are getting? Also I am adding the Operators ML as some more practitioners may be able to see it from there. On Mon, Apr 23, 2018 at 11:55 AM, Douaa wrote: > Hello > I'm trying to use openstack (VIM) on openbaton for that i create to VMs > one for Op

[Openstack] help

Hello I'm trying to use openstack (VIM) on openbaton for that i create to VMs one for OpenStack and the second for Opnebaton. i have installed packstack on CentOS and Openbaton on ubuntu 16.04. Now i'm trying to create VIM Openstack on openbaton but i have erreur there is any plugins or configurat

[Openstack] Help finding old (Mitaka) RDO RPMs

Hi All, Does anyone happen to have an archive of the MItaka RDO repo lying around they'd be willing to share with a poor unfortunate soul? My clone of it has gone AWOL and I have moderately desperate need of it. Thanks! Cheers, Erik ___ Mailing list:

[Openstack] Help with openstack-ansible load balancers settings

Hi, I need help with the internal_lb_vip_address/external_lb_vip_addresses. I've found several posts people asking for a clarification of the purpose and settings of that load balancers. One of the discussions pointed to https://github.com/openstack/openstack-ansible/blob/a46a72aa7838a3d500e8e3970

Re: [Openstack] Help needed to understand keystone

Content-Type: multipart/alternative; boundary="=_feea5127e39d341283587e513af8bc0d" --=_feea5127e39d341283587e513af8bc0d Content-Transfer-Encoding: base64 Content-Type: text/plain; charset=utf-8 SWYgeW91IHdhbnQgbW9yZSByb2xlcyB5b3UgbmVlZCB0byBjcmVhdGUgZG9tYWlucyBhbmQgc2V0 dXAgZGlmZmVyZW50IH

Re: [Openstack] Help needed to understand keystone

Hi Chengwei, You can create as much roles as you want and create/modify rules in policy.json (can be found in /etc/keystone and other configuration directories of Openstack modules) to put these roles into reality And there is no notion 'project admin'. Unfortunately, in Keystone everybody w

Re: [Openstack] help - Fuel Community 11 - PXE

e. > >   > >   > >   > > Regards, > >   > > /Ken Houle/ > 469-634-4171 : > kho...@developingsolutions.com<mailto:kho...@developingsolutions.com> > >   > > *From:* Evgeniy L [mailto:e...@mirantis.com] > *Sent:* Tuesday, October 31, 2017 9:

Re: [Openstack] help - Fuel Community 11 - PXE

ilto:e...@mirantis.com] Sent: Tuesday, October 31, 2017 9:58 AM To: Ken Houle Cc: Openstack Subject: Re: [Openstack] help - Fuel Community 11 - PXE I'm not sure if these options should be set, because they are required only if PXE server is on different host from DHCP server, which is not t

Re: [Openstack] help - Fuel Community 11 - PXE

Broadcast Address > > Option: (15) Domain Name > > Option: (6) Domain Name Server > > Option: (3) Router > > Option: (255) End > > Padding: 00 > > > > Regards, > > > > *Ken Houle* > 469-634-4171 : kho...@developingsolutions.com > &

Re: [Openstack] help - Fuel Community 11 - PXE

ctober 25, 2017 11:45 AM To: Ken Houle Cc: Openstack Subject: Re: [Openstack] help - Fuel Community 11 - PXE Hi Ken, Fuel uses Cobbler which uses DNSMasq to provide DHCP and PXE boot, if the issue is hardware specific, you can try to search if anybody else had such problems with DNSMa

Re: [Openstack] help - Fuel Community 11 - PXE

Hi Ken, Fuel uses Cobbler which uses DNSMasq to provide DHCP and PXE boot, if the issue is hardware specific, you can try to search if anybody else had such problems with DNSMasq PXE boot and similar hardware. Thanks, On Wed, Oct 25, 2017 at 7:12 AM, Ken Houle wrote: > All: > > > > First off n

[Openstack] help - Fuel Community 11 - PXE

All: First off not sure I am in the right place so if I am not please be kind and point me in the correct direction. I am attempting to build an Openstack system with Fuel Community 11 with a mix servers from different manufacturers. I have successfully installed Fuel Community 11 on the master

