The device is assigned with random MAC address. It isn't reasonable.
An valid MAC address might have been provided by (uboot) firmware by
device-tree or in chip. It's reasonable to use it to maintain consistency.
This uses the MAC address from device-tree or that in the chip if it's
valid. Otherwi
This makes ftgmac100 driver support NCSI mode. The NCSI is enabled
on the interface if property "use-nc-si" or "use-ncsi" is found from
the device node in device tree.
* No PHY device is used when NCSI mode is enabled.
* The NCSI device (struct ncsi_dev) is created when probing the
devi
NCSI spec (DSP0222) defines several objects: package, channel, mode,
filter, version and statistics etc. This introduces the data structs
to represent those objects and implement functions to manage them.
Also, this introduces CONFIG_NET_NCSI for the newly implemented NCSI
stack.
* The user (e.
The NCSI response packets are sent to MC (Management Controller)
from the remote end. They are responses of NCSI command packets
for multiple purposes: completion status of NCSI command packets,
return NCSI channel's capability or configuration etc.
This defines struct to represent NCSI response p
This introduces two helper functions to create or destroy MDIO
interface. No logical changes introduced except the proper MDIO
names are given when having more than one MDIO bus.
Signed-off-by: Gavin Shan
Acked-by: Joel Stanley
---
drivers/net/ethernet/faraday/ftgmac100.c | 95 +
Bogus PHY interrupts are observed. This masks the PHY interrupt
when the interface works in NCSI mode as there is no attached
PHY under the circumstance.
Signed-off-by: Gavin Shan
Acked-by: Joel Stanley
---
drivers/net/ethernet/faraday/ftgmac100.c | 27 +++
1 file change
This series rebases on David's linux-net git repo ("master" branch). It's
to support NCSI stack on net/farady/ftgmac100.c
The following figure gives an example about how NCSI is deployed: The NCSI is
specified by DSP0222, which can be downloaded from the following link here
(http://www.dmtf.org/si
This introduces NCSI AEN packet handlers that result in (A) the
currently active channel is reconfigured; (B) Currently active
channel is deconfigured and disabled, another channel is chosen
as active one and configured.
Signed-off-by: Gavin Shan
Acked-by: Joel Stanley
---
net/ncsi/Makefile |
The available NCSI packages and channels are probed with help of
NCSI command/response packets. One package and channel should be
selected as active one by which the MC (Management Controller)
can communicate with the far end and external network. The currently
active channel should be disabled and
This matches the driver with devices compatible with "faraday,ftgmac100"
declared in the device tree. Originally, device's name from device
tree for it.
Signed-off-by: Gavin Shan
Acked-by: Joel Stanley
---
drivers/net/ethernet/faraday/ftgmac100.c | 16 +++-
1 file changed, 11 insert
The NCSI command packets are sent from MC (Management Controller)
to remote end. They are used for multiple purposes: probe existing
NCSI package/channel, retrieve NCSI channel's capability, configure
NCSI channel etc.
This defines struct to represent NCSI command packets and introduces
function n
If skb_clear_hash() was invoked due to mangling of relevant headers and
BPF program needs skb->hash later on, we can add a helper to trigger hash
recalculation via bpf_get_hash_recalc().
The helper will return the newly retrieved hash directly, but later access
can also be done via skb context aga
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
Signed-off-by: Philippe Reynes
---
drivers/net/ethernet/smsc/smsc911x.c | 18 ++
1 files changed, 2 insertions(+), 16 deletions(-)
diff --
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes
---
drivers/net/ethernet/sm
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
Signed-off-by: Philippe Reynes
---
drivers/net/ethernet/lantiq_etop.c | 16 ++--
1 files changed, 2 insertions(+), 14 deletions(-)
diff --git
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes
---
drivers/net/ethernet/la
On 16-07-02 12:58 PM, Cong Wang wrote:
On Sat, Jul 2, 2016 at 7:34 AM, Jamal Hadi Salim wrote:
From: Jamal Hadi Salim
Often redirecting or mirroring requires that we set the dstMAC address
of the target device. While it is possible to pipe to a pedit action,
this patch obsoletes the need for
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes
---
drivers/net/ethernet/ca
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
Signed-off-by: Philippe Reynes
---
drivers/net/ethernet/cavium/octeon/octeon_mgmt.c | 25 +
1 files changed, 2 insertions(+), 23 deleti
Add another xmit_mode to pktgen to allow testing xmit functionality
of qdiscs. The new mode "queue_xmit" injects packets at
__dev_queue_xmit() so that qdisc is called.
Signed-off-by: John Fastabend
---
net/core/pktgen.c | 42 --
1 file changed, 40 insert
This adds samples for pktgen to use with new mode to inject pkts into
the qdisc layer. This also doubles as nice test cases to test any
patches against qdisc layer.
