Stefan Teleman wrote:
On 7/4/05, Glynn Foster <[EMAIL PROTECTED]> wrote:
Hey,
I'd like to start the ball rolling in getting an OpenSolaris Desktop
Community launched. Let's face it, there's an awful lot of FUD being
spread around OpenSolaris not being ready for the desktop - it's time to
prove
Thanks, Glynn. Impressive. I can see you weren't kidding on this. :)
Let's give the community some time (your two weeks is fine) to comment
and we'll see where we are and what we can do.
Thanks again,
Jim
Glynn Foster wrote:
Hey,
I'd like to start the ball rolling in getting an Open
On 7/4/05, Glynn Foster <[EMAIL PROTECTED]> wrote:
> I'd like to start the ball rolling in getting an OpenSolaris Desktop
> Community launched. Let's face it, there's an awful lot of FUD being
> spread around OpenSolaris not being ready for the desktop - it's time to
> prove them wrong ;)
I would
James Lick wrote:
I see you've already fixed your problem, but just wanted to add that I
had a similiar problem with the floppy controller not showing up
also. I fiddled around with a bunch of BIOS settings so I can't be
sure which one fixed things, but one of them was to enable acpi in the
Dragan Cvetkovic wrote:
dd: /dev/rdiskette: open: No such file or directory
So, as far as Solaris is concerned, there is no floppy drive at all.
It has worked fine before switching to new ACPI architecture.
I see you've already fixed your problem, but just wanted to add that I
had a simili
I'd like to lead a desktop community focused on JDS. There's
absolutely
New Community Proposal "focused on JDS" ... gets my vote!
+1
Roy
___
opensolaris-discuss mailing list
opensolaris-discuss@opensolaris.org
On 7/4/05, Glynn Foster <[EMAIL PROTECTED]> wrote:
> Hey,
>
> I'd like to start the ball rolling in getting an OpenSolaris Desktop
> Community launched. Let's face it, there's an awful lot of FUD being
> spread around OpenSolaris not being ready for the desktop - it's time to
> prove them wrong ;)
On Tue, 5 Jul 2005, Glynn Foster wrote:
> Hey,
>
> I'd like to start the ball rolling in getting an OpenSolaris Desktop
> Community launched. Let's face it, there's an awful lot of FUD being
> spread around OpenSolaris not being ready for the desktop - it's time to
> prove them wrong ;)
>
> I'd li
Hey,
I'd like to start the ball rolling in getting an OpenSolaris Desktop
Community launched. Let's face it, there's an awful lot of FUD being
spread around OpenSolaris not being ready for the desktop - it's time to
prove them wrong ;)
I'd like to lead a desktop community focused on JDS.
Joerg Schilling wrote:
Torrey McMahon <[EMAIL PROTECTED]> wrote:
Wait...we have the week off? No one ever tells me these things! :-P
Does this mean that we will not see the build 18 sources soon?
Got me on that one. Sorry.
___
opensol
On Mon, 4 Jul 2005 [EMAIL PROTECTED] wrote:
I see quite a few acpica related messages (this is nevada b17) at boot
time, here they are:
Jun 30 12:18:31 lokrum acpica: [ID 972481 kern.warning] WARNING:
AcpiOsWritePort: 70 8 not permitt
ed
Jun 30 12:18:31 lokrum acpica: [ID 815887 kern.noti
Forwarding to the marketing list.
Jim G.
Joerg Schilling wrote:
I am not sure if this should be something
different from the OpenSolaris macsot.
Last week, I had an Idea and the next working I
found a nice drawing at the door of my office.
The drawing had been made by Thomas Hirsch, a colleg
I am not sure if this should be something
different from the OpenSolaris macsot.
Last week, I had an Idea and the next working I
found a nice drawing at the door of my office.
The drawing had been made by Thomas Hirsch, a collegue.