[Openstack] Help needed to understand keystone

Hi list, I'm recently learn keystone and got some questions below, thanks any reply in advance! 1. It seems that there are only 2 kinds of roles, regardless how many roles you created, all of them should be non-admin or admin, am I right? 2. If I was wrong, how to create a role with specific ca

Re: [Openstack] Help needed with migrating Fuel server

Hi, Try following this guide: https://docs.mirantis.com/openstack/fuel/fuel-7.0/operations.html#howto-backup-and-restore-fuel-master Thanks, On Sun, Sep 24, 2017 at 11:57 PM, Raja T Nair wrote: > Hello All, > > Can somebody help me with info on how to migrate OR backup/restore fuel > server to

[Openstack] Help needed with migrating Fuel server

Hello All, Can somebody help me with info on how to migrate OR backup/restore fuel server to another hardware? Fuel version - fuel-7.0.0-6122.1 We want to migrate fuel services to a new hardware. Many Thanks. Raja. -- :^) ___ Mailing list: http://lis

[Openstack] Help us grow The Women of OpenStack

Did you know the Women of OpenStack isn't just for people who identify as female, but allies as well? Well now you do and we're looking for new members! Our mission statement is: The Women of OpenStack (WOO) strive to increase the diversity of the OpenStack community by overcoming OpenStack's bar

[Openstack] Help with Networking - Ocata

Hi, I have been following this guide, https://docs.openstack.org/ocata/install-guide-rdo/launch-instance-networks-provider.html and got to a point where I have created the following subnet openstack subnet create --network provider --allocation-pool start=130.217.238.20,end=130.217.238.250 --dns-

Re: [Openstack] Help with openstack single node deployment

Hey Emily, You can use the OpenStack-Ansible AIO install potentially https://docs.openstack.org/developer/openstack-ansible/developer-docs/quickstart-aio.html https://docs.openstack.org/developer/openstack-ansible/mitaka/developer-docs/quickstart-aio.html On Fri, Mar 24, 2017 at 4:07 PM, Emily Bu

Re: [Openstack] Help with openstack single node deployment

On 2017-03-24 15:53:26 -0600 (-0600), Joe Topjian wrote: > I'm an absolute amateur at this -- no doubt OpenStack Infra has > better tools [...] We don't really have any jobs that operate in the described manner. Instead we test against Mitaka (or any OpenStack release) this way: 1. DevStack is ch

Re: [Openstack] Help with openstack single node deployment

I'm an absolute amateur at this -- no doubt OpenStack Infra has better tools -- but I have a suite of deployment configurations here: https://github.com/jtopjian/terraform-devstack The most up-to-date ones are the "packstack-standard" (which I'm now using Packer to create a standard image that la

[Openstack] Help with openstack single node deployment

Hi, I’m trying to set up an OpenStack development environment (Mitaka with LBaaS v2 and Keystone v3) to test against. I’m working on Spinnaker, an open source continuous delivery tool. We have a suite of continuous integration tests that we want to run against an Open

[Openstack] Help me L2TP (or something like it), your my only hope...

Anyone know if VPNaas for Openstack supports L2TP? or some form of Layer 2 extension technique? ___ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstac

Re: [Openstack] Help with non booting images (problem with root file system)

Hi George, thank you for helping. Now, it is working. Bellow the answers for the questions. I do not know what happened to fix the problem. I uploaded a new image in the VMDK format. So, that image worked. When I tried to boot the qcow2 again, it got work again. Very strange. Makes no sense. When

Re: [Openstack] Help with non booting images (problem with root file system)

Yes, I've tried with 0 (without define a minimum size) and with large sizes. Same error. Two things that I've noted: 1) When I create a volume based on the image, I can boot the system normally. But, when I try to launch the instance as ephemeral disk (without volume on storage), I get the error.

