Hi Jerome,
On Wed, Jul 26, 2017 at 9:32 PM, Jerome Brunet wrote:
> On Tue, 2017-07-25 at 18:56 +0200, crow wrote:
>> Hi,
>> Today I did test on ArchLinuxArm the Kernel v4.13-rc2. On downloading
>> the linux git source the network will eventually get stalled. Here a
0.ethernet eth0: Link is Up - 100Mbps/Full - flow
control off
[root@alarm ~]#
whole dmesg [1]. there are some messages like: mdio-mux-mmioreg
c883455c.eth-phy-mux: failed to register mdio-mux bus
/soc/periphs@c8834000/eth-phy-mux
[1] https://defuse.ca/b/s2NpyJlw
Regards,
On Tue, Jun 27, 2017 at
-mainline-v170624-pre-alpha-version-emmc-installation/803/12
On Thu, Jun 15, 2017 at 4:40 PM, crow wrote:
> Hi,
>
> On Sun, Jun 11, 2017 at 7:03 PM, crow wrote:
>> Hi Andrew,
>>
>> On Sun, Jun 11, 2017 at 5:21 PM, Andrew Lunn wrote:
>>>> Thank your f
Hi,
On Sun, Jun 11, 2017 at 7:03 PM, crow wrote:
> Hi Andrew,
>
> On Sun, Jun 11, 2017 at 5:21 PM, Andrew Lunn wrote:
>>> Thank your for the suggestion, and thanks Martin to explaining me over
>>> IRC what actually I should do.
>>>
>>> I recompi
Hi Andrew,
On Sun, Jun 11, 2017 at 5:21 PM, Andrew Lunn wrote:
>> Thank your for the suggestion, and thanks Martin to explaining me over
>> IRC what actually I should do.
>>
>> I recompiled mainline kernel 4.12-rc4 with the Amlogic driver:
>> replaced drivers/net/phy/meson-gxl.c with
>> https://g
an, and they now have an internal_phy_read_status
>> which uses reset_internal_phy if there's a link and some error counter
>> exceeds some magic value.
>
> Hi Crow
>
> You could probably just drop the Amlogic driver into mainline and see
> if it works better. If that s
an, and they now have an internal_phy_read_status
>> which uses reset_internal_phy if there's a link and some error counter
>> exceeds some magic value.
>
> Hi Crow
>
> You could probably just drop the Amlogic driver into mainline and see
> if it works better. If that s
Hi,
On Thu, Jun 8, 2017 at 7:30 PM, crow wrote:
> Hi,
> I have here two problems with Khadas VIM Pro device and Ethernet.
>
> 1) sometimes with the Kernel Linux 4.12-rc4 the Ethernet link is Up
> but only 10Mbps.
> Don't work (either SSH to device nor over serial console
Hi,
I have here two problems with Khadas VIM Pro device and Ethernet.
1) sometimes with the Kernel Linux 4.12-rc4 the Ethernet link is Up
but only 10Mbps.
Don't work (either SSH to device nor over serial console to ping out)
meson8b-dwmac c941.ethernet eth0: Link is Up - 10Mbps/Half - flow
con