Signed-off-by: John Fastabend
---
.../pktgen/pktgen_bench_xmit_mode_queue_xmit.sh| 66
1 file changed, 6
On 16-07-01 05:56 AM, Jamal Hadi Salim wrote:
> On 16-06-30 12:53 PM, John Fastabend wrote:
>> On 16-06-30 03:21 AM, Jamal Hadi Salim wrote:
>>> On 16-06-29 03:47 PM, John Fastabend wrote:
>
>>
>> Taking a look at the link couple differences exist. First the patch
>> linked does a 'netif_xmit_froz
From: John Crispin
Date: Sat, 2 Jul 2016 08:00:50 +0200
> commit 8067302973a1 ("net-next: mediatek: add support for IRQ grouping")
> failed to properly update the irq handling inside mtk_poll_controller()
> causing compile errors if netconsole was enabled. Fix this by updating
> the code to use
From: Tom Herbert
Date: Fri, 1 Jul 2016 14:16:54 -0700
> On Fri, Jul 1, 2016 at 2:07 PM, David Miller wrote:
>> From: Tom Herbert
>> Date: Fri, 1 Jul 2016 13:52:58 -0700
>>
>>> Why are symmetric hashes required?
>>
>> Because they want load balancing, such that one flow only can overrun
>> one
On Sat, Jul 02, 2016 at 02:31:05PM +0200, Christophe JAILLET wrote:
> Silent a few smatch warnings about indentation.
> This include the removal of a 'return' statement in 'resource_tracker.c'.
> This 'return' will still be performed when breaking out of the
> corresponding 'switch' block.
>
> Sig
From: Jiri Pirko
Date: Sat, 2 Jul 2016 11:00:08 +0200
> This is first patchset on a way to introduce ipv4 routing offload support
> in mlxsw driver. Does preparations before router interfaces will
> be introduced in mlxsw.
Series applied, thanks.
From: Michael Chan
Date: Fri, 1 Jul 2016 18:46:18 -0400
> Mostly small miscellaneous changes.
>
> Please review for net-next. Thanks.
Series applied, thanks.
From: Philippe Reynes
Date: Sat, 2 Jul 2016 00:02:35 +0200
> There are two generics functions phy_ethtool_{get|set}_link_ksettings,
> so we can use them instead of defining the same code in the driver.
>
> Signed-off-by: Philippe Reynes
Applied.
From: Philippe Reynes
Date: Sat, 2 Jul 2016 00:02:34 +0200
> The private structure contain a pointer to phydev, but the structure
> net_device already contain such pointer. So we can remove the pointer
> phy in the private structure, and update the driver to use the
> one contained in struct net
From: Stefan Hauser
Date: Fri, 1 Jul 2016 22:35:03 +0200
> When initializing the PHY control register, the FIFO depth bits are
> written without reading the previous register value, i.e. all other
> bits are overwritten with zero. This disables automatic MDI-X
> configuration, which is enabled b
From: Sergio Valverde < sergio.valve...@hpe.com >
Date: Fri, 1 Jul 2016 11:44:30 -0600
> From: Sergio Valverde
>
> The interrupt worker code for the enc28j60 relies only on the TXIF flag to
> determinate if the packet transmission was completed. However the datasheet
> specifies in section 12.1
From: Matt Corallo
Date: Thu, 30 Jun 2016 19:46:16 +
> (resent due to overhelpful mail client corrupting patch)
>
> At least on Meson GXBB, the CORE_IRQ_MTL_RX_OVERFLOW interrupt is thrown
> with the stmmac1000 driver, which does not support set_rx_tail_ptr. With
> this patch and the clock f
Series applied.
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
Signed-off-by: Philippe Reynes
---
drivers/net/ethernet/arc/emac_main.c | 40 +
1 files changed, 2 insertions(+), 38 deleti
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes
---
drivers/net/ethernet/ar
On 07/02/2016 12:43 PM, Jamal Hadi Salim wrote:
From: Jamal Hadi Salim
Extremely useful for setting packet type to host so i dont
have to modify the dst mac address using pedit (which requires
that i know the mac address)
Example usage:
tc filter add dev eth0 parent : protocol ip pref 9 u3
On 07/02/2016 12:43 PM, Jamal Hadi Salim wrote:
From: Jamal Hadi Salim
Suggested-by: Daniel Borkmann
Signed-off-by: Jamal Hadi Salim
Acked-by: Daniel Borkmann
Thanks!