Re: [Openstack] Help with non booting images (problem with root file system)

Check if the flavour you chose has a large enough root disk. > On Jan 20, 2017, at 08:25, Jorge Luiz Correa wrote: > > Hi, I need some help with images that I can't boot. I've here some images > like Cirros, Ubuntu, Fedora, CentOS etc. All downloaded as indicated here: > > http://docs.openstac

[Openstack] Help with non booting images (problem with root file system)

Hi, I need some help with images that I can't boot. I've here some images like Cirros, Ubuntu, Fedora, CentOS etc. All downloaded as indicated here: http://docs.openstack.org/image-guide/obtain-images.html Some weeks ago they were working fine. But now, I can boot only Cirros image. Ubuntu, Fedor

[Openstack] Help with ipv6 and neutron-l3-agent.

Hi! I would like some help with a weird behavior on l3-agent of a network controller node. My scenario is on the figure attached. 1) Why l3-agent is assigning ipv6 addresses from internal tenant network on qg_ interfaces of virtual routers? When I built the environment these qg_ interfaces only h

[Openstack] Help: /var/log full cause Keystone service stop working

Hi, I don't know if the topic was dicussed before or should be discussed here. I installed Mirantis OS8 in my server and found that the keystone service stop working after a period of time running. After some study, I found this is because the /var/log is full. I tried manually remove some logs fo

Re: [Openstack] Help for replacing linux bridging with OpenVswitch

n I do the same with linuxbridge? El 2016-10-17 11:57, sinh@verizondigitalmedia.com escribió: > I'm curious as to why you're switching from linuxbridge to ovs. > > FROM: Jose Manuel Ferrer Mosteiro > SENT: Monday, October 17, 2016 2:55 AM > TO: openstack@lists.open

Re: [Openstack] Help for replacing linux bridging with OpenVswitch

I also like openvswitch. My configuration with mitaka ... in controller node: https://github.com/paradigmadigital/ansible-openstack-vcenter/blob/develop/etc_ansible/roles/networking-compute-controller/templates/ml2_conf.ini.j2 [1] https://github.com/paradigmadigital/ansible-openstack-vce

Re: [Openstack] Help for replacing linux bridging with OpenVswitch

I’m curious as to why you’re switching from linuxbridge to ovs. From: Jose Manuel Ferrer Mosteiro Sent: Monday, October 17, 2016 2:55 AM To: openstack@lists.openstack.org Subject: Re: [Openstack] Help for replacing linux bridging with OpenVswitch I also like openvswitch.         My

Re: [Openstack] Help for replacing linux bridging with OpenVswitch

Awaiting your response please! Can i use management interface as tunneling interface? Regards Gaurav Goyal On Thu, Oct 13, 2016 at 6:52 AM, Gaurav Goyal wrote: > Dear Team, > > I am working on liberty version of openstack environment. > > As per generic liberty openstack guide, i was using li

Re: [Openstack] Help with ipv6 route configuration and problem to traverse virtual router.

On 08/31/2016 07:00 AM, Jorge Luiz Correa wrote: *Chain neutron-l3-agent-scope (1 references)* pkts bytes target prot opt in out source destination 78 4368 *DROP* all * qr-1ee33f03-23 ::/0 ::/0 mark match !

Re: [Openstack] Help with ipv6 route configuration and problem to traverse virtual router.

> > *Chain neutron-l3-agent-scope (1 references)* >> pkts bytes target prot opt in out source >> destination >>78 4368 *DROP* all * qr-1ee33f03-23 ::/0 >> ::/0 mark match ! 0x400/0x >> >> Packets pass in chain FORWARD -> neutron-filter-

Re: [Openstack] Help: Openstack DVR floating ip No Port available

On Aug 31, 2016, at 2:46 AM, Satish Patel wrote: > I am so unhappy because without doing anything it just started > working. I don't know what happened :( I didn't touch any single file. > Very strange. Be extremely happy! With OS, that doesn't come easy :D OS is the most advanced and complex p

Re: [Openstack] Help: Openstack DVR floating ip No Port available

On Aug 30, 2016, at 9:52 PM, Satish Patel wrote: > 192.168.1.1 > 192.168.1.4 > > Does it normal? because before it was only showing single IP/Port, but > now it's adding two port in DVR router For me it is.. Is the other one the DHCP server perhaps? -- Michael Jackson is not going to buried or c

