scenario to connect 2 times 2 satellites to
have more capacity for my L3 VPN
Regards,
Rens
IPSec does not run well over satellite since the TCP headers are also
encrypted
-Original Message-
From: Gmail [mailto:jason.tre...@gmail.com]
Sent: maandag 30 april 2012 13:30
To: Rens
Cc:
Subject: Re: VPN over satellite
Why not use a standard Cisco router or Asa for the routing and
Cisco 7206VXR <=> Cisco 4503 <=> streaming server
Does anyone have any configuration examples for this or tutorials,
everything on the net seems way to complex for my needs.
Regards,
Rens
Sent: mardi 11 mai 2010 15:43
To: Rens
Cc: nanog@nanog.org
Subject: Re: IPv4 Multicast
On Tue, 11 May 2010, Rens wrote:
> Does anyone have any configuration examples for this or tutorials,
> everything on the net seems way to complex for my needs.
Multicast Quick-Start Configuration Gu
er.
With my VLC receiver I can see the channels via SAP, but when I join the
multicast group I don't receive anything.
Could someone help me to troubleshoot this?
Thanks in advance,
Rens
-Original Message-
From: Mikael Abrahamsson [mailto:swm...@swm.pp.se]
Sent: mardi 11 mai 2010
amp; sap listen on all interfaces +
configured a static RP, the one closest to the sender.
With my VLC receiver I can see the channels via SAP, but when I join the
multicast group I don't receive anything.
Could someone help me to troubleshoot this?
Thanks in advance,
Rens
Woot! It was the TTL on the VLC sender that was on default, changed it to 10
and now and I have my video.
Thanks for your help.
_
From: Everton Marques [mailto:everton.marq...@gmail.com]
Sent: mercredi 26 mai 2010 15:42
To: Rens
Cc: Jamie Sobczyk; nanog@nanog.org
Subject: Re: IPv4
?
Do I need to configure the ip cgmp router-only on the 1841 at Receiver?
-Original Message-
From: Rens [mailto:r...@autempspourmoi.be]
Sent: mercredi 26 mai 2010 16:10
To: 'Everton Marques'
Cc: nanog@nanog.org; 'Jamie Sobczyk'
Subject: RE: IPv4 Multicast
Woot! It wa
GigabitEthernet3/0.310
At that point all my L2TPv3 tunnels on the other subinterfaces on Gi3
stopped working.
When I removed the command, everything came back up again.
Is this a bug or am I missing something?
Regards,
Rens
-Original Message-
From: Rens [mailto:r...@autempspourmoi.be
lost.
The wireless link is not saturated but I'm thinking it could have to do
something with the gigabit interfaces and only having 155Mbps on the link
itself?
All ideas welcome.
Regards,
Rens
ed to look a little deeper and do some ping tests.
-Original Message-
From: Adam Goodman [mailto:a...@wispring.com]
Sent: jeudi 10 septembre 2009 11:45
To: Rens
Cc:
Subject: Re: Wireless STM-1 link
Sounds like this might be an Ethernet negotiaton problem
Sent from my phone
On S
Yes all the radio RF levels are 100% ok.
-Original Message-
From: Josh Cheney [mailto:josh.che...@gmail.com]
Sent: jeudi 10 septembre 2009 12:47
To: Rens
Cc: 'Adam Goodman'; nanog@nanog.org
Subject: Re: Wireless STM-1 link
I'm assuming that you have checked all
I have tried both actually, forced and auto, same issue
-Original Message-
From: Florian Weimer [mailto:fwei...@bfk.de]
Sent: jeudi 10 septembre 2009 15:04
To: Rens
Cc: nanog@nanog.org
Subject: Re: Wireless STM-1 link
> All the interfaces are forced to 1Gbps and full duplex.
This ta
Between 20 & 80 Mbps, no real relation between the problem and the time of a
day/higher/lower traffic
_
From: Kieran Murphy [mailto:da...@daffy.za.net]
Sent: jeudi 10 septembre 2009 15:14
To: Rens
Cc: Florian Weimer; nanog@nanog.org
Subject: Re: Wireless STM-1 link
Whats
nd advertise it to my upstream provider peer?
Regards,
Rens
That routes detail command doesn't really give me that much extra info over
the other one.
Could it be that my import at RIPE for my customer AS is set to action
pref=100 instead of 120 is causing this?
Regards,
Rens
-Original Message-
From: Richard A Steenbergen [mailto:r
I have the ability to enable 802.1p on the link, is there a way to
prioritize the OSPF hello packets with this?
_
From: Kenny Sallee [mailto:kenny.sal...@gmail.com]
Sent: jeudi 10 septembre 2009 18:06
To: Rens
Cc: Adam Goodman; nanog@nanog.org
Subject: Re: Wireless STM-1 link
O
Somebody here that is administrator of mails servers of hotmail.com?
Or if anyone knows how to contact them?
Please contact my offline
Somebody here that is administrator of mails servers of hotmail?
Or if anyone knows how to contact them?
Please contact my offline
19 matches
Mail list logo
