RE: IPv4 Multicast

] Sent: mercredi 26 mai 2010 16:59 To: 'Everton Marques' Cc: nanog@nanog.org; 'Jamie Sobczyk' Subject: RE: IPv4 Multicast One more question: If I would now connect another switch (WS-C3524-XL) between the VLC receiver and the 3560G like this: VLC receiver - 3524XL - 3560G - 1841

RE: IPv4 Multicast

? Do I need to configure the ip cgmp router-only on the 1841 at Receiver? -Original Message- From: Rens [mailto:r...@autempspourmoi.be] Sent: mercredi 26 mai 2010 16:10 To: 'Everton Marques' Cc: nanog@nanog.org; 'Jamie Sobczyk' Subject: RE: IPv4 Multicast Woot! It wa

RE: IPv4 Multicast

Message- From: Jamie Sobczyk [mailto:lans...@cox.net] Sent: vendredi 21 mai 2010 16:52 To: r...@autempspourmoi.be Cc: nanog@nanog.org Subject: RE: IPv4 Multicast Make sure you have "ip multicast-routing" on both routers. On the router interfaces, make sure you have "ip pim sp

Re: IPv4 Multicast

239.255.255.250 igmpv2 Gi0/2, Gi0/24 > 200 239.255.255.255 igmpv2 Gi0/1, Gi0/24 > > -Original Message- > From: Jamie Sobczyk [mailto:lans...@cox.net] > Sent: vendredi 21 mai 2010 16:52 > To: r...@autempspourmoi.be >

RE: IPv4 Multicast

Message- From: Jamie Sobczyk [mailto:lans...@cox.net] Sent: vendredi 21 mai 2010 16:52 To: r...@autempspourmoi.be Cc: nanog@nanog.org Subject: RE: IPv4 Multicast Make sure you have "ip multicast-routing" on both routers. On the router interfaces, make sure you have "ip pim sparse

Re: IPv4 Multicast

On May 21, 2010, at 10:52 AM, Jamie Sobczyk wrote: > On both routers, make sure you have the same rp address assigned and that you > can ping this ip address from both routers. (I prefer to make it a loopback > interface) > "ip pim rp-address w.x.y.z" I also add on the 'override' term at the e

Re: IPv4 Multicast

On May 21, 2010, at 10:52 AM, Jamie Sobczyk wrote: > With my VLC receiver I can see the channels via SAP, but when I join the > multicast group I don't receive anything. verify packets actually land on the receiver (tcpdump, etc) interface. verify that your host has a route for 224/4 pointing o

RE: IPv4 Multicast

Make sure you have "ip multicast-routing" on both routers. On the router interfaces, make sure you have "ip pim sparse-mode" On both routers, make sure you have the same rp address assigned and that you can ping this ip address from both routers. (I prefer to make it a loopback interface) "ip

RE: IPv4 Multicast

15:43 To: Rens Cc: nanog@nanog.org Subject: Re: IPv4 Multicast On Tue, 11 May 2010, Rens wrote: > Does anyone have any configuration examples for this or tutorials, > everything on the net seems way to complex for my needs. Multicast Quick-Start Configuration Guide <http://www.cis

RE: IPv4 Multicast

>>I can see that IGMP is enabled on all interfaces but do I need enable >>something else? You need to have a multicast router or enable IGMP querier on one of your switches. For IGMP snooping to work something on the network has to be sending out PIM hellos or IGMP query messages. Without tha

Re: IPv4 Multicast

; Sent: mardi 11 mai 2010 15:43 > To: Rens > Cc: nanog@nanog.org > Subject: Re: IPv4 Multicast > > On Tue, 11 May 2010, Rens wrote: > > > Does anyone have any configuration examples for this or tutorials, > > everything on the net seems way to complex for my need

RE: IPv4 Multicast

Sent: mardi 11 mai 2010 15:43 To: Rens Cc: nanog@nanog.org Subject: Re: IPv4 Multicast On Tue, 11 May 2010, Rens wrote: > Does anyone have any configuration examples for this or tutorials, > everything on the net seems way to complex for my needs. Multicast Quick-Start Configuration Gu

Re: IPv4 Multicast

On Tue, 11 May 2010, Rens wrote: Does anyone have any configuration examples for this or tutorials, everything on the net seems way to complex for my needs. Multicast Quick-Start Configuration Guide -- Mikae