Hi Rob
On Thu, 25 Mar 2021 at 22:26, Rob Herring wrote:
>
> On Thu, 25 Mar 2021 12:42:20 +, Anand Moon wrote:
> > Fix the parsing of check of pattern ethernet-phy-ieee802.3 used
> > by the device tree to initialize the mdio phy.
> >
> > As per the of_mdio below
Hi Heiner
On Thu, 25 Mar 2021 at 18:49, Heiner Kallweit wrote:
>
> On 25.03.2021 13:42, Anand Moon wrote:
> > On most of the Amlogic SoC I observed that Ethernet would not get
> > initialize when try to deploy the mainline kernel, earlier I tried to
> > fix this issue
Hi Andrew,
On Thu, 25 Mar 2021 at 18:27, Andrew Lunn wrote:
>
> On Thu, Mar 25, 2021 at 12:42:20PM +, Anand Moon wrote:
> > Fix the parsing of check of pattern ethernet-phy-ieee802.3 used
> > by the device tree to initialize the mdio phy.
> >
> > As per
Add missing ethernet phy mdio comatible string to help
initialize the phy on Amlogic SoC sbc.
Cc: Neil Armstrong
Cc: Martin Blumenstingl
Signed-off-by: Anand Moon
---
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts| 1 +
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 3
Fix the ethernet phy mdio comatible string to help
initialize the phy on Amlogic SoC sbc.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/ethernet-phy.yaml
Cc: Neil Armstrong
Cc: Martin Blumenstingl
Signed-off-by: Anand Moon
---
arch/arm64/boot/dts/amlogic
Add missing ethernet phy mdio comatible string to help
initialize the phy on Amlogic SoC SBC.
Cc: Neil Armstrong
Cc: Martin Blumenstingl
Signed-off-by: Anand Moon
---
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 1 +
arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi | 1
Add missing ethernet phy mdio comatible string to help
initialize the phy on Amlogic SoC SBC.
Cc: Neil Armstrong
Cc: Martin Blumenstingl
Signed-off-by: Anand Moon
---
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 1 +
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 1
Fix the parsing of check of pattern ethernet-phy-ieee802.3 used
by the device tree to initialize the mdio phy.
As per the of_mdio below 2 are valid compatible string
"ethernet-phy-ieee802.3-c22"
"ethernet-phy-ieee802.3-c45"
Cc: Rob Herring
Signe
Add missing ethernet phy mdio comatible string to help
initiate the phy on Amlogic SoC SBC.
Cc: Neil Armstrong
Cc: Martin Blumenstingl
Signed-off-by: Anand Moon
---
arch/arm/boot/dts/meson8b-ec100.dts | 1 +
arch/arm/boot/dts/meson8b-mxq.dts | 1 +
arch/arm/boot/dts/meson8b
setup.
I do not have ready Odroid C1 (32 bit) setup so please somebody test.
Best Regards
-Anand
Anand Moon (6):
dt-bindings: net: ethernet-phy: Fix the parsing of ethernet-phy
compatible string
arm: dts: meson: Add missing ethernet phy mdio compatible string
arm64: dts: meson-gxbb: Add
setup.
I do not have ready Odroid C1 (32 bit) setup so please somebody test.
Best Regards
-Anand
Anand Moon (6):
dt-bindings: net: ethernet-phy: Fix the parsing of ethernet-phy
compatible string
arm: dts: meson: Add missing ethernet phy mdio compatible string
arm64: dts: meson-gxbb: Add
Hi Martin,
On Tue, 26 Feb 2019 at 17:07, Martin Blumenstingl
wrote:
>
> Hi Anand,
>
> On Tue, Feb 26, 2019 at 11:26 AM Anand Moon wrote:
> >
> > Hi Martin,
> >
> > On Mon, 25 Feb 2019 at 17:49, Anand Moon wrote:
> > >
> > > hi Martin,
&g
Hi Martin,
On Mon, 25 Feb 2019 at 17:49, Anand Moon wrote:
>
> hi Martin,
>
> +Bartosz Golaszewski
>
> On Mon, 25 Feb 2019 at 02:25, Martin Blumenstingl
> wrote:
> >
> > I have seen Anand's your question in [0]:
> > > only issue is I have is
hi Martin,
+Bartosz Golaszewski
On Mon, 25 Feb 2019 at 02:25, Martin Blumenstingl
wrote:
>
> I have seen Anand's your question in [0]:
> > only issue is I have is the each time their is random MAC address so I
> > get new IP from dhcp server.
> > How can I avoid this. I have tried to enable eFu
Hi All,
On Fri, 22 Feb 2019 at 01:05, Simon Huelck wrote:
>
> Am 21.02.2019 um 18:46 schrieb Jerome Brunet:
> > On Thu, 2019-02-21 at 18:27 +0100, Simon Huelck wrote:
> >> Hi,
> >>
> >>
> >>
> >> this was changed recently, with a patch for the EEE stuff , see here:
> >>
> >> https://git.kernel.or
est summary at my end
Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-100.00 sec 10.9 GBytes 936 Mbits/sec0 sender
[ 4] 0.00-100.00 sec 10.9 GBytes 936 Mbits/sec receiver
CPU Utilization: local/sender 5.7% (0.2%u/5.5%s), remote/receiver
11.9% (0.9%u/11.0%s)
iperf3 udp test summary at my end.
Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth Jitter
Lost/Total Datagrams
[ 4] 0.00-100.00 sec 12.5 MBytes 1.05 Mbits/sec 0.025 ms 0/1599 (0%)
[ 4] Sent 1599 datagrams
CPU Utilization: local/sender 0.1% (0.0%u/0.1%s), remote/receiver 0.0%
(0.0%u/0.0%s)
Best Regards
-Anand Moon
>
> ___
> linux-amlogic mailing list
> linux-amlo...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
Hi Jerone,
On 17 November 2016 at 15:50, Jerome Brunet wrote:
> On Wed, 2016-11-16 at 22:36 +0530, Anand Moon wrote:
>> Hi Jerome.
>>
>> On 15 November 2016 at 19:59, Jerome Brunet
>> wrote:
>> >
>> > On some platforms, energy efficient ethernet wi
fig_intr,
> @@ -164,6 +226,7 @@ static struct phy_driver realtek_drvs[] = {
> .phy_id_mask= 0x001f,
> .features = PHY_GBIT_FEATURES,
> .flags = PHY_HAS_INTERRUPT,
> + .probe = &rt
18 matches
Mail list logo
