Re: etsec2 attached to sgmii phy

2017-10-04 Thread Jörg Willmann
Am 04.10.2017 um 17:34 schrieb Andrew Lunn: On Wed, Oct 04, 2017 at 04:19:23PM +0200, Jörg Willmann wrote: On Wed, 4 Oct 2017, Andrew Lunn wrote: On Wed, Oct 04, 2017 at 07:56:53AM +0200, Jörg Willmann wrote: Hi, we use a QorIQ P1011 connected via SGMII to a switch (Marvell 88E6352). Current

Re: etsec2 attached to sgmii phy

2017-10-04 Thread Andrew Lunn
On Wed, Oct 04, 2017 at 04:19:23PM +0200, Jörg Willmann wrote: > On Wed, 4 Oct 2017, Andrew Lunn wrote: > > >On Wed, Oct 04, 2017 at 07:56:53AM +0200, Jörg Willmann wrote: > >>Hi, > >> > >>we use a QorIQ P1011 connected via SGMII to a switch (Marvell 88E6352). > >>Currently we still use a really o

Re: etsec2 attached to sgmii phy

2017-10-04 Thread Jörg Willmann
On Wed, 4 Oct 2017, Andrew Lunn wrote: On Wed, Oct 04, 2017 at 07:56:53AM +0200, Jörg Willmann wrote: Hi, we use a QorIQ P1011 connected via SGMII to a switch (Marvell 88E6352). Currently we still use a really old linux kernel (2.6.33) successfully. For configuration of the MDIO Bus attached

Re: etsec2 attached to sgmii phy

2017-10-04 Thread Andrew Lunn
On Wed, Oct 04, 2017 at 07:56:53AM +0200, Jörg Willmann wrote: > Hi, > > we use a QorIQ P1011 connected via SGMII to a switch (Marvell 88E6352). > Currently we still use a really old linux kernel (2.6.33) successfully. > > For configuration of the MDIO Bus attached to the corresponding eTSEC/TBI

etsec2 attached to sgmii phy

2017-10-04 Thread Jörg Willmann
Hi, we use a QorIQ P1011 connected via SGMII to a switch (Marvell 88E6352). Currently we still use a really old linux kernel (2.6.33) successfully. For configuration of the MDIO Bus attached to the corresponding eTSEC/TBI Phy we use the following settings in the device tree:

etsec2 attached to sgmii phy

2017-10-03 Thread Jörg Willmann
Hi, we use a QorIQ P1011 connected via SGMII to a switch (Marvell 88E6352). Currently we still use a really old linux kernel (2.6.33) successfully. For configuration of the MDIO Bus attached to the corresponding eTSEC/TBI Phy we use the following settings in the device tree: