2010-09-14 11:46 keltezéssel, Laurent Gauch írta:
Hi,
the new Marvell PXA270M processor has a new TAPID: 0x89265013.
Attached you will find a patch for target/pxa270.cfg that will handle
this.
I have also attached a board/colibri.cfg file to support the Colibri
PXA270 module by Toradex.
H
Hi,
the new Marvell PXA270M processor has a new TAPID: 0x89265013.
Attached you will find a patch for target/pxa270.cfg that will handle this.
I have also attached a board/colibri.cfg file to support the Colibri
PXA270 module by Toradex.
Hope you can use it!
Best regards,
Áron Takács
# Tora
keltezéssel, Takács Áron írta:
Hello,
I have connected the JTAGKey-Tiny directly to the Colibri board
(without buffers) as Marek suggested but the situation remained the
same. After 'reset' or 'flash info 0' I get the following error:
//> reset
JTAG tap: pxa270.cpu tap/device
on
I also changed for the git version of openocd (checked out on sep. 07.)
and compiled it with the debug option enabled.
2010-09-06 10:33 keltezéssel, Marek Vasut írta:
Dne Po 6. září 2010 08:59:21 Takács Áron napsal(a):
Thanky you, Marek!
Yes I use a Colibri board. Bypassing the buffers needs some H
2010-09-06 10:33 keltezéssel, Marek Vasut írta:
Dne Po 6. září 2010 08:59:21 Takács Áron napsal(a):
Thanky you, Marek!
Yes I use a Colibri board. Bypassing the buffers needs some HW hacking
but I'll try it. Thank you!
Keep the DAMNED CC !!
Sorry, I simply pushed Reply...
Hi,
I want to use openocd to reflash PXA270 board (Colibri by Toradex). I am
using JTAGKey-Tiny interface (by Amontec). I can connect the board but I
always get the error message:
'time out writing RX register'. Here is the output for 'reset' and
'flash info 0':
> reset
JTAG tap: pxa270.cpu