Re: [Openstack] Help: Openstack DVR floating ip No Port available

16 at 5:14 PM, Kaustubh Kelkar wrote: >> -Original Message- >> From: Satish Patel [mailto:satish@gmail.com] >> Sent: Tuesday, August 30, 2016 4:53 PM >> To: Kaustubh Kelkar >> Cc: Brian Haley ; openstack@lists.openstack.org >> Subject: Re: [Open

Re: [Openstack] Help: Openstack DVR floating ip No Port available

> -Original Message- > From: Satish Patel [mailto:satish@gmail.com] > Sent: Tuesday, August 30, 2016 4:53 PM > To: Kaustubh Kelkar > Cc: Brian Haley ; openstack@lists.openstack.org > Subject: Re: [Openstack] Help: Openstack DVR floating ip No Port available > &

Re: [Openstack] Help: Openstack DVR floating ip No Port available

6c | {"subnet_id": "39779618-bc92-4168-bc6d-839e294df8e3", "ip_address": "192.168.1.4"} | On Tue, Aug 30, 2016 at 4:07 PM, Kaustubh Kelkar wrote: >> -Original Message- >> From: Brian Haley [mailto:brian.ha...@hpe.com] >> Sent: Tues

Re: [Openstack] Help: Openstack DVR floating ip No Port available

> -Original Message- > From: Brian Haley [mailto:brian.ha...@hpe.com] > Sent: Tuesday, August 30, 2016 3:41 PM > To: openstack@lists.openstack.org > Subject: Re: [Openstack] Help: Openstack DVR floating ip No Port available > > On 08/30/2016 03:08 PM, Satish Patel w

Re: [Openstack] Help: Openstack DVR floating ip No Port available

Brian, I have looked at this document http://docs.openstack.org/liberty/networking-guide/scenario-dvr-ovs.html it's not showing any configuration related /etc/neutron/plugins/ml2/ml2_conf.ini file on Compute node but in my setup i copied that file from controller node to compute node is that cor

Re: [Openstack] Help: Openstack DVR floating ip No Port available

I have admin privilege and i setup my DVR configure correctly from those blog. also i checked offcial website and setup according. I have know you need to create VM to show up qrouter on Compute node. i have distributed = True set on router. [root@controller-1 neutron(keystone_admin)]# neutron r

Re: [Openstack] Help: Openstack DVR floating ip No Port available

On 08/30/2016 03:08 PM, Satish Patel wrote: Interesting, when i create V-Router then it suppose to appear on Compute node right but it doesn't. What could be wrong, Does mikata support DVR or it's something i am doing wrong [root@controller ~(keystone_admin)]# ip netns snat-99960b5a-b475-436a-a2

Re: [Openstack] Help with ipv6 route configuration and problem to traverse virtual router.

On 08/30/2016 02:53 PM, Jorge Luiz Correa wrote: Thank you Tomas and Brian! Here they are (just replace my ipv6 prefix with 2001:DB8). But, I think the problem is with firewall rules (see bellow). root@dataexp-network:/# ip netns exec qrouter-eb42f197-8969-4744-b226-49653ed2bf48 ip -6 route

Re: [Openstack] Help: Openstack DVR floating ip No Port available

Holy crap!! look like its bug https://bugs.launchpad.net/neutron/+bug/1411883 Does it hurting CentOS7? I am using Mitaka on CentOS7 3.10.0-327.28.3.el7.x86_64 #1 SMP On Tue, Aug 30, 2016 at 3:08 PM, Satish Patel wrote: > Interesting, when i create V-Router then it suppose to appear on > Comput

Re: [Openstack] Help: Openstack DVR floating ip No Port available

Interesting, when i create V-Router then it suppose to appear on Compute node right but it doesn't. What could be wrong, Does mikata support DVR or it's something i am doing wrong [root@controller ~(keystone_admin)]# ip netns snat-99960b5a-b475-436a-a284-7239546fb91b qrouter-99960b5a-b475-436a-a28

Re: [Openstack] Help with ipv6 route configuration and problem to traverse virtual router.

ld be nice to see the interfaces of configured on > your Virtual Router and its routing table. > > Tomas > > > > *From:* Jorge Luiz Correa [mailto:corre...@gmail.com] > *Sent:* Tuesday, August 30, 2016 3:55 PM > *To:* openstack@lists.openstack.org > *Subject:* [Openstack] H

[Openstack] Help: Openstack DVR floating ip No Port available

I have 3 node in openstack (Mikata), everything was working fine in Legacy neutron networking. 1. Controller (network) 2. Compute1 3. Compute2 Today i have migrate it from Legacy to DVR networking to increase performance. I following this document http://egonzalez.org/configure-neutron-dvr-openst

Re: [Openstack] Help with ipv6 route configuration and problem to traverse virtual router.

