Re: SDH Fiber Problem

2011-09-27 Thread jacob miller
your assistance on this. Regards, Jacob Miller - Original Message - From: Leigh Porter To: jacob miller Cc: "nanog@nanog.org" Sent: Monday, September 19, 2011 11:17 AM Subject: Re: SDH Fiber Problem It does sound like an MTU issue. Symptoms are typical. Did you try pings e

Re: SDH Fiber Problem

2011-09-20 Thread Daniel Holme
On 19 September 2011 10:20, jacob miller wrote: > I have triend to do a ping with the DF bit set. > Maximum am able to get to is 1600. > This am guessing is because of the fact I have set the mtu size on My > interface to 1600. You could extend this test by sending TCP packets across to simulate

RE: SDH Fiber Problem

2011-09-19 Thread Wallace Keith
>I have been trying to create EoS however am getting the following: >I can ping on point to point >I have BGP up and running >When I try to pass traffic over the link my clients are unable to pass any >meanigful traffic asn browsing is impossible. >Any assistance  and direction in terms of any

Re: SDH Fiber Problem

2011-09-19 Thread BH
ptember 19, 2011 12:23 PM Subject: Re: SDH Fiber Problem Did you try turning it off and on again? ;-)

Re: SDH Fiber Problem

2011-09-19 Thread jacob miller
Did so and am able to ping through Regards, Jacob Miller - Original Message - From: Leigh Porter To: jacob miller Cc: "nanog@nanog.org" Sent: Monday, September 19, 2011 12:23 PM Subject: Re: SDH Fiber Problem Did you try turning it off and on again? ;-) -- Leigh Port

Re: SDH Fiber Problem

2011-09-19 Thread Leigh Porter
--- > From: Leigh Porter > To: jacob miller > Cc: "nanog@nanog.org" > Sent: Monday, September 19, 2011 11:17 AM > Subject: Re: SDH Fiber Problem > > It does sound like an MTU issue. Symptoms are typical. Did you try pings end > to end with DF bit set and full

Re: SDH Fiber Problem

2011-09-19 Thread jacob miller
;High Order Path Signal Label Mismatch" Regards, jacob Miller - Original Message - From: Leigh Porter To: jacob miller Cc: "nanog@nanog.org" Sent: Monday, September 19, 2011 11:17 AM Subject: Re: SDH Fiber Problem It does sound like an MTU issue. Symptoms are typical. D

Re: SDH Fiber Problem

2011-09-19 Thread Leigh Porter
opened. > > Regards, > Jacob Miller > > > > - Original Message - > From: Leigh Porter > To: jacob miller > Cc: "nanog@nanog.org" > Sent: Monday, September 19, 2011 11:10 AM > Subject: Re: SDH Fiber Problem > > What exactly do you mean by m

Re: SDH Fiber Problem

2011-09-19 Thread jacob miller
opening opening .. but the page never gets opened. Regards, Jacob Miller - Original Message - From: Leigh Porter To: jacob miller Cc: "nanog@nanog.org" Sent: Monday, September 19, 2011 11:10 AM Subject: Re: SDH Fiber Problem What exactly do you mean by meaningful traffic? ICMP

Re: SDH Fiber Problem

2011-09-19 Thread Leigh Porter
co switch. > > I have set the mtu on the interface on the end router to 1600 and still > unable to push meaningful traffic. > > Regards, > jacob Miller > > > > - Original Message - > From: Randy Bush > To: jacob miller > Cc: "nanog@nanog.org

Re: SDH Fiber Problem

2011-09-19 Thread jacob miller
2011 10:38 AM Subject: Re: SDH Fiber Problem On 9/19/2011 12:22 AM, jacob miller wrote: > I have tried the pings and am able to ping through with a size of 1600 with > the df-bit set > > without the df-bit am able to get up to 9000. > > The switched on bot ends hav been set to al

Re: SDH Fiber Problem

2011-09-19 Thread Alastair Johnson
On 9/19/2011 12:22 AM, jacob miller wrote: I have tried the pings and am able to ping through with a size of 1600 with the df-bit set without the df-bit am able to get up to 9000. The switched on bot ends hav been set to allow jumbo frames through and the system MTU size and routing MTU sizes

Re: SDH Fiber Problem

2011-09-19 Thread jacob miller
switch. I have set the mtu on the interface on the end router to 1600 and still unable to push meaningful traffic. Regards, jacob Miller - Original Message - From: Randy Bush To: jacob miller Cc: "nanog@nanog.org" Sent: Monday, September 19, 2011 9:55 AM Subject: Re: SDH Fib

Re: SDH Fiber Problem

2011-09-18 Thread Randy Bush
> I can ping on point to point > I have BGP up and running > When I try to pass traffic over the link my clients are unable to pass > any meanigful traffic asn browsing is impossible. mtu? try various size pings. filters? randy

RE: SDH Fiber Problem

2011-09-18 Thread Paseka, Tomas
Checked your MTU settings? -Original Message- From: jacob miller [mailto:mmzi...@yahoo.com] Sent: Monday, 19 September 2011 1:49 PM To: nanog@nanog.org Subject: SDH Fiber Problem Hi , Dont know if this is the correct forum to ask this however I have been having the following problem

SDH Fiber Problem

2011-09-18 Thread jacob miller
Hi , Dont know if this is the correct forum to ask this however I have been having the following problem on SDH network. I have been trying to create EoS however am getting the following: I can ping on point to point I have BGP up and running When I try to pass traffic over the link my clients