Is it possible to run X applications from within an lx zone?
If so, would it work for the global zone to run the X server and the lx
zone to provide plasma/KDE?
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.
I'm putting together a home lab / cluster for computational chemistry as a
private individual. I'm thinking OpenIndiana on the head node (for a
desktop) and OmniOS on the compute nodes. Are there any downsides to this
that I should be mindful of?
Thanks!
_
http://wiki.illumos.org/display/illumos/ZFS+and+Advanced+Format+disks
I had the same problem I could never get the sd.conf stuff to work out right
for recognizing my 1.5tb seagates as 4k drives so what I did is backed up my
entire pool. Destroyed my pool and remade the pool with my new 2gb drive
I would like to know will this project eventually get a discussion forum vs
using mailing list.
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
I am trying to decide if I should go with Omnios or OpenIndiana for my
storage needs. So I would like to ask is this project still under active
development? I do not see much activity on the website or any other medium
such a twitter.
___
openindiana-disc
mapid
sharectl set -p nfsmapid_domain=mydomain.local nfs
Then set the appropriate nfs permissions on the zfs file system.
(I'll need to find the details on this bit if you need it)
Mark.
On 17/09/2014 1:39 a.m., Gregory Youngblood wrote:
I don't know if things have changed but a
I've added a switch, but that made things worse.
I now see frequent link loss under any load similar to issues discussed
here about a year ago.
I'm going to flag fibre targets as a dead end, and explore smb or maybe
iscsi on 10G ethernet instead.
Thanks for the input.
Mark.
On
No switch, just a direct cable at present, so point to point.
On 6/09/2014 5:55 a.m., Liam Slusser wrote:
Mark -
No I didn't change any of the HBA bios or QLT parameters. Are you going
into a fibre channel switch?
thanks,
liam
On Fri, Sep 5, 2014 at 1:06 AM, Mark wrote:
Thanks
200Mb/sec read and under 30 for write.
I do have access to an 8Gb one I could try next.
The luns will eventually be for Commvault storage, with a 64k block
size. Trying different zfs block sizes hasn't made a significant
difference to the Windows throughput.
Mark.
On 4/09/2014 9:3
logic for an Emulex HBA.
Can anyone offer suggestions on identifying possible causes ?
Mark.
___
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
On 23/07/2014 5:38 a.m., Harry Putnam wrote:
Mark writes:
On 21/07/2014 7:11 p.m., Harry Putnam wrote:
Setup:
Hardware: HP xw8600 2x Xeon (5470) 3.3 Ghz - 32 GB ram
(goal was to get past whatever prevents oi iso from working when
hdw is in default settings.)
I've al
e, which is
what you have successfully done.
I have in the past resorted to IDE drives, or booting from USB drives,
which can be even more problematic to try to resolve the problem.
So well done, you have made it a few rungs up the experience ladder.
Mark.
__
It could be that once booted, it didn't find the dvd drive again.
On 20/07/2014 5:35 p.m., Harry Putnam wrote:
Setup: Server and Desktop ISO, attempting to boot an HP xw8600
A 2x Xeon (5470) with 32 GB ram and 2 1tb hdd.
I've attempted booting an HP xw8600 from both server and desktop
(freshly
imes in the past 3 days and haven't
had any hangs at syncing file systems . done
Now the keyboard lights blink and the system powers off right after
displaying syncing file systems . done
Hope this helps someone in the future.
-Original Message-
From: Mark Walmsley [mailto:mark.walms..
Hi,
For some reason I can't power off my PC running openindiana build 151a9
Shutdown -i5 -g0 -y
Just sits at
Syncing file systems . done
Same with init 5 or poweroff
Init 0 press any key to reboot works.
Pressing the power button also leaves me syncing file systems . d
not much use to you but
I find it a useful backup for when you have to reinstall windows on a multi
boot machine.
Cheers
Mark
***
This e-mail is confidential and privileged. If you are not the
One suggestion for the future for better reliability.
Avoid using WDC WD20EARS, they aren't great, and hopeless on SAS
controllers.
Avoid mixing disk brands or models in a zpool.
The different behaviour can trigger issues.
On 23/10/2013 7:46 p.m., Clement BRIZARD wrote:
I cleared the "degra
For whatever it's worth, I've been buying SM servers for the last couple
years. I had a motherboard failure and they had a replacement to me next
morning. I didn't have to ship anything except the defective board once I
replaced it.
Mark
On Saturday, October 19, 2013, Bob Friesenha
AIDZ2, and then later if I need the other 4 drives,
can I add them to the same zpool without having to rebuild from scratch?