Le 01/07/2016 13:35, Stefan Hauser a écrit :
> When initializing the PHY control register, the FIFO depth bits are
> written without reading the previous register value, i.e. all other
> bits are overwritten with zero. This disables automatic MDI-X
> configuration, which is enabled by default. Fix
On Sat, Jul 2, 2016 at 7:34 AM, Jamal Hadi Salim wrote:
> From: Jamal Hadi Salim
>
> Often redirecting or mirroring requires that we set the dstMAC address
> of the target device. While it is possible to pipe to a pedit action,
> this patch obsoletes the need for that. This is a justified feature
On 02/07/16 16:34, Jamal Hadi Salim wrote:
> From: Jamal Hadi Salim
>
> Often redirecting or mirroring requires that we set the dstMAC address
> of the target device. While it is possible to pipe to a pedit action,
> this patch obsoletes the need for that. This is a justified feature because
> th
From: Jamal Hadi Salim
Often redirecting or mirroring requires that we set the dstMAC address
of the target device. While it is possible to pipe to a pedit action,
this patch obsoletes the need for that. This is a justified feature because
the dst MAC addresses rewrite is such a common use case.
On 16-07-02 10:16 AM, Jamal Hadi Salim wrote:
On 16-07-02 10:07 AM, Nikolay Aleksandrov wrote:
On 02/07/16 16:02, Jamal Hadi Salim wrote:
On 16-07-02 09:49 AM, Nikolay Aleksandrov wrote:
Also a minor suggestion - maybe err out on a
zero mac address, otherwise the user might think the operati
On 16-07-02 10:07 AM, Nikolay Aleksandrov wrote:
On 02/07/16 16:02, Jamal Hadi Salim wrote:
On 16-07-02 09:49 AM, Nikolay Aleksandrov wrote:
Also a minor suggestion - maybe err out on a
zero mac address, otherwise the user might think the operation was successful.
Is a zero mac address wro
On 02/07/16 16:02, Jamal Hadi Salim wrote:
> On 16-07-02 09:49 AM, Nikolay Aleksandrov wrote:
>> On 02/07/16 15:26, Jamal Hadi Salim wrote:
>>> From: Jamal Hadi Salim
>>>
>>> Often redirecting or mirroring requires that we set the MAC address
>>> of the target device. While it is possible to pipe
On 16-07-02 09:49 AM, Nikolay Aleksandrov wrote:
On 02/07/16 15:26, Jamal Hadi Salim wrote:
From: Jamal Hadi Salim
Often redirecting or mirroring requires that we set the MAC address
of the target device. While it is possible to pipe to a pedit action
this obsoletes the need for that. This is
On 02/07/16 15:26, Jamal Hadi Salim wrote:
> From: Jamal Hadi Salim
>
> Often redirecting or mirroring requires that we set the MAC address
> of the target device. While it is possible to pipe to a pedit action
> this obsoletes the need for that. This is justified feature because
> the dst MAC ad
From: Jamal Hadi Salim
Often redirecting or mirroring requires that we set the MAC address
of the target device. While it is possible to pipe to a pedit action
this obsoletes the need for that. This is justified feature because
the dst MAC addresses rewrite is such a common use case.
Sample usag
On Sat, Jul 02, 2016 at 05:39:02PM +0800, Lijun Ou wrote:
This v11
> 28 files changed, 10626 insertions(+), 1 deletion(-)
First version
> 27 files changed, 11670 insertions(+), 11 deletions(-)
1K LOC less, we are moving in right direction.
signature.asc
Description: Digital signature
Silent a few smatch warnings about indentation.
This include the removal of a 'return' statement in 'resource_tracker.c'.
This 'return' will still be performed when breaking out of the
corresponding 'switch' block.