On 08/30/2016 09:54 AM, Jorge Luiz Correa wrote: Hi! I need some help to understand and configure my network node to provide network access using a dual stack configuration. I've a scenario with one controller, one network node and a lot of compute nodes. The version is Mitaka on Ubuntu 16.04 LTS

[Openstack] Help with ipv6 route configuration and problem to traverse virtual router.

Hi! I need some help to understand and configure my network node to provide network access using a dual stack configuration. I've a scenario with one controller, one network node and a lot of compute nodes. The version is Mitaka on Ubuntu 16.04 LTS, Kernel 4.4.0-36. The IPv4 is working fine. Insta

[Openstack] - Help required for configured GBP in Openstack Kilo

Hello Team, I have an Openstack Kilo three node setup. It has one controller, one compute and one neutron node. I am using OVS switch as soft switch between compute and neutron nodes. Now, I need GBP to be configured on this existing Openstack. All the documents that I could find have only exp

[Openstack] -Help required for configuring GBP in Openstack Kilo

Hello Team, I have an Openstack Kilo three node setup. It has one controller, one compute and one neutron node. I am using OVS switch as soft switch between compute and neutron nodes. Now, I need GBP to be configured on this existing Openstack. All the documents that I could find have only exp

Re: [Openstack] Help with Openstack Liberty: Failed to allocate the network

You need to make a few changes in nova.conf but you are running liberty right? Not mitaka! So therefore, your error maybe diff, how many nodes are you running? Thanks > On Apr 27, 2016, at 16:01, The O.G. wrote: > > Remo & other OpenStack: > > I've been looking into this more today and noti

Re: [Openstack] Help with Openstack Liberty: Failed to allocate the network

Remo & other OpenStack: I've been looking into this more today and noticed this WARNING message from the nova-compute.log (compute node): 2016-04-27 15:39:39.191 856 WARNING oslo_config.cfg [-] Option "username" from group "neutron" is deprecated. Use option "user-name" from group "neutron". Th

Re: [Openstack] Help with Openstack Liberty: Failed to allocate the network

contact me offline … > On Apr 27, 2016, at 15:56, The O.G. wrote: > > Yes, this is on both controller and compute node. > > On Wed, Apr 27, 2016 at 3:41 PM, Remo Mattei > wrote: > is this on the controller and computes? >> On Apr 27, 2016, at 15:40, The O.G. >

Re: [Openstack] Help with Openstack Liberty: Failed to allocate the network

To be more specific, SELinux is enabled, but in permissive mode: # sestatus SELinux status: enabled SELinuxfs mount:/sys/fs/selinux SELinux root directory: /etc/selinux Loaded policy name: targeted Current mode: permissive Mode

Re: [Openstack] Help with Openstack Liberty: Failed to allocate the network

On Wed, Apr 27, 2016 at 3:34 PM, Remo Mattei wrote: > are you running SELinux? > sestatus on all of them and let me know. > > yes, SELinux enabled on all systems. are you suggesting I try with SELinux disabled? (I can do that...) thanks... Remo > > On Apr 27, 2016, at 15:23, The O.G. wrote: >

Re: [Openstack] Help with Openstack Liberty: Failed to allocate the network

Yes, this is on both controller and compute node. On Wed, Apr 27, 2016 at 3:41 PM, Remo Mattei wrote: > is this on the controller and computes? > > On Apr 27, 2016, at 15:40, The O.G. wrote: > > To be more specific, SELinux is enabled, but in permissive mode: > > # sestatus > SELinux status:

Re: [Openstack] Help with Openstack Liberty: Failed to allocate the network

is this on the controller and computes? > On Apr 27, 2016, at 15:40, The O.G. wrote: > > To be more specific, SELinux is enabled, but in permissive mode: > > # sestatus > SELinux status: enabled > SELinuxfs mount:/sys/fs/selinux > SELinux root directory:

Re: [Openstack] Help with Openstack Liberty: Failed to allocate the network

Hi Remo, On Thu, Apr 21, 2016 at 7:00 AM, Remo Mattei wrote: > has this been a new installation or an upgrade? > This is a brand new installation of Openstack/Liberty on CentOS7 > Not sure what you mean with option 2 since the install guide does not say > anything about options. > If you s

Re: [Openstack] Help with Openstack Liberty: Failed to allocate the network

are you running SELinux? sestatus on all of them and let me know. Remo > On Apr 27, 2016, at 15:23, The O.G. wrote: > > Hi Remo, > > On Thu, Apr 21, 2016 at 7:00 AM, Remo Mattei > wrote: > has this been a new installation or an upgrade? > > This is a brand new instal

Re: [Openstack] Help with Openstack Liberty: Failed to allocate the network

has this been a new installation or an upgrade? Not sure what you mean with option 2 since the install guide does not say anything about options. did you check if rabbit is up? did you check and see if the services are all good did you check and see if the agents are happy? just a few things t

[Openstack] Help with Openstack Liberty: Failed to allocate the network

We are following: http://docs.openstack.org/liberty/install-guide-rdo/index.html Using CentOS7. We've chosen the option 2 for networking, where we have both a private and public network. We've pretty much following the guide step by step up to and finishing "Add the dashboard" step. All the verif

Re: [Openstack] Help configuring multipath with IBM storwize v3700.

nstack admin in > nova.conf under libvirt section manually . > > Hope you can success > Pls inform me > Regards > VM > > From: Jorge Luiz Correa > Date: Wednesday 30 March 2016 at 21:18 > To: > Subject: [Openstack] Help configuring multipath with IBM storwize v3700. >

Re: [Openstack] Help configuring multipath with IBM storwize v3700.

ipath.html , looks like after Juno it should be configured by openstack admin in nova.conf under libvirt section manually . Hope you can success Pls inform me Regards VM From: Jorge Luiz Correa Date: Wednesday 30 March 2016 at 21:18 To: Subject: [Openstack] Help configuring multipath with IBM

[Openstack] Help configuring multipath with IBM storwize v3700.

Hi! I would like to get some help configuring my compute nodes to use multipath when establishing iscsi connections with a IBM Storwize v3700 storage. I have 1 controller, 1 network node and 2 compute nodes. The IBM Storwize driver is configured on controller and volumes can be created and attache

Re: [Openstack] [Help-Ask]creating a Cinder volume problem --> volume status is stuck in creating status......

디케이 writes: > > > Hello, I have a problem about cinder volume, > After cinder create command, new volume status is stuck in creating status. is not changed to available or error.. > What part of service should I focous on ???..   lvm? rabbit? cinder-api? cinder-volume? cinder-scheduler

[Openstack] [Help-Ask]creating a Cinder volume problem --> volume status is stuck in creating status......

Hello, I have a problem about cinder volume, After cinder create command, new volume status is stuck in creating status. is not changed to available or error.. What part of service should I focous on ???.. lvm? rabbit? cinder-api? cinder-volume? cinder-scheduler? etc... I'm writing to

Re: [Openstack] help openvswitch network configuration problems

Hi, In your screen shot I see the IP is still on eth2 port. When you add the eth2 to br-ex OVS bridge, you need to move the IP of eth2 to br-ex for the connectivity to work. Regards, Akash From: "applyhhj" To: "openstack" Date: 09/16/2015 07:43 AM Subject:

Re: [Openstack] help!

On 09/10/2015 08:38 PM, Heidi Bretz wrote: Unsubscribe :http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Heidi, you have to do this on your own by visiting the above URL. Christian. -- Christian Berendt Cloud Solution Architect Mail: bere...@b1-systems.de B1 Systems GmbH Osterfe

[Openstack] help!