Thanks
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listi
On 13/07/2013 9:13 a.m., Jim Klimov wrote:
On 2013-07-12 21:52, Bryan N Iotti wrote:
Thank you all for helping make this clearer.
So, in order to compile something using the same tools that are used to
build /stable, I would use pkg:/developer/sunstudio12u1 while for
hipster I'd use GCC 4.6.3?
3@zfs-auto-snap_monthly-2012-01-10-14h35does
not exist
I guess it's saying there is a dependency on that old snapshot that must
not exist anymore, so it can't build the zone properly on the destination
server. How do I resolve this? Am I missing a switch in my command
somewhere?
Th
address
> range (like 192.168) in your non-global zone, and that should find them all.
> >>
> >> Sorry, but I'm not much of a networker.
> >>
> >> In any case, changing your /etc/hostname.YOUR_ADAPTER_NAME file, and
> making sure the info in your /etc/hosts
<
dormitionsk...@hotmail.com> wrote:
>
> On May 19, 2013, at 7:27 PM, Mark Creamer wrote:
>
> > I've been trying for weeks to get a zone off old hardware onto new. Both
> > servers are running exactly the same OI release, 151a7. I have not been
> > able to f
nd edit it so the network vnic is correct for the
new machine
5. I attempt to attach it on the new server, which fails.
Maybe is someone can just tell me what they do to accomplish this, or point
me to a different how-to. I haven't been able to find a
I did try turning on debugging, but as a beginner at driver debugging
I'm not sure I achived the desired result and got no useful info from it.
Anyone have experience with Sata Port Multipliers and can share a few
pointers ?
Mark.
___
OpenIndiana-
For whatever it's worth once you get the networking sorted, every time I've
used the procedure listed here:
http://blog.davekoelmeyer.co.nz/2011/06/05/migrating-an-openindiana-zone-from-one-system-to-another/
it has worked perfectly. Might be useful for you.
Mark
On Thu, Mar 14, 2013
I'm trying to scp some files between a couple oi_151a5 machines. One is
physical, the other is a VM running on VMware. Both show 1000 Mbit links,
but scp is only copying at about 8 Mbps (megabits, not bytes). Any ideas
what I should look at to see where the bottleneck is?
--
t; with OI.
>
> Thanx in advance!
>
> Achim
>
> ___
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss@openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
--
Mark
___
OpenIndiana-discuss mailin
Ricardo, I apologize - I have a RocketRAID but it in fact is not the same
model as you have. So my reply may not apply. Sorry I tried to rely on
memory without verifying. Best regards,
Mark
On Fri, Oct 12, 2012 at 2:14 PM, Pepe Komatsu wrote:
> Hi everybody.
>
> Someone have experi
_
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss@openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@
Boris, logs for these services are located in /var/svc/log. The manifest
contains the other information you might be looking for, under the
tags. Manifests are typically under /var/svc/manifest and then
dig down from there
-Mark
On Wed, Oct 10, 2012 at 5:30 PM, Boris Epstein wrote:
> He
on...definitely cannot risk not being able to start those zones
Mark
On Thu, Sep 13, 2012 at 11:26 PM, Yuri Pankov wrote:
> On Thu, 13 Sep 2012 23:21:30 -0400, Mark Creamer wrote:
>
>> My server is currently at oi151a5, and it's been about a month, so I ran
>> pkg image-up
e
activated?
Thanks
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
gh
correctly? I know how to clone existing zones, but not sure how to do it
from a snapshot.
Thanks
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
s with zfs. I'm hoping to build on the ideas of someone more
knowledgeable to automate my snapshot and recovery efforts.
--
Mark Creamer
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
that zone?
Thanks,
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
om/robert_**soubie <http://www.lulu.com/robert_soubie>
> http://www.smashwords.com/**profile/view/StanleyGWeinbaum<http://www.smashwords.com/profile/view/StanleyGWeinbaum>
>
>
> __**_
> OpenIndiana-disc
days. Later later ...
I just bought a V890 for NZD 72.00 !! but that is for another task.
Glad I didn't have to ship it !!
But I do have a V440 waiting patiently for an OI install.
(4 x CPU, 8Gb mem 4 x 72Gb Hdd)
It can be made available for remote testing.
Mark.
tnx.
gt; that can be used and written by Multiple Windows clients?
>
>
>
>
> ___
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss@openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
--
Mark
adcom in BIOS).
>
>
> ___
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss@openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
s Syropoulos
> Xanthi, Greece
>
>
> ___
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss@openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
Then I can document it this time :-)
Thanks!