Signed-off-by: Christophe JAILLET
---
drivers/net/ethernet/mellanox/mlx4/intf.c
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes
---
drivers/net/ethernet/xs
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
Signed-off-by: Philippe Reynes
---
drivers/net/ethernet/xscale/ixp4xx_eth.c | 14 ++
1 files changed, 2 insertions(+), 12 deletions(-)
diff --
Hi,
I work with one of the major banks in Cambodia as the director of audit. I have
a proposal for you, a very urgent and quick business that will be completed in
12 working days. I have just discovered documents relating to funds belonging
to a deceased client of our bank,
I went through all
From: Jamal Hadi Salim
I'll make a formal submission sans the header when the kernel patches
makes it in. This version is for someone who wants to play around with
the net-next kernel patches i sent
Signed-off-by: Jamal Hadi Salim
---
include/linux/tc_act/tc_skbedit.h | 2 ++
man/man8/tc-skbe
No other man pages do so, hiding netdev is kind of silly and I don't
mind having my own address normally visible.
---
man/man7/tc-hfsc.7 | 4 ++--
man/man8/tc-hfsc.8 | 4 ++--
man/man8/tc-stab.8 | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/man/man7/tc-hfsc.7 b/man/man7/
From: Jamal Hadi Salim
Extremely useful for setting packet type to host so i dont
have to modify the dst mac address using pedit (which requires
that i know the mac address)
Example usage:
tc filter add dev eth0 parent : protocol ip pref 9 u32 \
match ip src 5.5.5.5/32 \
flowid 1:5 action sk
From: Jamal Hadi Salim
Signed-off-by: Jamal Hadi Salim
---
net/sched/act_skbedit.c | 12
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/net/sched/act_skbedit.c b/net/sched/act_skbedit.c
index 1c4c924..8e573c0 100644
--- a/net/sched/act_skbedit.c
+++ b/net/sched/act_s
From: Jamal Hadi Salim
Suggested-by: Daniel Borkmann
Signed-off-by: Jamal Hadi Salim
---
include/linux/skbuff.h | 10 ++
net/netfilter/nft_meta.c | 9 +
2 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index dc0f
This patch added the verbs to operate PD. It mainly includes
the functions of allocating PD and deallocating PD.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
PATCH v11/v10/v9/v8/v7/v6:
- No change over the PATCH v5
PATCH v5:
- The initial patch which was redes
This patch was for implementing of address handle operations.
It includes three verbs that create ah, query ah and destroy
ah. They is completed independently by RoCE driver.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
PATCH v11:
Remove the non-essential heade
This patch mainly registered some relative verbs for the kernel.
These operation functions will be called by user. For example:
1. modify device
2. query device
3. query_port
4. modify_port
and so on.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
This patch registered IB device when loaded, and unregistered
IB device when removed.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
PATCH v11:
Remove hns_roce_profile_init function for one line of code
which will be called once only according to Leon Romanovsky'
It added reset function for RoCE driver. RoCE is a feature of hns.
In hip06 SoC, in RoCE reset process, it's needed to configure dsaf
channel reset, port and sl map info. Reset function of RoCE is
located in dsaf module, we only call it in RoCE driver when needed.
Signed-off-by: Wei Hu
Signed-off
This patch was mainly for implementing of memory region.
Memory Registration provides mechanisms that allow consumers
to describe a set of virtually contiguous memory locations or
a set of physically contiguous memory locations.
MR operations includes as follows:
1. get dma MR in kernel mode
This patch added the operation for cmd, and added some functions
for initializing eq table and selecting cmd mode.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
PATCH v11:
This fixes the comments given by Leon Romanovsky over the PATCH v10:
Link: https://lkml.
This patch was implementing for Completion Queue(CQ) operations.
A CQ can be used to multiplex work completions from multiple work
queues across queue pairs on the same HCA. CQ as the notification
mechanism for Work Request completions.
CQ operations as follows:
1. create CQ. CQ are created thr
This patch added DTS binding document for HiSilicon RoCE driver.
Signed-off-by: Wei Hu
Signed-off-by: Lijun Ou
---
PATCH v11/v10/v9/v8/v7/v6/v5/v4/v3:
- No change over the PATCH v2
PATCH v2:
This fixes the comments given by Sergei Shtylyov over PATCH v1:
Link: https://lkml.org/lkml/2016/3/11/
This patch mainly set mtu and gid resource. These resource
will be used to set up network transmission in nodes.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
PATCH v11:
- No change over the PATCH v10
PATCH v10:
This fixes the same questions with the comments g
This patch mainly added the initial bare main driver. It
could get the relative configure information of net node.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
PATCH v11:
This fixes comments given by Leon Romanovsky over the PATCH v10:
Link: https://lkml.org/
The HiSilicon Network Substem is a long term evolution IP which is
supposed to be used in HiSilicon ICT SoCs. HNS (HiSilicon Network
Sybsystem) also has a hardware support of performing RDMA with
RoCEE.
