* David Brownell wrote:
> I'm suspecting your config files are set up wrong.
That is possible, but they worked with a snapshot from 20091229 (after
commit cba1813d5c017e2d20969bb419a856fe15c5ceef).
> On Sunday 14 February 2010, Timo Boettcher wrote:
> > Info : 155 2398 core.c:1350 jtag_interface_
Hi!
* Freddie Chopin wrote:
> > Info : 155 2398 core.c:1350 jtag_interface_init(): clock speed 6000 kHz
>
> Are you sure about the 6MHz JTAG clock?
It worked with the SAME configfiles with openocd from 20091229.
> Is the core frequency above 40MHz after reset?
it is set in a procedure in the con
I'm suspecting your config files are set up wrong.
On Sunday 14 February 2010, Timo Boettcher wrote:
> Info : 155 2398 core.c:1350 jtag_interface_init(): clock speed 6000 kHz
That's fishy. Atmel chips are pretty consistent about always
running at "slow clock" -- 32 KiHz -- after reset.
Which me
> Info : 155 2398 core.c:1350 jtag_interface_init(): clock speed 6000 kHz
Are you sure about the 6MHz JTAG clock? Is the core frequency above
40MHz after reset? Why don't you use standard cfg files?
BTW - LPC2103 works perfectly fine with rc2, but at 1MHz, not 6.
4\/3!!
Hi!
I just tried openocd-0.4.0-rc2 with my olimex-arm-usb-ocd on at91sam7,
but it doesn't work anymore. Log is attached below.
I will git bisect it if necessary (if so, please tell me), known
working (but not necessarily last working) version was from 20091229.
Current head (a2ce3a51dfbc9760e