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
can only be specified on creation. Ones I like to set include
> atime (off), casesensitivity (mixed, for SMB sharing), nbmand (on),
> utf8only (on), normalization (formD, for cross-OS compatibility),
> checksum (sha256), snapdir (visible - I like to see the .zfs).
>
> Jan
&
Thanks Jan, that sounds easy enough. I'll try it with a non-critical one
that I use for testing but your explanation looks like it will be more
straightforward than I expected. I appreciate the help.
On Thu, Aug 2, 2012 at 4:59 PM, Jan Owoc wrote:
> Hi Mark,
>
> On Thu, Aug 2, 2
o this as needed.
Thanks,
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
call to repair, 6-hour response, etc.)
>
> Cheers,
> --
> Saso
>
> ___
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss@openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
--
Mark
You might give Silicon Mechanics a call. Their engineers are excellent for
helping design a server that works with Solaris and derivatives.
www.siliconmechanics.com
(no financial interest, just a happy customer)
Mark
On Mon, Jul 2, 2012 at 9:21 AM, Open Indiana wrote:
> Hi,
>
> I need
You might supplement the advice you get here with this post from
Constantin Gonzales on his blog. I found it very helpful when I was
setting up my Solaris storage server.
http://constantin.glez.de/blog/2010/07/solaris-zfs-synchronous-writes-and-zil-explained
-Mark
On Mon, Jun 4, 2012 at 11:24 AM
ser running the scp?
Thanks for any advice.
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
Having the same issue after updating global and non-global zones to
oi_151a4. Cant install anything new on the non-global zones.
- Mark
On Fri, May 11, 2012 at 5:13 AM, Milan Jurik wrote:
> Hi,
>
> after update to prestable3, all my local zones are reporting "pkg: No image
> fo
first?
Thanks
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
On 3/05/2012 7:07 a.m., Gordon Ross wrote:
On Wed, May 2, 2012 at 2:47 PM, Richard Elling
wrote:
On May 2, 2012, at 12:25 AM, Mark wrote:
There are two issues.
The first is correct partition alignment, the second ashift value.
In "theory", I haven't tested this yet, manual
a-discuss
>
>
>
> ___
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss@openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
shift of 12 may
produce the desired outcome.
I have used 4k disks (wd20ears) in 3 and 4 disk raidz pools, but they
are used for archiving, so just have data dumped to them.
Few issues on Sata ports, but dodgy on SAS.
Mark
On 1/05/2012 8:23 a.m., Peter Wood wrote:
I'm building a stor
And don't forget to configure or disable the firewall.
That's what my last issue with lack of connectivity turned out to be.
It may be on and blocking by default.
On 2/05/2012 6:13 p.m., Richard Elling wrote:
On May 1, 2012, at 8:41 PM, Tim Dunphy wrote:
hello list
I have attempted to enable
although it does not always avoid a big
impact as some drives can fail during the re-silver process.
Running a full read/write using format is usually enough to fix the bad
block permanently.
If not, then it's RMA'd.
Mark.
On Thu, Apr 12, 2012 at 1:30 PM, Karl Rossing
wro
Yes that wasn't really thinking it through was it :-)
Thanks for the advice James. As a noob, I really appreciate the people
on this list willing to help out.
All is well now
-Mark
On Thu, Apr 12, 2012 at 12:05 PM, James Carlson
wrote:
> Mark Creamer wrote:
>> Thanks Dave and Gary
Now it starts properly. Can anyone confirm for me that the permissions
are correct though? I just want to make sure it's secure and I think
755 might not be restrictive enough??
Thanks again,
Mark
On Wed, Apr 11, 2012 at 7:40 PM, Gary Mills wrote:
> On Wed, Apr 11, 2012 at 06:36:52PM -04
exited with status 1. ]
So I go to /var/log/syslog, but there is nothing there referencing the
problem. Nothing about the service at all, just the "mail" service.
I'm just looking for some help on where the problem might be logged,
since I can't find anything in the above 2 log
On 8/04/2012 3:26 p.m., Sergei wrote:
Rich acm.jhu.edu> writes:
...what FW modifications did they make?
- Rich
They definitely made some as you can't flash Dell drive with Seagate/WD
firmware. Or get support from Seagate/WD for Dell-branded drive.
That is specific to the firmware prote
:/usr/sbin:/sbin
export LD_LIBRARY_PATH=/usr/lib
diskused=`zpool list -H -o capacity ${1} | sed -e 's/%//g' `
#echo $diskused
if [ $diskused -ge 84 ]
then echo "WARNING"
exit 1
fi
if [ $diskused -gt 90 ]
then echo "CRITICAL"
exit 1
fi
if [ $diskused -lt 84 ]
then ech
I was thinking mirror for os raidz1 for data; it's a dell pe with 3 sas drives.
