Grant Edwards escreveu:
> ... openocd recognizes the board
> and is able halt the CPU and examine memory and CPU registers.
> It still doesn't connect on every attempt, but other than that
> it's bascially working now.
Nice to know that it works. You can try changing "reset halt" at the
begining
Hi All,
Forgive my ignorance on this as I've never contributed to the open source
community before. I have attached jlink.c with some fixes.
I'd recently gotten a mini2440 a samsung ARM9 based board. I really
wanted to develop under linux and use openocd, but it didn't work so I took
the p
On 2009-08-11, Gary Carlson wrote:
> I am using the same board you are using (except with a J-link
> debugger instead of the Olimex) without too many problems.
>
> You may want to consider moving up to the latest OpenOCD
> software since my recollection is that a number of problems
> were fixed b
I am using the same board you are using (except with a J-link debugger
instead of the Olimex) without too many problems.
You may want to consider moving up to the latest OpenOCD software since my
recollection is that a number of problems were fixed between version 1.0 and
2.0 using that interface.
Has anybody gotten OpenOCD to work with an Atmel AT91SAM9G20?
I found a thread from about 6 months ago that indicated it was
partially working with an Amontek JTAG interface, but there
were problems and the thread contained no indication that the
problems had ever been resolved.
I'm trying to use
Hi Alexei,
On 8/11/09, Alexei Babich wrote:
> Hello all.
>
> I'm trying to use openocd-0.2.0 for debugging the microcontroller imx31 via
> parport.
> I use the unmodified imx31.cfg and parport.cfg of openocd.
> I have a few questions:
> 1. In imx31.cfg mentions "imx31.whatchacallit". The document
Hello all.
I'm trying to use openocd-0.2.0 for debugging the microcontroller imx31 via
parport.
I use the unmodified imx31.cfg and parport.cfg of openocd.
I have a few questions:
1. In imx31.cfg mentions "imx31.whatchacallit". The documentation for imx31 I
read that in the chain may be three TAP
