Veli-Matti Lintu wrote:
[...]
>> I don't see an issue with the above behavior when ad_select is
>> set to the default value of "stable"; bonding does reselect a new
>> aggregator when all links fail, and it appears to follow the standard.
>
>In my testing ad_select=stable does not reselect
2016-06-22 3:49 GMT+03:00 Jay Vosburgh :
>
> Veli-Matti Lintu wrote:
> [...]
The ports are configured in switch settings (HP Procurve 2530-48G) in
same trunk group (TrkX) and trunk group type is set as LACP.
/proc/net/bonding/bond0 also shows that the three ports belong to same
agg
Veli-Matti Lintu wrote:
[...]
>>>The ports are configured in switch settings (HP Procurve 2530-48G) in
>>>same trunk group (TrkX) and trunk group type is set as LACP.
>>>/proc/net/bonding/bond0 also shows that the three ports belong to same
>>>aggregator and bandwidth tests also support this. In
2016-06-21 18:46 GMT+03:00 Jay Vosburgh :
> Veli-Matti Lintu wrote:
>
>>2016-06-20 17:11 GMT+03:00 zhuyj :
>>> 5. Switch Configuration
>>> ===
>>>
>>> For this section, "switch" refers to whatever system the
>>> bonded devices are directly connected to (i.e., where the
Veli-Matti Lintu wrote:
>2016-06-20 17:11 GMT+03:00 zhuyj :
>> 5. Switch Configuration
>> ===
>>
>> For this section, "switch" refers to whatever system the
>> bonded devices are directly connected to (i.e., where the other end of
>> the cable plugs into). This may be
2016-06-20 17:11 GMT+03:00 zhuyj :
> 5. Switch Configuration
> ===
>
> For this section, "switch" refers to whatever system the
> bonded devices are directly connected to (i.e., where the other end of
> the cable plugs into). This may be an actual dedicated switch devic
Hello,
I have been trying to get the bonding driver working with multiple
aggregators with two switches in mode=802.3ad to handle failing links
properly. The goal is to have always the best possible bonded link in
use if one or physical links fail.
The bonding documentation describes that 802.3ad