Sent from my iPhone
On 2 Mar 2012, at 16:07, Andrew Gabriel wrote:
> Wallbank, Mark wrote:
>> Hi
>> I am trying to install openindiana (x86) and would like to customise the
>> partitio
another slice for the
data to be shared, however the installer only lets me set one value. I have
tried setting up the partitions first by hand but there doesn't appear to be an
option to leave the fs intact and point it at a slice (format partition). Hope
this makes sense. Any ideas..?
Cheers
Regards
>
> Thorsten
> ___
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss@openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
> ___
> Op
x27;t seem to apply after
rebooting. I'm probably just misunderstanding how to use the configuration
tool, not sure. Thanks for any advice.
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
__
>> OpenIndiana-discuss mailing list
>> OpenIndiana-discuss@openindiana.org
>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
>
> ___
> OpenIndiana-discuss mailing list
> OpenIndiana-d
upport.
definitely off this planet.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
OK excellent. Thanks for your reply Jeppe
On Wed, Jan 25, 2012 at 10:37 AM, Jeppe Toustrup wrote:
> On Wed, Jan 25, 2012 at 16:30, Mark Creamer wrote:
> > I'm trying to get a definitive answer on keeping the time accurate in my
> > non-global zones. Is it only necessary to m
hanks,
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
OK, sorry about that guys. I was assuming it was an available feature and
was obviously incorrect. Thanks for the clarification.
-Mark
On Wed, Jan 18, 2012 at 10:11 AM, LinuxBSDos.com wrote:
> > I'd like to get a better understanding (or have someone correct me where
> > I
stem
would remain unmounted, meaning MySQL could not use it
Are these two things correct? If so, is there a better solution for Item
#2, such that remotely rebooting the server would allow MySQL to start and
be able to use the file system?
--
Mark
___
O
perfectly up until the OS boots, and from
then on it ceases to work.
This is the case on my current TYAN S2915, Supermicro X7DWN+ and the
same issue has been encountered on other motherboards as well.
The keyboard used makes no difference.
Mark.
-Original Message-
From: Mark
finally have found time to make a working build environment, so it may
be time to dig deeper.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
This looks to be a major change to how ON/net is being built.
http://blogs.oracle.com/ali/entry/much_ado_about_nothing_stub
Will this be a show stopper when integrating any future source released
by Oracle ?
Mark.
___
OpenIndiana-discuss mailing
Alan thank you very much and happy holidays
Mark
On Thursday, December 22, 2011, Alan Coopersmith <
alan.coopersm...@oracle.com> wrote:
> On 12/22/11 10:08, Mark Creamer wrote:
>>
>> Makes sense about the licensing. Thank you for that explanation. I see
that the
>> font
On 12/21/11 20:47, Mark Creamer wrote:
>>
>> One of our servers we're trying to move off of Linux and on to OI runs
>> Tomcat and Jasper Reports. Jasper is complaining that it needs Arial
font.
>> I remember once that I was able to install a truetype fonts package from
&
o
get these fonts installed on OI? Im running 151a.
Thank you,
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
all zones.
What's the right way to handle this?
Thank you!
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
On 20/12/2011 6:29 a.m., Gregory Youngblood wrote:
This seems potentially bad all the way around to me. Hopefully this turns out
to be a real, officially blessed release and not a leak.
It doesn't look to be official, since it does contain some closed source
code but is mostly CDDL and even
Oh sorry that's a typo. Sorry to confuse...
Line 3 should read dladm delete-vnic vnic0
But I do get the deletion error even when I actually type it correctly :-)
On Mon, Dec 19, 2011 at 1:42 PM, Jeppe Toustrup wrote:
> On Mon, Dec 19, 2011 at 19:19, Mark Creamer wrote:
> > 1.
ion failed: link busy
Can't seem to figure out what I need to do to delete it.
Thanks!
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
I have used both the 2 & 4 port non-uio 1Gbit and two port 10G non-uio
Supermicro cards with no changes, since early OI releases up to 151.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mail
great.
Man I hope this information helps someone else avoid this issue.
Thank you to all of you who were so willing to help. People like you are
what makes working with complex systems possible, and OpenIndiana in
particular such a great OS.
