1:54pm wingying said:
A quick question, what is the common bandwidth for out-of-band access?
If you administer the metro MPLS for a large city, apparently about
"1,100...modems hidden away in locked filing cabinets in public buildings
around the city." http://weblog.infoworld.com/venezia/ar
Leigh Porter wrote:
And be careful.. It's easy to have simple local passwords, a dial-in modem
and then get pwned.. Were I used to be, we had encrypted modems for POP
dialin.
I have my POTS modem set up to accept PPP too so there's the option of
being a little more secure than a plain text te
And be careful.. It's easy to have simple local passwords, a dial-in modem
and then get pwned.. Were I used to be, we had encrypted modems for POP
dialin.
--
Leigh Porter
On 27/1/09 21:43, "Seth Mattinen" wrote:
> chuck goolsbee wrote:
>> On Tue, 27 Jan 2009 13:54:10 -0500, wingying wrote:
>
chuck goolsbee wrote:
On Tue, 27 Jan 2009 13:54:10 -0500, wingying wrote:
A quick question, what is the common bandwidth for out-of-band access?
Thanks.
Clearwire + POTS as a backup.
POTS + CDMA cellular for me. There's a lot of ways to do it. It really
depends on what you want to do, what
We used a 3rd party Frame Relay network for out of band access.
On 27/1/09 19:37, "chuck goolsbee" wrote:
> On Tue, 27 Jan 2009 13:54:10 -0500, wingying wrote:
>> A quick question, what is the common bandwidth for out-of-band access?
>> Thanks.
>
> Clearwire + POTS as a backup.
>
> --chuck
>
Many times I've used 9600 or 2400 baud over dail-up for OOB of routers. On
the other hand some enterprises use a seperate 1Gbps Vlan for management.
Again it depends on the type of traffic (i.e. snmp(traps), telnet, ssh,
graphical, web, syslog, netflow etc..). For ssh/telnet without the need
Michael K. Smith - Adhost expunged (mksm...@adhost.com):
> > Hi all,
> > A quick question, what is the common bandwidth for out-of-band access?
> > Thanks.
> >
> In the optical world it's often 192 Kb/sec.
I think that was common circa late 90's, I've seen at least two optical
providers that us
On Tue, 27 Jan 2009 13:54:10 -0500, wingying wrote:
> A quick question, what is the common bandwidth for out-of-band access?
> Thanks.
Clearwire + POTS as a backup.
--chuck
-Original Message-
From: wingying [mailto:wingy...@umich.edu]
Sent: Tuesday, January 27, 2009 1:54 PM
To: nanog@nanog.org
Cc: Xu (Simon) Chen
Subject: out-of-band access bandwidth
>Hi all,
>A quick question, what is the common bandwidth for out-of-band access?
>Thanks.
Probably depend
--- wingy...@umich.edu wrote:
A quick question, what is the common bandwidth for out-of-band access?
--
I would say that varies. Size them based on needs and expected traffic levels.
There is no common BW, but it would be small as compared to production li
> Hi all,
> A quick question, what is the common bandwidth for out-of-band access?
> Thanks.
>
In the optical world it's often 192 Kb/sec.
Mike
PGP.sig
Description: PGP signature
On Tue, 27 Jan 2009, wingying wrote:
:
:Hi all,
:A quick question, what is the common bandwidth for out-of-band access?
:Thanks.
That would depend on what your OOB uses for an interface (cli/gui), or
what bandwidth you have to spare. Not necessarily in any given order.
Overprovisioning allevia
12 matches
Mail list logo
