Hi Qingfang,
On Wed, 2021-01-06 at 16:54 +0800, DENG Qingfang wrote:
> Hi Andrew,
>
> On Wed, Dec 30, 2020 at 11:23 PM Andrew Lunn wrote:
> >
> > On Wed, Dec 30, 2020 at 09:42:09AM +, Marc Zyngier wrote:
> > > > +static irqreturn_t
> > > > +mt7530_irq(int irq, void *data)
> > > > +{
> > > > +
On Fri, 2020-12-11 at 01:03 +0800, DENG Qingfang wrote:
> MT7530 has a global RX length register, so we are actually changing its
> MRU.
> Enable MTU normalization for this reason.
>
> Signed-off-by: DENG Qingfang
> ---
Acked-by: Landen Chao
Best regards,
landen
C45.
- correct fixed-link speed of 2500base-x in dts.
- add MT7531 port mirror setting.
Landen Chao (7):
net: dsa: mt7530: Refine message in Kconfig
net: dsa: mt7530: support full-duplex gigabit only
net: dsa: mt7530: Extend device data ready for adding a new hardware
dt-bindings: net: dsa:
ompatible with 10B/8B encoding of
PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
---
drivers/net/dsa/Kconfig | 6 +-
drivers/net/dsa/mt7530.c | 908 +--
drivers/net/dsa/mt7530.h | 2
Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support.
Signed-off-by: Landen Chao
---
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 44 +++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
b/arch
MT7531.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
---
drivers/net/dsa/mt7530.c | 272 +--
drivers/net/dsa/mt7530.h | 37 +-
2 files changed, 240 insertions(+), 69 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index
Remove 1000baseT_Half to advertise correct hardware capability in
phylink_validate() callback function.
Signed-off-by: Landen Chao
---
drivers/net/dsa/mt7530.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index
Add devicetree binding to support the compatible mt7531 switch as used
in the MediaTek MT7531 switch.
Signed-off-by: Sean Wang
Signed-off-by: Landen Chao
---
.../devicetree/bindings/net/dsa/mt7530.txt| 71 ++-
1 file changed, 68 insertions(+), 3 deletions(-)
diff --git a
Refine message in Kconfig with fixing typo and an explicit MT7621 support.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
---
drivers/net/dsa/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index
Add mt7531 dsa to mt7622-rfb1 board for 5 giga Ethernet ports support.
mt7622 only supports 1 sgmii interface, so either gmac0 or gmac1 can be
configured as sgmii interface. In this patch, change to connet mt7622
gmac0 and mt7531 port6 through sgmii interface.
Signed-off-by: Landen Chao
Hi DENG,
MT7531 mirror port has been fixed by new definition of register base in
header file. The logic of mirror port setting in 7530.c is reused.
@@ -41,6 +42,33 @@ enum mt753x_id {
#define MIRROR_PORT(x)((x) & 0x7)
#define MIRROR_MASK 0x7
+/* R
On Wed, 2020-08-19 at 00:24 +0800, Vladimir Oltean wrote:
> On Tue, Aug 18, 2020 at 03:14:12PM +0800, Landen Chao wrote:
> > Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support.
> >
> > Signed-off-by: Landen Chao
> > ---
> > .../dts/med
Hi Jakub,
These 2 function are used in the same file only.
I'll fix warnings by making 2 functions 'static' in v3.
Landen
On Tue, 2020-08-18 at 23:23 +0800, Jakub Kicinski wrote:
[snip]
> Please fix these W=1 warnings:
>
> ../drivers/net/dsa/mt7530.c:1976:1: warning: no previous prototype for
>
On Wed, 2020-08-19 at 00:09 +0800, Andrew Lunn wrote:
> On Tue, Aug 18, 2020 at 03:14:10PM +0800, Landen Chao wrote:
> > Add new support for MT7531:
> >
> > MT7531 is the next generation of MT7530. It is also a 7-ports switch with
> > 5 giga embedded phys, 2 cpu ports
MT7531, and keep the
same setup logic of existing hardware.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
---
drivers/net/dsa/mt7530.c | 271 ---
drivers/net/dsa/mt7530.h | 37 +-
2 files changed, 234 insertions(+), 74 deletions(-)
diff --git a/drivers
rce mode' without in-band negotiation
which is compatible with 10B/8B encoding of
PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
---
drivers/net/dsa/Kconfig | 6 +-
the definition in the header file to avoid potential conflicts.
- Add wrapper function for mdio read/write to support both C22 and C45.
- correct fixed-link speed of 2500base-x in dts.
- add MT7531 port mirror setting.
Landen Chao (6):
net: dsa: mt7530: Refine message in Kconfig
net: dsa: mt7530: Ex
Refine message in Kconfig with fixing typo and an explicit MT7621 support.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
Reviewed-by: Florian Fainelli
---
drivers/net/dsa/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/Kconfig b/drivers
Add devicetree binding to support the compatible mt7531 switch as used
in the MediaTek MT7531 switch.
Signed-off-by: Sean Wang
Signed-off-by: Landen Chao
---
.../devicetree/bindings/net/dsa/mt7530.txt | 13 +
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a
rce mode' without in-band negotiation
which is compatible with 10B/8B encoding of
PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
---
drivers/net/dsa/Kconfig | 6 +-
Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support.
