On Tue, 5 May 2020 12:42:15 +0200, Oleksij Rempel wrote:
> To properly identify this node, we need to use ethernet-phy-id0180.dc80.
> And add missing required properties.
>
> Signed-off-by: Oleksij Rempel
> ---
> .../devicetree/bindings/net/nxp,tja11xx.yaml | 55 ---
> 1 file c
On Tue, May 05, 2020 at 04:01:27PM +0200, Andrew Lunn wrote:
> On Tue, May 05, 2020 at 12:42:15PM +0200, Oleksij Rempel wrote:
> > To properly identify this node, we need to use ethernet-phy-id0180.dc80.
> > And add missing required properties.
> >
> > Signed-off-by: Oleksij Rempel
> > ---
> > .
> > Hi Oleksij
> >
> > reg is normally 0 to 31, since that is the address range for MDIO.
> > Did you use 14 here because of what strapping allows?
>
> Yes. Only BITs 1:3 are configurable. BIT(0) is always 0 for the PHY0 and 1
> for the PHY1
O.K. good.
> > > +required:
> > > + - compatible
>
On Tue, May 05, 2020 at 04:01:27PM +0200, Andrew Lunn wrote:
> On Tue, May 05, 2020 at 12:42:15PM +0200, Oleksij Rempel wrote:
> > To properly identify this node, we need to use ethernet-phy-id0180.dc80.
> > And add missing required properties.
> >
> > Signed-off-by: Oleksij Rempel
> > ---
> > .
On Tue, May 05, 2020 at 12:42:15PM +0200, Oleksij Rempel wrote:
> To properly identify this node, we need to use ethernet-phy-id0180.dc80.
> And add missing required properties.
>
> Signed-off-by: Oleksij Rempel
> ---
> .../devicetree/bindings/net/nxp,tja11xx.yaml | 55 ---
> 1
To properly identify this node, we need to use ethernet-phy-id0180.dc80.
And add missing required properties.
Signed-off-by: Oleksij Rempel
---
.../devicetree/bindings/net/nxp,tja11xx.yaml | 55 ---
1 file changed, 35 insertions(+), 20 deletions(-)
diff --git a/Documentation/de