Please unsubscribe me -Original Message- From: openstack-requ...@lists.openstack.org [mailto:openstack-requ...@lists.openstack.org] Sent: Wednesday, September 09, 2015 5:00 AM To: openstack@lists.openstack.org Subject: Openstack Digest, Vol 27, Issue 8 Send Openstack mailing list submiss

[Openstack] Help! Attaching floating IP breaks instance networking

Hi all, I've been running an OpenStack cluster without problems for a while, using the Kilo release and Distributed Virtual Routing. The instance networking broke all of a sudden and I can't figure out why or how to fix it. Any help would be greatly appreciated! An instance without a Floating IP

Re: [Openstack] Help regarding making multiple concurrent compute requests.

, July 15, 2015 at 9:27 AM To: "Uszov, Márk" mailto:m...@roico.net>> Cc: "openstack@lists.openstack.org<mailto:openstack@lists.openstack.org>" mailto:openstack@lists.openstack.org>> Subject: Re: [Openstack] Help regarding making multiple concurrent compute requ

Re: [Openstack] Help regarding making multiple concurrent compute requests.

Hi Mark, Sorry, I should have framed my question better. What I'm trying to look for here is a way in which I can make requests for multiple instances at a given instant of time. basically what I'm trying to find here is if the nova-api gets multiple requests with the same time how does it handle

[Openstack] Help regarding making multiple concurrent compute requests.

Hi, I am Dhvanan and I and am new to OpenStack, I wanted to know if there is a way to make multiple concurrent compute requests through the nova-api. It would be great if someone would help me out with this! Cheers, Dhvanan ___ Mailing list: http://lists

Re: [Openstack] Help with multiple external network in openstack

Hi James, Thanks a lot for explaing everything from basic level. I will surely help us to understand the working. Everything seems working now. I will kepp i touch with you. On Sat, Jun 6, 2015 at 5:43 AM, James Denton wrote: > Hi Geo, > > When configuring multiple provider bridges, try to

Re: [Openstack] Help with multiple external network in openstack

Hi Geo, When configuring multiple provider bridges, try to think of a 1:1 relationship between a provider bridge and a physical interface on the host that connects to a particular switching layer (in many cases). For example: br-eth0 is a bridge containing eth0. Eth0 connects to a switching in

Re: [Openstack] Help with multiple external network in openstack

Kevin, Thanks for the reply. Have added these names of external network in any other configurations On Fri, Jun 5, 2015 at 4:18 AM, Fox, Kevin M wrote: > Those are the 4 external networks. In this cloud, they are all linux > bridges. > > I'm not using vlan tagging on this cloud, so I'm not su

Re: [Openstack] Help with multiple external network in openstack

Kevin, Thanks. Can you please explain these values pub:br-pub,scz:br-scz,osg:br-osg,mgmt:br-mgmt These 4 networks are external networks? How you created these bridges. Can you please specify the value added for network_vlan_ranges = Are you using vlan tag fro external network. Sorry for many

Re: [Openstack] Help with multiple external network in openstack

Thanks for the reply Kevin. Currently bridge mapping is empty string. As I am not creating br-ex bridge due to multiple external network. Can you please explain what i have to do. On Thursday, June 4, 2015, Fox, Kevin M wrote: > Bridge mappings set in plugin.ini? > > Thanks, > Kevin > > -

[Openstack] Help with multiple external network in openstack

Hi Team, I need some help to setup multiple external network In normal single external network we create *br-ex* bridge and add it in /etc/neutron/l3_agent.ini As external_network_bridge = br-ex It is working for me. But in the case of multiple external network, this variable to be set to e

Re: [Openstack] Help regarding Swift Tese cases

Sounds like what you're looking for are Swift's probe tests. These take a cluster of a known configuration and test that the cluster components work together as expected. eg PUT some data, delete one replica, run replication, and ensure that the missing replica is restored. The auditors and rep

[Openstack] help nova-manage db sync return oslo.messaging.transport.DriverLoadFailure

*Hi,** **i am trying this guide : http://docs.openstack.org/openstack-ops/content/upgrades_havana-icehouse-ubuntu.html** **theres no error while processing glance and keystone, but not for nova, ** **running : nova-manage db sync** **returning :* Traceback (most recent call last): File "/usr/b