The driver for HiSilicon RoCEE(RoCE Engine) is a platform driver and
will support mulitple versi
This patch added event queue support for RoCE driver. It is used
for RoCE interrupt. RoCE includes 32 synchronous event irqs, 1
asynchronous event irq and 1 common overflow irq.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
PATCH v11:
This fixes the comments giv
This patch mainly added reset flow of RoCE engine in RoCE
driver. It is necessary when RoCE is loaded and removed.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
PATCH v11:
This fixes the comments given by Leon Romanovsky over the PATCH v11:
Link: https://lkml.
This patch mainly added the function module which netif notify
registered the protocol stack. It includes interface functions
as follows:
1. The executive called interface of RoCE when the netlink
event that registered protocol stack was generated
2. The executive called interface of
This patch mainly setup hca for RoCE. It will do a series of
initial works, as follows:
1. init uar table, allocate uar resource
2. init pd table
3. init cq table
4. init mr table
5. init qp table
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
This patch mainly initialized the RoCE engine. It is absolutely
necessary to run RoCE. It mainly includes that configure DMAE
user, initialize doorbell and raq operations, enable port.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
PATCH v11:
This fixes hns_roce_
This patch mainly added hem(Hardware Entry Memory) support for RoCE.
It initializes icm which managers the relative memory blocks for
RoCE. The data structures of RoCE will be located in it.
For example, CQ table, QP table and MTPT table so on.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
This patch added the operation for cmd, and added some functions
for initializing eq table and selecting cmd mode.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
PATCH v11:
This fixes the comments given by Leon Romanovsky over the PATCH v10:
Link: https://lkml.
This patch was implementing for queue pair operations. QP Consists
of a Send Work Queue and a Receive Work Queue. Send and receive
queues are always created as a pair and remain that way throughout
their lifetime. A Queue Pair is identified by its Queue Pair Number.
QP operations as follows:
1.
This patch added a new verbs that is getting port immutable.
It is added in the 4.5 kernel and latest. It is necessary to
solve the fail questions for registering ib device.
Signed-off-by: Wei Hu
Signed-off-by: Lijun Ou
---
PATCH v11/v10/v9:
- No change over the PATCH v8
PATCH v8:
- The initial
This patch added Kconfig and Makefile for building RoCE module.
Signed-off-by: Wei Hu
Signed-off-by: Nenglong Zhao
Signed-off-by: Lijun Ou
---
PATCH v11:
hns_roce_icm.o -> hns_roce_hem.o
PATCH v10/v9/v8/v7/v6/v5:
- No change over the PATCH v4
PATCH v4:
This fixes the comments given by Christo
This patch added maintainers for RoCE driver.
Signed-off-by: Wei Hu
Signed-off-by: Lijun Ou
---
PATCH v11/v10/v9:
- No change over the PATCH v8
PATCH v8:
This fixes the comments given by Joe Perches over the PATCH v7:
Link: https://lkml.org/lkml/2016/5/25/396
PATCH v7/v6/v5/v4:
- No change o
Hi!
The Netfilter project presents:
libmnl 1.0.4
libmnl is a minimalistic user-space library oriented to Netlink
developers. There are a lot of common tasks in parsing, validating,
constructing of both the Netlink header and TLVs that are repetitive
and easy to get wrong. This library ai
From: Ido Schimmel
Add the Router General Configuration Register (RGCR), which allows us to
enable the router in the device and configure its various parameters.
Signed-off-by: Ido Schimmel
Signed-off-by: Jiri Pirko
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 78 ++
From: Ido Schimmel
We are going to assign router interfaces (RIFs) to netdevs if an IPv4
address was assigned to them. If one was assigned to a port netdev, this
will translate to the PVID vPort being member in a RIF.
While it's possible for a LAG slave to have an IP address, we can't have
a vPo
From: Ido Schimmel
When removing packet traps we should use action 'discard' instead of
'forward', as some trap IDs we'll add cannot be configured with the
later. However, result is the same, as packets are not trapped to the
CPU.
In the future we will be able to reverse the operation properly b
From: Ido Schimmel
When port isn't bridged it is still possible to invoke switchdev ops and
configure the device's VLAN filters.
However, this will require us to use different Router InterFaces (RIFs)
for the same netdev, instead of one per-netdev as with any other
configuration.
