2016-05-23 11:49 GMT+02:00 Alexander Stein
:
>> The registers are set to some reset values after the chip is coming out of
>> reset, but we should set them all to the same value, Mathias said that all
>> except for one board he knows are using only one LED per port, but they are
>> often using di
Hi Hauke,
On Monday 23 May 2016 09:12:54, Mehrtens, Hauke wrote:
> > On Thursday 19 May 2016 12:03:10, Mathias Kresin wrote:
> > > 2016-05-19 9:03 GMT+02:00 John Crispin :
> > > > On 19/05/2016 08:57, Alexander Stein wrote:
> > > >> Thanks for the link, I wasn't aware of that patch. I like it in
>
rg; and...@lunn.ch;
> Mehrtens, Hauke
> Subject: Re: [PATCH 1/1 RFC] net/phy: Add Lantiq PHY driver
>
> On Thursday 19 May 2016 12:03:10, Mathias Kresin wrote:
> > 2016-05-19 9:03 GMT+02:00 John Crispin :
> > > On 19/05/2016 08:57, Alexander Stein wrote:
> > >> Thanks
> To be honest I don't know how the PHY LEDs could be set by LED triggers.
> Wouldn't that require to create triggers for each value which can be written
> to LEDxH and LEDxL? In my case the hardware requires some specific setting
> due
> to LED connections.
Supporting all possibilities is not
On Thursday 19 May 2016 12:03:10, Mathias Kresin wrote:
> 2016-05-19 9:03 GMT+02:00 John Crispin :
> > On 19/05/2016 08:57, Alexander Stein wrote:
> >> Thanks for the link, I wasn't aware of that patch. I like it in general,
> >> but there are some things I'd like to get addressed first:
> >> * vr9
2016-05-19 9:03 GMT+02:00 John Crispin :
> On 19/05/2016 08:57, Alexander Stein wrote:
>> Thanks for the link, I wasn't aware of that patch. I like it in general, but
>> there are some things I'd like to get addressed first:
>> * vr9_gphy_of_reg_init() writes uncoditionally to led3h and led3l even
On Thursday 19 May 2016 09:03:26, John Crispin wrote:
> [ changing haukes mail addr to the intel one ]
>
> On 19/05/2016 08:57, Alexander Stein wrote:
> > Hi John,
> >
> > On Thursday 19 May 2016 06:50:56, John Crispin wrote:
> >> On 18/05/2016 18:24, Florian Fainelli wrote:
> >>> CC'ing Andrew,
On Wednesday 18 May 2016 19:01:09, Andrew Lunn wrote:
> > For LEDs, we had a patch series floating around adding LED triggers [1],
> > and it seems to me like the LEDs class subsystem would be a good fit for
> > controlling PHY LEDs, possibly with the help of PHYLIB when it comes to
> > doing the l
[ changing haukes mail addr to the intel one ]
On 19/05/2016 08:57, Alexander Stein wrote:
> Hi John,
>
> On Thursday 19 May 2016 06:50:56, John Crispin wrote:
>> On 18/05/2016 18:24, Florian Fainelli wrote:
>>> CC'ing Andrew, John,
>>
>> also CC'ing Matthias and Hauke. we have had a driver in Op
Hi John,
On Thursday 19 May 2016 06:50:56, John Crispin wrote:
> On 18/05/2016 18:24, Florian Fainelli wrote:
> > CC'ing Andrew, John,
>
> also CC'ing Matthias and Hauke. we have had a driver in OpenWrt/LEDE for
> several years that seems a little more complete than this one.
>
> https://git.led
Hi,
On 18/05/2016 18:24, Florian Fainelli wrote:
> CC'ing Andrew, John,
>
also CC'ing Matthias and Hauke. we have had a driver in OpenWrt/LEDE for
several years that seems a little more complete than this one.
https://git.lede-project.org/?p=source.git;a=blob;f=target/linux/lantiq/patches-4.4/0
> For LEDs, we had a patch series floating around adding LED triggers [1],
> and it seems to me like the LEDs class subsystem would be a good fit for
> controlling PHY LEDs, possibly with the help of PHYLIB when it comes to
> doing the low-level work of registering LEDs and their names with the
> L
CC'ing Andrew, John,
On 05/18/2016 09:03 AM, Alexander Stein wrote:
> This currently only supports PEF7071 and allows to specify max-speed and
> is able to read the LED configuration from device-tree.
>
> Signed-off-by: Alexander Stein
> ---
> The main purpose for now is to set a LED configurati
This currently only supports PEF7071 and allows to specify max-speed and
is able to read the LED configuration from device-tree.
Signed-off-by: Alexander Stein
---
The main purpose for now is to set a LED configuration from device tree and
to limit the maximum speed. The latter one in my case har
14 matches
Mail list logo
