f
ff ff ff ff ff ff ff ff ff ff ff ff
If I run the fillb command again, the remaining bits are cleared.
What can cause this? OpenOCD? CPU???
Best regards,
Marcelo Utikawa da Fonseca
Marcelo Utikawa da Fonseca escreveu:
> I have OpenOCD 0.3.1 working here now.
> GDB is still failing to write
support for it in the OpenOCD.
Is this possible?
Best regards,
Marcelo Utikawa da Fonseca
Øyvind Harboe escreveu:
Try with 0.3.1 and report back. If this is works with 0.2 and
fails with git master head then the list will be interested.
If this is works with git master head, then the list
/Projetos/linux/Linux/ARM/Programas/GDB/elfs/minilpc.elf in 23.154978s
(2.952085 kb/s)
> verify_image
/Projetos/linux/Linux/ARM/Programas/GDB/elfs/minilpc.elf
verified 69996 bytes in 2.292830s
>
When I fix the GDB configuration I will send it to the list.
Best regards,
Marcelo Ut
Great, now it is working! :-)
I put the following line in my gdb config file:
monitor mwb 0xe01fc040 0x01
Thank you!
Best regards,
Marcelo Utikawa da Fonseca
Igor Skochinsky escreveu:
Marcelo,
Try changing the MEMMAP register (see User Manual for details).
On Wed, Dec 16, 2009 at
correct data.
Why sometimes it works and sometimes it do not?
How can I disable this memory to be mapped?
I will search for this, any news I will send to the list!
Thank you very much again!
Best regards,
Marcelo Utikawa da Fonseca
Igor Skochinsky escreveu:
Marcelo,
The current lpc2000.c
k>
What can be wrong?
Best regards,
Marcelo Utikawa da Fonseca
Nico Coesel escreveu:
The first 64 bytes must always be erased. Try to use flashmagic instead of OpenOCD.
These controllers use flash with ECC therefore you cannot program the flash partially / patch single bytes.
Nico C
is not in the hardware or the programmer
because they are the same.
Best regards,
Marcelo Utikawa da Fonseca
Marcelo Utikawa da Fonseca escreveu:
> Hi!
>
> First of all, I am new to this list.
> My name is Marcelo Fonseca. I work in a Brazilian design house and have
> experience w
Breakpoint 1 at 0x234
Note: automatically using hardware breakpoints for read-only addresses.
Breakpoint 1, 0x0234 in main ()
(MiniLPC)
Best regards,
Marcelo Utikawa da Fonseca
-
Tecnequip Tecnologia em Equipamentos
Endereço/Address: R. Ganges, 557
Cidad