Re: [Openstack] Help regarding Swift Tese cases

Hi John, Thanks a lot for such a quick response, will get back to you in case of any future query. Thanks Saurav Suman On Mon, Feb 9, 2015 at 8:44 PM, John Dickinson wrote: > You can test Swift functionality with Swift's included functional tests. > > In the Swift source tree, you can run th

Re: [Openstack] Help regarding Swift Tese cases

You can test Swift functionality with Swift's included functional tests. In the Swift source tree, you can run the .functests script (https://github.com/openstack/swift/blob/master/.functests). This will look for /etc/swift/test.conf (sample at https://github.com/openstack/swift/blob/master/tes

[Openstack] Help regarding Swift Tese cases

Hi All, I am planning to implement cloud storage using openstack swift. Now to test the swift functionality,as far as I know, there is only one test case related to swift *test_swift_basic_ops.py* present at the path *openstack/tempest/tree/master/tempest/scenario .* I was wondering if there ar

[Openstack] Help needed to resolve "ImportError: No module named urllib"

Hello All, We are trying to integrate openstack with java. While doing so we are facing "ImportError: No module named urllib" When we import from python console it works fine. However when we are trying to import using jython 2.7 interpreter we get the below error. Caused by: Traceback (most

Re: [Openstack] Help on "configuring the Openstack setup with SAS Block storage"

Your file system needs to support live migration as well Inviato da iPhone () > Il giorno 23/set/2014, alle ore 12:39, Anne Hill ha > scritto: > > > Dear Members; Im stuck with following question. Appreciate your responses. > > > I have a SAS block storage and needed to configure with Liv

[Openstack] Help on "configuring the Openstack setup with SAS Block storage"

Dear Members; Im stuck with following question. Appreciate your responses. I have a SAS block storage and needed to configure with Live migration. All controller and computes nodes connected to the block storage through SAS interfaces. In order to enable live migration, If i create a single SAS

Re: [Openstack] Help regarding communication error while accessing images from openstack dashboard

Hi, After rebooting your machine, did you run ./stack.sh again? From: 11msccssbas...@seecs.edu.pk Date: Wed, 10 Sep 2014 12:22:41 +0500 To: openstack@lists.openstack.org Subject: [Openstack] Help regarding communication error while accessing images from openstack dashboard Hi everyone, After

[Openstack] Help regarding communication error while accessing images from openstack dashboard

Hi everyone, After completing openstack installation from the link: http://devstack.org/ I was able to access images list from openstack dashboard but after I restarted my machine I am getting following error: CommunicationError at /admin/images/images/CommunicationError at /admin/images/images/

Re: [Openstack] Help regarding openstack dashboard

Hi Sadia, Both your config files are wrong. For example, the section "sql_connection = mysql://root:seecs@127.0.0.1/nova?charset=utf8" in nova.conf is present under the [DEFAULT] section, but it's supposed to be under the [database] section and in keystone.conf, it's missing!!! Kindly change bo

Re: [Openstack] Help regarding openstack dashboard

Hello Nithish, Thank you for your reply, I found nova.conf in /etc/nove and keystone.conf in /etc/keystone. Pls see attached. I found these two files different from what you have told me. Should I change these files accordingly in order to make things work? On Wed, Sep 3, 2014 at 2:36 PM, nithis

Re: [Openstack] Help regarding openstack dashboard

Hi Sadia, If you cannot find nova.conf and keystone.conf in your system, do the following: 1. Copy the following to a file. NOVA_CONF=/etc/nova/nova.conf KEYSTONE_CONF=/etc/keystone/keystone.conf cp ${NOVA_CONF}{,.bak} cat > ${NOVA_CONF}

Re: [Openstack] Help regarding openstack dashboard

Got the files there in /etc/nova/api-paste-ini but got no following sections there: [pipeline:openstackapi10] # pipeline = faultwrap noauth ratelimit osapiapp10 # NOTE(vish): use the following pipeline for deprecated auth #pipeline = faultwrap auth ratelimit osapiapp10 [pipeline:openstackapi11]

  1   2   >