Hello,
I was trying to understand which flow tables/groups/rules enable the
successful transfer of VLAN tagged packets from the VF.
My current understanding is the PF driver creates and configures only
two flow tables:
1. FDB flow table (for regular forwarding of traffic)
2. ACL Ingress and Eg
Thanks so much Saeed for your help.
I am thinking VLAN is not working for me probably because I might have
disabled the code which calls esw_fdb_set_vport_promisc_rule thinking
it is needed only for sniffing capabilities in the PF driver.
I will try to re-enable this code and check if VLAN works
On Tue, Jul 5, 2016 at 12:23 PM, domingo montoya
wrote:
> Thanks so much for the reply. Please find the logs.
>
>
[...]
> # ip link show enp1s0f0
> 3: enp1s0f0: mtu 1500 qdisc mq state
> UP mode DEFAULT qlen 1000
> link/ether e4:1d:2d:c9:c8:9a brd ff:ff:ff:ff:ff:ff
>
> # ethtool -k enp1s0f0
>
Thanks so much for the reply. Please find the logs.
Logs on the remote dedicated driver:
--
# ip link add link enp1s0f0 name enp1s0f0.100 type vlan id 100
# ifconfig enp1s0f0.100 10.2.2.25 up
# ip link show enp1s0f0.100
5: enp1s0f0.100@enp1s0
On Tue, Jul 5, 2016 at 10:37 AM, domingo montoya
wrote:
> Hi,
>
> Is VLAN supported in SRIOV mode for mlx5?
>
For VGT mode vlan is supported by default same as bare-metal.
For VST you need to use ip tool to configure VST vlan: ip link set
eth vf 1 vlan 2 qos 2
note: VGT mode will not work on VF
Hi,
Is VLAN supported in SRIOV mode for mlx5?
Can anyone please help me to:
Enable VLAN guest tagging in mlx5 PF driver?
Do I need to add any E-switch rules to do the same?
My requirement is something like this:
mlx5 VF driver<--->mlx5 PF
driver<->Networ
