Do you mean "Full routes" for BGP ?
Sometimes there are extra charge for BGP, but never heard about full
routes or not.
How can they guarantee whether they provide Full routes or not ?
If some routes are missing, are they going to provide the credit for it ?
Full routes from BGP is always best-
Unless you configure Layer 2 for two interfaces, it's not going to work.
It is invalid from networking principle.
If you have to send the traffic for host in same subnet you configured,
which interface it should send out ?
Basically it may create broadcast storm loop by putting two ip addresses
in
Cisco 7304 may not adequate for service provider.
It's CPU/IO-controller is tied together, and doesn't provide much of
benefit.
Cisco 7200/7300 is enterprise solution pretty much, and doesn't support
distributed CEF.
If you are considering SUP720-3BXL, why not considering RSP720-3CXL ?
Alex
Aa
ASR is embedded linux solution with Quantum Processor architect if I
remember correctly.
So it uses IOS-XE, which is a little bit different from standard IOS.
If you have some room for budget, you can check Foundry MLX/XMR series
router.
It is more geared toward Ethernet Service Router.
But if y
I don't think there is no real answer for your question.
It depends on each company's business objective, the cost, network
topology, and their policy.
MX record is the the mechanism for mail delivery procotol.
It doesn't dictate how to implement.
Depending on mail volume, and network policy, you
Also, adding followings.
5) availability from local power provider(s)
6) local regulation such as fire department safety rules...
7) for your own safety... (120V may not kill people, but 240V can do...)
If you want better, why not just have everything to DC power ?
Something like 48V...
Alex
I still have a couple of Ethernet cards for 10Base2, and cables. ^.^
Yes, if someone unplug or it is loosen in the middle/end, it will be fun.
I guess it's going to be another bagel/coffee time except network
support people.
Alex
Ray Sanders wrote:
> Ugh, please don't remind me of the hell that
If it is the way AT&T have designed their product, there may be no other
way around.
>From AT&T's viewpoint, it will add more complexity to troubleshoot.
If you pay extra, AT&T may have some solution for you.
Alex
Antonio Querubin wrote:
> On Fri, 10 Jul 2009, Jay Nakamura wrote:
>
>> We are
Because of nowadays network scalability demands, Cisco is preparing ASR
14000 series to replace this one, I think. ^^
Basically ASR 14000 is downgrade version of CRS-1, but I consider it is
still developing or beta product.
Alex
Paul Stewart wrote:
> Agreed... we migrated away from GSR to 7600
About 3 months ago, Cisco Account Team was recommending AS14000 for our
company, and we rejected it.
Poor product development management!
Alex
Mohacsi Janos wrote:
>
>
>
> On Mon, 20 Jul 2009, Alex H. Ryu wrote:
>
>>
>> Because of nowadays network scalability dema
It really depends on your application server configuration.
Most people just uses SNMP for this purpose.
Something like net-snmp installed in servers, then monitor the info via
SNMP MIB polling.
Alex
Matthew Huff wrote:
> I think all of these comments are useful. but we are looking for NMS for
What if there is a problem from software, filter, mis-configuration from
one of the routers ?
It will affect whole ring network, not just that problem router.
Also if there is routing protocol bounce because of link flapping, it
will be propagate through the ring forever.
Alex
Serge Vautour wr
What about 7600-S models ?
I think Cisco is claiming that Cisco 7600-S (7606S, etc...) chassis is
ready for less than 50 ms switching time with right software.
For routing, you can setup graceful restart or something like that.
For Cisco ASR9000, I couldn't say much, because it is new product.
W
If there is DDoS attack going on from/to specific /32, sometimes they do
that to avoid too much overload for the network.
Cogent should give the answer for what's going on.
Alex
Zak Thompson wrote:
> We had a problem with cogent about a year ago. Somehow.. cymru was
> announcing a /32 of ours a
It may be.
If the customer is BGP customer, and they have connectivity problem,
your traffic will flow into Verizon since Verizon have supernet.
But within Verizon network, Verizon router doesn't have specific route
info to route into.
So you may see time-out as soon as it hit Verizon network.
Ale
Also one of the reason why not putting default route may be because of
recursive lookup from routing table.
If you have multi-homed site within your network with static route, and
if you use next-hop IP address instead of named interface, you will see
the problem when you have default route in rout
It seems that there was fiber cut because of train derailment around NY
area.
Alex
Blake Pfankuch wrote:
> Any word on the actual cause of the issue?
>
> From: Derek Bodner [mailto:subscribedli...@derekbodner.com]
> Sent: Sunday, December 28, 2008 11:53 AM
> To: Blake Pfankuch
> Cc: Jon Wolberg
I think it is really depending on what kind of provisioning system you
have.
Circuit ID is determined by your provisioning system for CLR/DLR reference.
As long as you can find circuit info quickly, it doesn't matter that much.
Alex
Jay Hennigan wrote:
> We've grown to the point that "The MCI T-
Website www.apnic.net is not accessable from my desktop, either.
But it is responded with ping, so it may be the issue with specific
application such as web server daemon?
Alex
manolo wrote:
> All,
>
> Is anyone else seeing www.apnic.net offline? I have tried from two
> locations and the websit
Not all of Cisco IOS supports 4-byte ASN.
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6554/ps6599/data_sheet_C78-521821.html
Alex
Nick Hilliard wrote:
> On 21/03/2009 16:36, bmann...@vacation.karoshi.com wrote:
>> er... 'parm me sir, but aren't -all- ASNs 4 bytes?
>>
>> i mean,
Hey Chris,
Yes. outa...@outages.org is the one.
Alex
Christopher Morrow wrote:
> isn't there a mailing list for this sort of thing? outages@ I think it is?
>
> (not that I mind, just a little advert for the appropriate forum, and
> a place that MAY have some useful info on this topic)
> -chris
maybe host problem?
I can reach to www.level3.com, but not www.level3.net.
It seems both are belonging to same subnet.
Brandon Galbraith wrote:
> In Chicago, traceroutes are dying in the same place (Denver). Peered out of
> 350 Cermak.
>
> -brandon
>
> On Wed, Apr 15, 2009 at 2:45 PM, Charles M
Theorically it's doable.
But mostly No to your questions.
IXP means Internet eXchange Point.
So it is public Internet. Why do you want to use private IP address ?
Most RIR allocate /24 unit for IXP.
For troubleshooting purpose, it is better to use public IP address as it
is designed.
Unless you w
Today I jumped into one of our routers, and I found that 1.0.0.0/8 is
announced from AS237, which is MERIT.
NetworkNext HopMetric LocPrf Weight Path
*> 1.0.0.0/8 4.59.200.5 0 60 0 (65001
65105) 3356 7018 237 i
Is this supposed to be?
I though
24 matches
Mail list logo