Best regards,
Mark
On Wed, Dec 14, 2011 at 3:13 PM, Mark
ec 14, 2011, at 11:47 AM, Mark Creamer wrote:
>
> > Just tried from a different OI 151a box, in a different physical location
> > with different Internet access. It fails too, but just to keep things
> > interesting, it fails on a different package:
> >
> > m
ry on my own network to point these installs to? By the
way, last week I did try switching to a different (Internet) repository at
someone's suggestion. I think it was in Germany (.de domain). It failed
too.
'Bout out of ideas (and time)...any other ideas? I greatly appreciate
everyone
OK Thanks for that explanation. Yes it does match.
-Mark
On Tue, Dec 13, 2011 at 6:19 PM, Joshua M. Clulow wrote:
> On 14 December 2011 09:44, Mark Creamer wrote:
> > It does download via wget, but I haven't used shasum before. So I wasn't
> > sure which shasum comman
1edf3999ca
10283476ec06bd1ad87b851e050b2b35c00ac78d
On Tue, Dec 13, 2011 at 4:52 PM, Joshua M. Clulow wrote:
> On Dec 14, 2011 8:32 AM, "Mark Creamer" wrote:
> >
> > Exactly the same URL. I just tried it again to be sure.
>
> What happens if you try and wget the file? Does it work?
Exactly the same URL. I just tried it again to be sure.
On Tue, Dec 13, 2011 at 3:12 PM, Joshua M. Clulow wrote:
> On Dec 14, 2011 5:54 AM, "Mark Creamer" wrote:
> > The thing that is interesting about trying to set up the zones in OI is
> > that it *always* fails on
e, or a problem where the connection drops. Thank you very
much for your thoughts though.
On Tue, Dec 13, 2011 at 1:44 PM, Jeppe Toustrup wrote:
> On Tue, Dec 13, 2011 at 19:26, Mark Creamer wrote:
> > Hi all, I'm hoping someone can give me some ideas I haven't already
. I was able to get a zone successfully installed using
Nexenta Core, but I can't get MySQL 5.5 to install there, which is
ultimately what I want to do once the zones are set up.
Thanks for any ideas.
--
Mark
___
OpenIndiana-discuss mailing list
OpenIn
The only similar thing I've seen is when a mount-point has something in
it. Then the ZFS file system will refuse to mount-over that directory. As
your zone needs to mount before you can boot it, start looking at your ZFS
mounting problem first.
Regards,
--
.\\ark
__
x27;m really confused what I'm doing wrong. Has anyone else experienced a
problem with creating a new zone where the install phase fails due to a
package failing to download?
Thanks
On Wed, Dec 7, 2011 at 6:30 PM, Mark Creamer wrote:
> OK, I'm sorry I didn't catch this before.
ed, Dec 7, 2011 at 4:52 PM, Mark Creamer wrote:
> Thank you. Pretty new with this, so I didn't realize I had additional
> package mirrors available. I should have looked into that possibility. The
> server is running oi_151a
> I'll try the different mirror(s) and see what ha
Thank you. Pretty new with this, so I didn't realize I had additional
package mirrors available. I should have looked into that possibility. The
server is running oi_151a
I'll try the different mirror(s) and see what happens.
Best regards,
Mark
On Wed, Dec 7, 2011 at 4:34 PM, Jeppe Tous
o start
over creating the zone from scratch
2. Use a more reliable package repo (assuming that's what the problem is
with the download)
Thanks!
--
Mark
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.or
The ASUS P6T6 WS Revolution paired-with a Xeon-class "Server" processor.
It's a bit of an older chipset; but, it supports 24GB of RAM.
http://usa.asus.com/Motherboards/Intel_Socket_1366/P6T6_WS_Revolution/#specifications
It does support ECC memory, though with the following caveats:**
6 x DIMM,
benefit, although it does have the benefit of being non-volatile.
I seem to recall mention that the dedicated zil is only used if it's
needed.
I have great performance from a FC target using 3 x SAT2-MV8 and 20 x
2Tb sata disks without an ssd zil.
Mark.
.com/KnowledgebaseArticle16414.aspx
I see there is now a p11 out, so it may need an upgrade and try again.
I see that the latest sg3_utils now has a locate cmd, so it may be time
to compile a newer one again and try it.
Mark.
On Fri, Nov 18, 2011 at 6:29 PM, Jason J. W. Williams
wr
27;t load module: No such device or address
Has anyone had luck getting the BMC driver to work with SM boards?
I have run the bmc from the last nvs release on OpenSolaris on a
Supermicro and it works fine.
I used the SIMSO+ on a X7DWN.
I haven't tried the newer onboard Re
just correct and deliver the
data, and then write it back which in most cases triggers a disk bad
sector replacement and the problem is sorted quickly.
Mark.
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
1 - 100 of 179 matches
Mail list logo