The idea for SchilliX is:
Schilli, the "knight in shining amour
now thermal handlings on my b16 with acpi-user-options=0x2 looks like S10
FCS;
This message posted from opensolaris.org
___
opensolaris-discuss mailing list
opensolaris-discuss@opensolaris.org
Original Message
A Conversation with Tim Marsland
Taking software delivery to a new level.
http://www.acmqueue.com/modules.php?name=Content&pa=showpage&pid=305
--
Tim is interviewed by BSD legend Kirk McKusick and explains how the
lessons lear
Joerg Schilling wrote:
Hi,
while compiling X11R6.8.2 with STudio 10, I get the
following error:
...cc -c -xO4 -xbuiltin=%all -xlibmil -xstrconst -xpentium -Xa -v -zlazyload
-zcombreloc -xstrconst -xildoff -mt -I../../../../extras/Mesa/src/mesa/main
-I../../../../extras/Mesa/src/mesa/math
I ran nmap again to cause a new panic...
I'm running DHCP on a Linksys router, so no hostname is assigned, just 'unknown'
here's the output you requested:
Script started on Mon Jul 04 12:44:54 2005
unknown $PWD# ksh
unknown /var/crash/unknown# ls -l
total 1342300
-rw-r--r-- 1 root root
117846-05 fixes this Xorg ube error. see
http://sunsolve.sun.com/search/document.do?assetkey=urn:cds:docid:1-21-117846-05-1
This message posted from opensolaris.org
___
opensolaris-discuss mailing list
opensolaris-discuss@opensolaris.org
>On 7/4/05, Joerg Schilling <[EMAIL PROTECTED]> wrote:
>> For a lot of the byte-size changes, it is possible to look at the
>> source changes to know whether it is correct. If course not for all
>> of them.
>
>Knowing whether a change is correct, and knowing whether that change
>will have ripp
Hi,
while compiling X11R6.8.2 with STudio 10, I get the
following error:
...cc -c -xO4 -xbuiltin=%all -xlibmil -xstrconst -xpentium -Xa -v -zlazyload
-zcombreloc -xstrconst -xildoff -mt -I../../../../extras/Mesa/src/mesa/main
-I../../../../extras/Mesa/src/mesa/math
-I../../../../extras/Mes
On 7/4/05, Joerg Schilling <[EMAIL PROTECTED]> wrote:
> For a lot of the byte-size changes, it is possible to look at the
> source changes to know whether it is correct. If course not for all
> of them.
Knowing whether a change is correct, and knowing whether that change
will have ripple effec
"Dana H. Myers" <[EMAIL PROTECTED]> wrote:
> > Hi,
> >
> > I have some really strange problems with booting
> > Schillix on a PC with AMD Duron 650 and KT-133
> > chipset (IIRC).
> >
> > The boot hangs after printing:
> >
> > boot scratch memory used: 0x26102c
> >
> > If I remove the Mouse(PS
> The acpi code is full of nonportable bitfield
> definitions writen by Intel.
> It may be that so far nobody did ran into related
> problems.
> Everyone who has problems related to acpi should wait
> until the code
> has been fixed.
I'm not sure it's accurate to say that ACPI CA is full
of
> Hi,
>
> I have some really strange problems with booting
> Schillix on a PC with AMD Duron 650 and KT-133
> chipset (IIRC).
>
> The boot hangs after printing:
>
> boot scratch memory used: 0x26102c
>
> If I remove the Mouse(PS-2), it boots.
>
> There are many ACPI error messages. Is there a
Using acpi-user-opions=0x2 with b16 should have the same behavior as
default S10 - can you confirm this?
Thanks!
Dana
This message posted from opensolaris.org
___
opensolaris-discuss mailing list
opensolaris-discuss@opensolaris.org
Frank Batschulat <[EMAIL PROTECTED]> wrote:
> > If a change is really small, it should be possible to
> > verify the change by just looking at it (doing code review).
> >
> > Jörg
>
> I disagree, even a small change may destabilize a subsystem enough due side
> effects
> not catched during code
A K Saravanan <[EMAIL PROTECTED]> wrote:
> http://www.gnu.org/licenses/license-list.html
>
> Site lists the CDDL in the page: Various Licenses and Comments about Them
>
> Here it says that CDDL is incompatible with GPL, and it urges no to use CDDL.
