Hi,
Thanks for the replies. I'm setting up openstack primarily for
educational purposes and so am open to experimenting. As I couldn't get the
dashboard running with the ubuntu packages, I opted for devstack. I'm
really impressed with it so far. Instances on the compute nodes weren't
getting me
Hello Guys, I'm testing a dual node installation of OpenStack Nova with
Glance, and i really hope someone can help me with my current problem.
My setup is like that:
- First Node : All nova components plus Glance
- Second Node : nova-compute
I'm using diablo version that was installed from the u
Hi All,
I encountered a problem configuring the cloud controller of Openstack Nova
(Diablo release) on Ubuntu 11.10 x64 server. I've already done 'source
novarc', the commands 'euca-describe-availability-zones verbose' and
'euca-describe-instances' works just fine, but 'euca-describe-images'
cann
Hello there,
I've had some difficulties getting tests to pass in keystone on python 2.6
since some commits on December 23:
https://review.openstack.org/#change,2504
I'm still a bit new to the differences between python 2.6 and 2.7, but I tried
running the tests on a few different platforms a
I am not sure why, but
"sharing the same Network Interface means these three subnets share the
same range. Using the same subnet for Management and Storage network is
common place and should not be an issue, but sharing the Public network
subnet can be tricky."
http://blog.stackops.com/2011/06/13/
Hi Chang -
I've seen this also as have these guys:
https://answers.launchpad.net/nova/+question/179016
If you set --use_deprecated_auth in nova.conf to true it may work however I
also looked through the bugs to see if it has been reported and couldn't
find it, so perhaps this is fixed in trunk?
A
Hi!
You need to remove the %tenant_id% part from the Glance URI endpoint templates.
Cheers,
-jay
On Thu, Dec 22, 2011 at 6:28 AM, denmat wrote:
> Hi all,
>
> I'm trying to launch an instance via the dashboard with the admin
> account. (I have been following:
> http://keystone.openstack.org/conf
Hey dude :)Remember my doc.In fact the main issue is not about the database state... it's about the ISCSI session that is lost after the node reboots.Check out my drp script. It does handle that for you : https://github.com/Razique/BashStuff/blob/master/SYSTEMS/OpenStack/SCR_5006_V00_NUAC-OPENSTACK
-- Forwarded message --
From: Roman Sokolkov
Date: 2011/12/28
Subject: Re: [Openstack] reconnecting to RabbitMQ
To: Ask Solem
Hi!
I tried to make Rabbit HA for Openstack.
My first e-mail was little innacurate.
I use two nodes with active/active rabbits with mirrored queues.
A
I have submitted additions to nova/volume/san.py to add support for
SolidFire iSCSI devices. I'm still learning the process so please be
patient if I went about this incorrectly. I followed the docs to utilize
the gerrit review system.
https://blueprints.launchpad.net/nova/+spec/solidfire-san-is
Hi guys,
Im facing this error http://pastebin.com/8X3j4g8e it seems like nova
compute cannot redeclare the queue
I tried :
rabbmitmqctl app-stop; rabbmitmqctl reset; rabbmitmqctl app-start
and
deleting the quees with amqp ruby utils
Restaring nova-compute and libvirt, still getting the same
Thanks for explaining it.
I read the source code and confirmed that read operations incur more
drop_cache calls than write operations. However, I am not sure
whether the additional calls result in significant overhead. Need some
tests to verify.
Gerald
On Tue, Dec 13, 2011 at 11:32 PM, Michael B
Thanks. Now, I understand the access pattern Swift is designed for.
Do you know some real applications (or scenarios, use cases) that
benefit from that design (except static image files)?
Gerald
On Wed, Dec 14, 2011 at 1:17 AM, Michael Barton
wrote:
> On Tue, Dec 13, 2011 at 9:21 PM, Huang Zhite
On Dec 28, 2011, at 5:36 AM, Ask Solem wrote:
[...]
>
> amqplib does not support heartbeats so there may be cases
> where the client/server does not properly detect that the socket
> has been closed, this usually only a problem with some particular intermediate
I received a private reply from Ro
Hi,
I'm trying to have both XenAPI (XCP, which I uploaded last week in SID)
to work with Openstack (the version currently in experimental). Despite
bug #909373 which I hacked my way around, nova-compute refuses to start
with the below error.
