On Tue, Feb 06, 2018 at 11:58:17AM -0500, Sven Van Asbroeck wrote:
> On Tue, Feb 6, 2018 at 11:50 AM, Andrew Lunn wrote:
> > And a DSA driver does not need to be complex. You can start simple,
> > and add more features later.
>
> I see. Would it be possible/practical to start with just phy_read/w
Andrew and Florian, thanks for your input.
On Tue, Feb 6, 2018 at 12:05 PM, Andrew Lunn wrote:
> I would NACK sysfs bin file. Do it right, or don't do it at all.
On Tue, Feb 6, 2018 at 12:47 PM, Florian Fainelli wrote:
> Sven, there is a standard ethtool register dump interface that can be
> us
On 02/06/2018 09:05 AM, Andrew Lunn wrote:
> On Tue, Feb 06, 2018 at 11:58:17AM -0500, Sven Van Asbroeck wrote:
>> On Tue, Feb 6, 2018 at 11:50 AM, Andrew Lunn wrote:
>>> And a DSA driver does not need to be complex. You can start simple,
>>> and add more features later.
>>
>> I see. Would it be p
On Tue, Feb 06, 2018 at 11:41:14AM -0500, Sven Van Asbroeck wrote:
> On Tue, Feb 6, 2018 at 11:14 AM, Andrew Lunn wrote:
> > Rather than invest time in this driver, it would be better to look
> > into writing a DSA driver.
>
> Thank you Andrew. I know little of DSA, but at first sight it appears
On Tue, Feb 6, 2018 at 11:50 AM, Andrew Lunn wrote:
> And a DSA driver does not need to be complex. You can start simple,
> and add more features later.
I see. Would it be possible/practical to start with just phy_read/write,
port_enable/disable in dsa_switch_ops ? And just add a sysfs bin file
f
On Tue, Feb 6, 2018 at 11:14 AM, Andrew Lunn wrote:
> Rather than invest time in this driver, it would be better to look
> into writing a DSA driver.
Thank you Andrew. I know little of DSA, but at first sight it appears to
be a _very_ complicated beast for a switch PHY which only
needs a few stat
On Tue, Feb 06, 2018 at 10:13:55AM -0500, Sven Van Asbroeck wrote:
> v1:
> starting point.
> is there a way to test-run this on supported devices that I don't
> have physical access to - (ks8995, ksz8864) ?
>
> Sven Van Asbroeck (1):
> spi_ks8995: use regmap to access c
v1:
starting point.
is there a way to test-run this on supported devices that I don't
have physical access to - (ks8995, ksz8864) ?
Sven Van Asbroeck (1):
spi_ks8995: use regmap to access chip registers.
drivers/net/phy/spi_ks8995.c | 163 +--