Well the GPL is incompatible with most OpenSour
Keith M Wesolowski <[EMAIL PROTECTED]> wrote:
> On Fri, Jul 01, 2005 at 05:39:22PM +0200, Joerg Schilling wrote:
> > Eric Schrock <[EMAIL PROTECTED]> wrote:
>
> > If a change is really small, it should be possible to verify the change
> > by just looking at it (doing code review).
>
> Code review
Joerg Schilling <[EMAIL PROTECTED]> wrote:
> Jake Maciejewski <[EMAIL PROTECTED]> wrote:
>
> > It sounds like you're good at getting things working.
> >
> > Do you know how to fix:
> >
> > Undefined first referenced
> > symbol in file
> > __cos
TJ Yang <[EMAIL PROTECTED]> wrote:
> Execuse me for posting my question here not related to this subject.
>
> Hi Joerg
>
> Would you mind answer my question regarding the Schilix 0.1 Livecd creating
> process ?
>
> http://www.opensolaris.org/jive/thread.jspa?threadID=979&tstart=0
>
> Thanks for y
On Mon, 4 Jul 2005, [UTF-8] Jürgen Keil wrote:
I don't see any messages related to the floppy problem at the time I was
accessing it. This is the same machine that had problems with PS/2 based mouse
and keyboard and I had to switch to USB based ones.
Juergen, there is nothing about fdc (or fd)
> I don't see any messages related to the floppy problem at the time I was
> accessing it. This is the same machine that had problems with PS/2 based
> mouse
> and keyboard and I had to switch to USB based ones.
>
>
> Juergen, there is nothing about fdc (or fd) in prtconf -p output:
>
> bash-
>I see quite a few acpica related messages (this is nevada b17) at boot
>time, here they are:
>
>Jun 30 12:18:31 lokrum acpica: [ID 972481 kern.warning] WARNING:
>AcpiOsWritePort: 70 8 not permitt
ed
>Jun 30 12:18:31 lokrum acpica: [ID 815887 kern.notice] ACPI-0519: *** Error:
>Jun 30 12:18:31 l
Torrey McMahon <[EMAIL PROTECTED]> wrote:
> Wait...we have the week off? No one ever tells me these things! :-P
Does this mean that we will not see the build 18 sources soon?
Jörg
--
EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin
[EMAIL PROTECTED](uni)
On Mon, 4 Jul 2005 [EMAIL PROTECTED] wrote:
What happens when you stop vold, and try to read from the PS/2 floppy
using dd?
# /etc/init.d/volmgt stop
# dd if=/dev/rdiskette of=/dev/null bs=18k
Does that report I/O errors?
It does, sort of.
bash-3.00# dd if=/dev/rdiskette of=/dev/null
> bash-3.00# dd if=/dev/rdiskette of=/dev/null bs=18k
> dd: /dev/rdiskette: open: No such file or directory
>
> So, as far as Solaris is concerned, there is no floppy drive at all. It
> has worked fine before switching to new ACPI architecture.
In "prtconf -p" output, is there an "fdc" node list
>> What happens when you stop vold, and try to read from the PS/2 flop=
>py=20
>> using dd?
>>
>># /etc/init.d/volmgt stop
>># dd if=3D/dev/rdiskette of=3D/dev/null bs=3D18k
>>
>> Does that report I/O errors?
>
>It does, sort of.
>
>bash-3.00# dd if=3D/dev/rdiskette of=3D/dev/null bs=3D18
On Fri, 1 Jul 2005, [UTF-8] Jürgen Keil wrote:
(btw, volcheck didn't react to floppies on my machine here)
What happens when you stop vold, and try to read from the PS/2 floppy
using dd?
# /etc/init.d/volmgt stop
# dd if=/dev/rdiskette of=/dev/null bs=18k
Does that report I/O errors?
Wednesday, 6:00pm July 6th, SOSUG #2 !
* Where: iForce meeting rooms, ground floor, 33 Berry St, North Sydney.
* Speaker: Alan Hargreaves - OpenSolaris builds
* Speaker: Boyd Adamson - SMF
* plus general discussion on what has been happening.
* Afterwards: VC Bar for drinks and State of Origin
*
39 matches
Mail list logo