Signed-off-by: Landen Chao
---
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 50 +++
1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
b/arch
MT7531, and keep the
same setup logic of existing hardware.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
---
drivers/net/dsa/mt7530.c | 271 ---
drivers/net/dsa/mt7530.h | 37 +-
2 files changed, 234 insertions(+), 74 deletions(-)
diff --git a/drivers
Add mt7531 dsa to mt7622-rfb1 board for 5 giga Ethernet ports support.
mt7622 only supports 1 sgmii interface, so either gmac0 or gmac1 can be
configured as sgmii interface. In this patch, change to connect mt7622
gmac0 and mt7531 port6 through sgmii interface.
Signed-off-by: Landen Chao
Add mt7531 dsa to mt7622-rfb1 board for 5 giga Ethernet ports support.
mt7622 only supports 1 sgmii interface, so either gmac0 or gmac1 can be
configured as sgmii interface. In this patch, change to connect mt7622
gmac0 and mt7531 port6 through sgmii interface.
Signed-off-by: Landen Chao
Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support.
Signed-off-by: Landen Chao
---
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 44 +++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
b/arch
Refine message in Kconfig with fixing typo and an explicit MT7621 support.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
Reviewed-by: Florian Fainelli
---
drivers/net/dsa/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/Kconfig b/drivers
Add devicetree binding to support the compatible mt7531 switch as used
in the MediaTek MT7531 switch.
Signed-off-by: Sean Wang
Signed-off-by: Landen Chao
---
.../devicetree/bindings/net/dsa/mt7530.txt | 13 +
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a
ite to support both C22 and C45.
- correct fixed-link speed of 2500base-x in dts.
- add MT7531 port mirror setting.
Landen Chao (6):
net: dsa: mt7530: Refine message in Kconfig
net: dsa: mt7530: Extend device data ready for adding a new hardware
dt-bindings: net: dsa: add new MT7531 bindi
Hi Frank,
If you send next version of patch, you can help to add the Signed-off
line. Thanks.
Signed-off-by: Landen Chao
On Tue, 2020-07-28 at 23:53 +0800, Jakub Kicinski wrote:
> On Tue, 28 Jul 2020 14:27:43 +0200 Frank Wunderlich wrote:
> > From: Landen Chao
>
> Hi gents,
&g
Hi Alex,
Thanks for your review and fixing.
On Thu, 2020-09-17 at 03:50 +0800, Alex Dewar wrote:
[..]
>
> If it is not expected that these functions will throw errors (i.e.
> because the parameters passed will always be correct), we could dispense
> with the use of EINVAL errors and just use BUG*
Hi Alex,
Thanks for your patch. By linux/scripts/checkpatch.pl
On Sun, 2020-09-20 at 03:28 +0800, Alex Dewar wrote:
[..]
> @@ -1631,9 +1635,11 @@ mt7530_setup(struct dsa_switch *ds)
> mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
> PCR_MATRIX_CLR);
>
On Thu, 2020-09-24 at 14:11 +0100, Alex Dewar wrote:
> On 2020-09-24 13:13, Landen Chao wrote:
> > Hi Alex,
> >
> > Thanks for your patch. By linux/scripts/checkpatch.pl
> >
> > On Sun, 2020-09-20 at 03:28 +0800, Alex Dewar wrote:
> > [..]
> >> @@ -1
1000baseT_Half
Remove 1000baseT_Half to advertise correct hardware capability in
phylink_validate() callback function.
Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Landen Chao
---
drivers/net/dsa/mt7530.c | 2 +-
1 file changed, 1 insertion(+),
Remove 1000baseT_Half to advertise correct hardware capability in
phylink_validate() callback function.
Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Landen Chao
Reviewed-by: Andrew Lunn
Reviewed-by: Florian Fainelli
---
v1->v2
- fix the c
otential conflicts.
- Add wrapper function for mdio read/write to support both C22 and C45.
- correct fixed-link speed of 2500base-x in dts.
- add MT7531 port mirror setting.
Landen Chao (6):
net: dsa: mt7530: Refine message in Kconfig
net: dsa: mt7530: Extend device data ready for adding a
Refine message in Kconfig with fixing typo and an explicit MT7621 support.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
Reviewed-by: Florian Fainelli
---
drivers/net/dsa/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/Kconfig b/drivers
Add devicetree binding to support the compatible mt7531 switch as used
in the MediaTek MT7531 switch.
Signed-off-by: Sean Wang
Signed-off-by: Landen Chao
---
Documentation/devicetree/bindings/net/dsa/mt7530.txt | 10 +++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a
Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support.
Signed-off-by: Landen Chao
---
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 44 +++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
b/arch
rce mode' without in-band negotiation
which is compatible with 10B/8B encoding of
PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
---
drivers/net/dsa/Kconfig | 6 +-
MT7531, and keep the
same setup logic of existing hardware.
Signed-off-by: Landen Chao
Signed-off-by: Sean Wang
---
drivers/net/dsa/mt7530.c | 272 +--
drivers/net/dsa/mt7530.h | 37 +-
2 files changed, 240 insertions(+), 69 deletions(-)
diff --git a/drivers
Add mt7531 dsa to mt7622-rfb1 board for 5 giga Ethernet ports support.
mt7622 only supports 1 sgmii interface, so either gmac0 or gmac1 can be
configured as sgmii interface. In this patch, change to connect mt7622
gmac0 and mt7531 port6 through sgmii interface.
Signed-off-by: Landen Chao
41 matches
Mail list logo