Taking the abo
From: Ido Schimmel
Incoming packets are directed to the router when they match an FDB
entry with action forward to IP router.
Add this action, which was mistakenly named "TRAP".
Signed-off-by: Ido Schimmel
Signed-off-by: Jiri Pirko
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 4 +++-
1 fi
From: Ido Schimmel
Create a skeleton router file and do basic HW initialization of router.
Signed-off-by: Ido Schimmel
Signed-off-by: Jiri Pirko
---
drivers/net/ethernet/mellanox/mlxsw/Makefile | 2 +-
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 9 +++
drivers/net/ethernet/me
From: Jiri Pirko
ip2me:
To instruct HW to send trapped ip2me traffic to kernel, we have to add
this trap. Selection ip2me traffic is introduced later on in this set.
ARPs:
We are going to stop flooding to CPU port when netdev isn't bridged and
only get packets destined to the netdev's IP address
From: Jiri Pirko
This is first patchset on a way to introduce ipv4 routing offload support
in mlxsw driver. Does preparations before router interfaces will
be introduced in mlxsw.
Ido Schimmel (11):
mlxsw: spectrum: Send untagged packets through a port netdev
mlxsw: spectrum: Remove VLANs co
From: Ido Schimmel
Port netdevs (e.g. swXpY) that are not bridged are represented in the
device using a vPort with VID=PVID=1 (the PVID vPort), as untagged
packets entering the switch are internally tagged with the PVID VLAN.
When these packets are routed through a different port netdev they
shou
From: Ido Schimmel
During ports initialization a net device is registered for each
available port, which implies the port is usable. However, a port is
only usable after the different parts of the device (e.g. flooding,
buffers) are initialized. This is especially important now, when we must
init
From: Ido Schimmel
When enabling the router in the device we will represent L3 netdevs
using router interfaces (RIFs). These will be specified whenever
programming routes or neighbours on the netdev.
Introduce the basic RIF infrastructure which allows one to lookup a RIF
by its netdev. Later pat
From: Ido Schimmel
When VLAN devices are created on top of LAG, their underlying vPorts are
configured correctly with LAG membership.
However, the PVID vPort is implicit and already present when the port
netdev is put under LAG, so its LAG membership is never set. Set it
correctly when joining /
From: Ido Schimmel
Add the Router Interface Table Register (RITR), which allows us to
create and configure router interfaces (RIFs).
Signed-off-by: Ido Schimmel
Signed-off-by: Jiri Pirko
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 194 ++
1 file changed, 194 in
Sat, Jul 02, 2016 at 09:26:22AM CEST, j...@resnulli.us wrote:
>From: Jiri Pirko
>
>This patchset introduces router interfaces. At this point the router
>still operates in slowpath, but that's needed in order not to introduce a
>regression.
Scratch this. I have to split it differently :(
>
>Ido
From: Jiri Pirko
ip2me:
To instruct HW to send trapped ip2me traffic to kernel, we have to add
this trap. Selection ip2me traffic is introduced later on in this set.
ARPs:
We are going to stop flooding to CPU port when netdev isn't bridged and
only get packets destined to the netdev's IP address
From: Ido Schimmel
Incoming packets are directed to the router when they match an FDB
entry with action forward to IP router.
Add this action, which was mistakenly named "TRAP".
Signed-off-by: Ido Schimmel
Signed-off-by: Jiri Pirko
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 4 +++-
1 fi
From: Ido Schimmel
When port isn't bridged it is still possible to invoke switchdev ops and
configure the device's VLAN filters.
However, this will require us to use different Router InterFaces (RIFs)
for the same netdev, instead of one per-netdev as with any other
configuration.
Taking the abo
Fri, Jul 01, 2016 at 04:24:54PM CEST, d...@cumulusnetworks.com wrote:
>On 7/1/16 8:04 AM, Jiri Pirko wrote:
>>From: Jiri Pirko
>>
>>L2 upper device needs to propagate neigh_construct/destroy calls down to
>>lower devices. Do this by defining default ndo functions and use them in
>>team, bond, brid
From: Ido Schimmel
We are going to assign router interfaces (RIFs) to netdevs if an IPv4
address was assigned to them. If one was assigned to a port netdev, this
will translate to the PVID vPort being member in a RIF.
While it's possible for a LAG slave to have an IP address, we can't have
a vPo
1 - 100 of 116 matches
Mail list logo