What am I doing wrong? What's that plugin thing about?
On Thu, Dec 29, 2011, Thomas Goirand wrote:
> What am I doing wrong? What's that plugin thing about? Note that I've
> put stuff in /etc/xapi.d, like the "xenhost" python script, but it
> doesn't seem that's enough.
Did you place it in /etc/xapi.d or /etc/xapi.d/plugins? The latter is
the correct
On Tue, Dec 27, 2011 at 2:11 PM, andi abes wrote:
> Does the swift proxy enforce SSL connections if it's configured with a
> cert/key file? Or is it assumed that there's an external entity performing
> that?
The Swift proxy's SSL support is probably only useful for light
testing - SSL in python (
Do not use the ssl in the python for anything beyond noodling on a proof of
concept.
Between the python ssl and eventlet, ssl is unusably broken.
This should probably be in red in the documentation.
___
Mailing list: https://launchpad.net/~openstack
Pos
Alternate approach:
Give all hosts the .1 gateway address:
diff --git a/nova/network/manager.py b/nova/network/manager.py
index 2d62581..e6a0ba8 100644
--- a/nova/network/manager.py
+++ b/nova/network/manager.py
@@ -477,8 +477,7 @@ class NetworkManager(manager.SchedulerDependentManager):
def
In addition to the rate limiting changes, you can also run multiple copies of
nova-api on different ports and put a load balancer (like ha-proxy) in front.
You may have to set up your proxy to add an X-Forwarded-For header and specify
the
--use_forwarded_for
flag to get things like metadata to w
In some cases when everything is on one interface you need to set your main
bridge to promisc mode to get it to forward properly.
Try:
ip link set promisc on br100
Vish
On Dec 28, 2011, at 2:39 AM, Lucio Cossio wrote:
> Hello Guys, I'm testing a dual node installation of OpenStack Nova with
>
Solved installing from trunk and restarting Rabbitmq on the controller node
Regards
On Wed, Dec 28, 2011 at 12:56 PM, Leandro Reox wrote:
> Hi guys,
>
> Im facing this error http://pastebin.com/8X3j4g8e it seems like nova
> compute cannot redeclare the queue
>
> I tried :
>
> rabbmitmqctl app-st
- Original message -
> On Thu, Dec 29, 2011, Thomas Goirand wrote:
> > What am I doing wrong? What's that plugin thing about? Note that I've
> > put stuff in /etc/xapi.d, like the "xenhost" python script, but it
> > doesn't seem that's enough.
>
> Did you place it in /etc/xapi.d or /etc/
You need chmod a+x /etc/xapi.d/plugins/*
If you just want to install a package, Xen.org are building an RPM for
XenServer / XCP with these plugins:
http://downloads.xen.org/XCP/openstack/openstack-xen-plugins/.
Cheers,
Ewan.
> -Original Message-
> From: openstack-bounces+ewan.mellor=c
On 12/29/2011 10:40 AM, Ewan Mellor wrote:
> You need chmod a+x /etc/xapi.d/plugins/*
>
> If you just want to install a package, Xen.org are building an RPM
> for XenServer / XCP with these plugins:
> http://downloads.xen.org/XCP/openstack/openstack-xen-plugins/.
>
> Cheers,
>
> Ewan.
Hi,
Than
It looks like it creates the file if it's not there -- it's just not smart
enough to create /usr/etc if *that's* missing. I reckon if you fix the path,
everything will work fine.
I've no idea why that path was chosen even for XenServer (CentOS 5 based).
Something like /etc/openstack would be
Hi,
I set up openstack on my second node with devstack as suggested. I
could launch instances from the dashboard on the master node but couldn't
view the vms on the second node with the VNC console in the dashboard. But
the VNC console worked fine with instances launched on the master. On my
la
>
>
>
> In this case, how should i tweak my localrc file to get network access
> for my VMs? I have setup SNAT on the master node to provide external
> network access to machines in the network 192.168.2.0/24. All my VMs are
> given ips in the fixed range 192.168.3.0/24.
>
Is each machine conf
Hi Ewan,
Yes, fixing the path is easy, but *what is in this file*? (see below: it
was what I was specifically asking for)
I've been searching for quite some time on the net, and didn't find any
info about this, and I have no access to a XCP / XenServer machine... Is
that file shipped by default w
29 matches
Mail list logo
